• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.1
• /
• pp.17-21
• /
• 1974

This study was performed to find out the organic matter content, and what is more, the relation between its content and major morphological properties of cultivated upland soils in Korea. The results were as follows. 1. The average organic matter content of cultivated upland soils was 1.73 percent, mostly ranging from 0.6 to 2.5 percent. 2. Examining the organic matter content by subgroup of cultivated upland soils. It was found 13 percent in volcanic ash yellowish brown Cambisols and 6.3 percent in Humic yellowish brown Entisols, Fluventic yellowish brown Entisols was found 1.0 percent, lowest one. The average organic matter content of Entisols, Cambisols, and Argillisols was 1.1, 2.1, and 1.8 percent respectively. 3. According to organic matter content by texture of profile, the average content of sandy soils was 1.0 percent; 1.5 percent in coarse loamy soils; and 1.8 percent in fine loamy soils. The organic matter content increased with an increased clay content in coarse texture group, but there was no significant difference between fine loamy and clayey soil group. This tendency was also observed in surface soil texture. 4. In the relation between slope and organic matter content, its content in flat area was 1.3 percent that is rather low compared to 1.6 percent of sloping area. Especially, cultivated upland soils ranging brown 15 to 30 percent in slope were 1.8 percent which is relatively high. 5. The organic matter content have nothing to do with suitability groups. Itss ontent of I, II, III, IV and V class was 1.3, 1.6, 1.7, 1.2 and 2.0 percent respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.2
• /
• pp.125-135
• /
• 1994

Field experiment was carried out in order to clarify effects of plastic film mulching on temperature and moisture of rhizosphere soil and their subsequent effects on seedling emergence, earlier growth, vegetative growth and grain yield of sesame. The textural class of the experimental field soil was the sandy loam(Bonyang series) and the variety of sesame planted was "Ansan-ggae". The experiment was conducted by combining four sowing dates of April 25, May 10, May 25, June 10 and two mulching treatments(mulching, non-mulching) over two year of 1991 and 1992. The results were summarized as follows : 1. The daily mean soil temperature of 5cm deep soil was increased by 1.4 to $2.8^{\circ}C$ by plastic film mulching. The average soil water content was increased by 0.5 to 3.0%(V/V) in the drier season, while decreased by 1.0 to 2.0%(V/V) in the rainy season by mulching. 2. The establishment rate of sesame seedling was very sensitive to soil temperature. For normal seedling emergence, from the seeding date to the 7th date after sowing, the daily mean soil temperature higher than $21.0^{\circ}C$ was required at the experimental field conditions. 3. The average soil water content in the range of 14.0 to 21.0%(V/V) at 5cm deep soil seemed not to be limiting for the germination and emergence of sesame. The effect of soil water content on seedling establishment was very small in this range, but the optimum level of soil water content ranged from 14.0 to 15.0%(V/V) in the experimented sandy loam. 4. The wetter the soil profile was, the larger the gap of soil temperature between the mulched and non-mulched condition was. The effect of mulching on the establishment rate of sesame seedlings was much greater in the lower air temperature conditions. However, when the sowing of sesame came earlier than at the date with the daily mean air temperature below $19.0^{\circ}C$, the effects of earlier sowing and mulching were offsetted by the retarded seedling growth due to the low air temperature, and thus earlier sowing with mulching did not enhance the grain yield of sesame.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.93-100
• /
• 2011

Maintenance of adequate soil water potential during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil water movement within and below the rooting zone can facilitate optimal irrigation scheduling aimed at minimizing the adverse effects of water stress on crop growth and development and the leaching of water below the root zone which can have adverse environmental effects. The objective of this study was to evaluate the feasibility of using a portable irrigation controller with an Watermark sensor for the cultivation of drip-irrigated vegetable crops in a greenhouse. The control capability of the irrigation controller for a soil water potential of -20 kPa was evaluated under summer conditions by cultivating 45-day-old tomato plants grown in three differently textured soils (sandy loam, loam, and loamy sands). Water contents through each soil profile were continuously monitored using three Sentek probes, each consisting of three capacitance sensors at 10, 20, and 30 cm depths. Even though a repeatable cycling of soil water potential occurred for the potential treatment, the lower limit of the Watermark (about 0 kPa) obtained in this study presented a limitation of using the Watermark sensor for optimal irrigation of tomato plants where -20 kPa was used as a point for triggering irrigations. This problem might be related to the slow response time and inadequate soil-sensor interface of the Watermark sensor as compared to a porous and ceramic cup-based tensiometer with a sensitive pressure transducer. In addition, the irrigation time of 50 to 60 min at each of the irrigation operation gave a rapid drop of the potential to zero, resulting in over irrigation of tomatoes. There were differences in water content among the three different soil types under the variable rate irrigation, showing a range of water contents of 16 to 24%, 17 to 28%, and 24 to 32% for loamy sand, sandy loam, and loam soils, respectively. The greatest rate increase in water content was observed in the top of 10 cm depth of sandy loam soil within almost 60 min from the start of irrigation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.3
• /
• pp.173-179
• /
• 1989

Characterization and classification of the potential acid sulfate soils found on flood-plains in Yeongnam area were summarized as follows: 1. The "Potential acid sulfate soil" layer(s) were appeared in the around 2-4m substrata of soil profiles and characterized by the fine texture, high reduction and physical unripened soft mud deposits or having higher contents of organic matter with dark color. 2. The contents of total sulfur (T-S) in those soils were ranged around 0.45-0.9% and the materials exhibited a strong acidity upon the oxidation with $H_2O_2$. Although the T-S contents was low as much as 0.15%, the sulfidic materials were also acidified strongly by the oxidation with $H_2O_2$ in the condition of lower content of carbonates. As defined in Soil Taxonomy of USDA, most of the sulfidic materials contained less than 3 times carbonate ($CaCO_3$ equivalent wt. %), but there were some which abundant in shell fragments, contained more than 3 times carbonate by weight percentage and that not much acidified by the oxidation with $H_2O_2$. 3. The contents of T-S correlated negatively with the pH oxidized by $H_2O_2$ and with the fizzing time (minutes) due to addition of $H_2O_2$. 4. The potential acid sulfate soils could be defined as soil materials that had sulfidic layer(s) more than 20cm thick within 4m of the soil profile and contained more than 0.15% of T-S with less than 3 times carbonate ($CaCO_3$ equiv. %). A tentative interpretative soil classification system was proposed, i.e., "Weak potential acid sulfate (T-S, 0.15-0.5%)", "Moderate potential acid sulfate (T-S, 0.5-0.75%)", and "Strong potential acid sulfate (T-S, more than 0.75%)". Finally, it was proposed that the "Detailed soil survey with high intensity" should be carried out in the areas of agricultural engineering works such as arableland readjustment works, in advance.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.3
• /
• pp.104-120
• /
• 1979

I. Title of the Study Studies on the Development of Improved Subsurface Drainage Methods. -Drainage Performance of Various Subsurface Drain Materials- II. Object of the Study Studies were carried out to select the drain material having the highest performance of drainage; And to develop the water budget model which is necessary for the planning of the drainage project and the establishment of water management standards in the water-logged paddy field. III. Content and Scope of the Study 1. The experiment was carried out in the laboratory by using a sand tank model. The drainage performance of various drain materials was compared evaluated. 2. A water budget model was established. Various parameters necessary for the model were investigated by analyzing existing data and measured data from the experimental field. The adaptability of the model was evaluated by comparing the estimated values to the field data. IV. Results and Recommendations 1. A corrugated tube enveloped with gravel or mat showed the highest drainage performance among the eight materials submmitted for the experiment. 2. The drainage performance of the long cement tile(50 cm long) was higher than that of the short cement tile(25 cm long). 3. Rice bran was superior to gravel in its' drain performance. 4. No difference was shown between a grave envelope and a P.V.C. wool mat in their performance of drainage. Continues investigation is needed to clarify the envelope performance. 5. All the results described above were obtained from the laboratory tests. A field test is recommended to confirm the results obtained. 6. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as follows; $$D=\Sigma\limit_{t=1}^{n}(Et-R_{\ell}-I+W_d)..........(17)$$ 7. Among the various empirical formulae for potential evapotranspiration, Penman's formular was best fit to the data observed with the evaporation pans in Jinju area. High degree of positive correlation between Penman;s predicted data and observed data was confirmed. The regression equation was Y=1.4X-22.86, where Y represents evaporation rate from small pan, in mm/100 days, and X represents potential evapotranspiration rate estimated by Penman's formular. The coefficient of correlation was r=0.94.** 8. To estimate evapotranspiration in the field, the consumptive use coefficient, Kc, was introduced. Kc was defined by the function of the characteristics of the crop soil as follows; $Kc=Kco{\cdot}Ka+Ks..........(20)$ where, Kco, Ka ans Ks represents the crop coefficient, the soil moisture coefficient, and the correction coefficient, respectively. The value of Kco and Ka was obtained from the Fig.16 and the Fig.17, respectively. And, if $Kco{\cdot}Ka{\geq}1.0,$ then Ks=0, otherwise, Ks value was estimated by using the relation; $Ks=1-Kco{\cdot}Ka$. 9. Into type formular, $r_t=\frac{R_{24}}{24}(\frac{b}{\sqrt{t}+a})$, was the best fit one to estimate the probable rainfall intensity when daily rainfall and rainfall durations are given as input data, The coefficient a and b are shown on the Table 16. 10. Japanese type formular, $I_t=\frac{b}{\sqrt{t}+a}$, was the best fit one to estimate the probable rainfall intensity when the rainfall duration only was given. The coefficient a and b are shown on the Table 17. 11. Effective rainfall, Re, was estimated by using following relationships; Re=D, if $R-D\geq}0$, otherwise, Re=R. 12. The difference of rainfall amount from soil moisture depletion was considered as the amount of drainage required. In this case, when Wd=O, Equation 24 was used, otherwise two to three days of lag time was considered and correction was made by use of storage coefficient. 13. To evaluate the model, measured data and estimated data was compared, and relative error was computed. 5.5 percent The relative error was 5.5 percent. 14. By considering the water budget in Jinju area, it was shown that the evaporation amount was greater than the rainfall during period of October to March in next year. This was the behind reasonning that the improvement of surface drainage system is needed in Jinju area.

• Food Science of Animal Resources
• /
• v.26 no.4
• /
• pp.411-417
• /
• 2006

This study was conducted to evaluate the physicochemical properties of pork loin marinated with a solution of Nan and sodium tripolyphosphate, and the sensory attributes of tomato sauce-stewed products using marinated loin. Pork loin samples were cut $(3{\times}3{\times}2cm)$ and assigned to 3 treatment groups [C; unmarinated control (100% distilled water), T1; 10% sodium chloride, T2; 10% sodium chloride + 3% sodium tripolyphosphate]. Samples were marinated for 24hr at $5^{\circ}C$. The uptake of marinade in the treatment groups was significantly greater (p<0.05) than that of C, however no significant difference between the two treatments was observed. Cooking losses were highest (p<0.05) for T1, while lowest (p<0.05) for T2. All marinated loins had a significantly higher (p<0.05) yield than the control. The pH of the marinade solution ranged from 7.00 for T1 to 8.47 for T2. The two marinated loins had a significantly higher (p<0.05) $pH_{24}$ than the control. The water holding capacity (WHC) was highest for T2, and lowest for T1. CIE $L^*,\;a^*,\;b^*$ tended to be slightly higher in the control than either treatment group. The shear force value $(kg/cm^2)$ of yaw meat did not differ between the control and marinated muscle samples. However, cooked meat had a significantly lower (p<0.05) shear force value in T2 than C and T1. Hardness values were significantly lower (p<0.05) for both treatments compared with the control. There were no differences in texture profile, except hardness, between the control and the two treatments. Regarding the sensory evaluation of tomato sauce-stewed products manufactured with marinated pork loin, the treatment groups scored marginally well in tenderness, juiciness and overall acceptability, while the flavor score of the control was significantly higher than those of T1 and T2.

• Food Science of Animal Resources
• /
• v.30 no.5
• /
• pp.826-832
• /
• 2010

A total of ninety swine ($79.0{\pm}2.2\;kg$) were employed for 58 d to determine the meat quality of pigs fed fermented agricultural by-products (FAB) mainly consisting of brewers grain shell. FAB was replaced with commercial feed at dietary levels of 20%, 40%, 60%, 80%, and 100% (T1) and 30%, 60%, 100%, 100%, and 100% (T2) at 1, 2, 3, 4 and 5-9 wk, respectively. Compared with the control (CON) feed, FAD feed had lower moisture and nitrogen-free extract content, and higher crude fat, crude fiber, and total calorie (p<0.05). The protein content, amino acid profile, and pH values of pork loin were not affected by dietary treatment. However, higher moisture, crude ash, and meat cholesterol, and lower fat, were found in CON compared with treatment (p<0.05). FAB treatment significantly improved drip loss and cooking loss value (p<0.05), and increased the CIE $L^*$ values of loin and back-fat surface, whereas it decreased the CIE $a^*$ values of loin surface (pp<0.05). The results indicate that dietary FAB affected meat cholesterol and fat content, and improved drip loss and cooking loss, but had no affect on amino acid composition.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.4
• /
• pp.176-184
• /
• 2011

Cold air on sloping surfaces flows down to the valley bottom in mountainous terrain at calm and clear nights. Based on the assumption that the cold air flow may be the same as the water flow, current models estimate temperature drop by regarding the cold air accumulation at a given location as the water-like free drainage. At a closed catchment whose outlet is blocked by man-made obstacles such as banks and roads, however, the water-like free drainage assumption is no longer valid because the cold air accumulates from the bottom first. We developed an empirical model to estimate quantitatively the effect of cold pool on nocturnal temperature in a closed catchment. In our model, a closed catchment is treated like a "vessel", and a digital elevation model (DEM) was used to calculate the maximum capacity of the cold pool formed in a closed catchment. We introduce a topographical variable named "shape factor", which is the ratio of the cold air accumulation potential across the whole catchment area to the maximum capacity of the cold pool to describe the relative size of temperature drop at a wider range of catchment shapes. The shape factor is then used to simulate the density profile of cold pool formed in a given catchment based on a hypsometric equation. The cold lake module was incorporated with the existing model (i.e., Chung et al., 2006), generating a new model and predicting distribution of minimum temperature over closed catchments. We applied this model to Akyang valley (i.e., a typical closed catchment of 53 $km^2$ area) in the southern skirt of Mt. Jiri National Park where 12 automated weather stations (AWS) are operational. The performance of the model was evaluated based on the feasibility of delineating the temperature pattern accurately at cold pool forming at night. Overall, the model's ability of simulating the spatial pattern of lower temperature were improved especially at the valley bottom, showing a similar pattern of the estimated temperature with that of thermal images obtained across the valley at dawn (0520 to 0600 local standard time) of 17 May 2011. Error in temperature estimation, calculated with the root mean square error using the 10 low-lying AWSs, was substantially decreased from $1.30^{\circ}C$ with the existing model to $0.71^{\circ}C$ with the new model. These results suggest the feasibility of the new method in predicting the site-specific freeze and frost warning at a closed catchment.

• Food Science of Animal Resources
• /
• v.31 no.2
• /
• pp.250-256
• /
• 2011

This study was conducted to evaluate the effect of whole egg supplementation on the blood lipid profiles and cholesterol levels of C57BL/6 mice. Sixty-six mice were divided into two groups: normal-diet supplemented and high-cholesterol diet supplemented. Lyophilized whole egg powder was mixed with the two diets at 2 and 10%: normal diet only, normal diet with 2 and 10% whole egg powder, high cholesterol diet only, high cholesterol diet with 2 and 10% whole egg powder. The mixed diets were fed for 5 wk and feeding condition (body weight change, feed intake, and feed efficiency ratio (FER)), blood lipid profiles (total cholesterol (TC), triglyceride (TG), high density lipoprotein-cholesterol (HDL-C), low density lipoprotein cholesterol, hepatic and fecal lipids (TG, TC)), and fecal bile acids were determined. No significant differences were found in body weight gain or FER after whole egg supplementation in both the normal and high-cholesterol diet fed groups. In the normal-diet fed mice, HDL-C increased significantly in the 2 and 10% whole-egg powder groups. In the high-cholesterol diet fed mice, administering 10% egg powder increased the atherogenic index compared to the control. Furthermore, administration of whole egg powder increased fecal bile acids dose dependently (p<0.05). These results indicate that administering 2% hen whole egg powder did not affect blood lipid profiles and was more beneficial for health by increasing HDL-C and aiding in the excretion of cholesterol by fecal bile acids than those in the control.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.1
• /
• pp.19-26
• /
• 2017

Surface air temperature ($T_{air}$) is a key variable for the meteorology and climatology, and is a fundamental factor of the terrestrial ecosystem functions. Satellite remote sensing from the Moderate Resolution Imaging Spectroradiometer (MODIS) provides an opportunity to monitor the $T_{air}$. However, the several problems such as frequent cloud cover and mountainous region can result in substantial retrieval error and signal loss in MODIS $T_{air}$. In this study, satellite-based $T_{air}$ was estimated under both clear and cloudy sky conditions in Gangwon Province using Aqua MODIS07 temperature profile product (MYD07_L2) and GCOM-W1 Advanced Microwave Scanning Radiometer 2 (AMSR2) brightness temperature ($T_b$) at 37 GHz frequency, and was compared with the measurements from the Automated Mountain Meteorology Stations (AMOS). The application of ambient temperature lapse rate was performed to improve the retrieval accuracy in mountainous region, which showed the improvement of estimation accuracy approximately 4% of RMSE. A simple pixel-wise regression method combining synergetic information from MYD07_L2 $T_{air}$ and AMSR2 $T_b$ was applied to estimate surface $T_{air}$ for all sky conditions. The $T_{air}$ retrievals showed favorable agreement in comparison with AMOS data (r=0.80, RMSE=7.9K), though the underestimation was appeared in winter season. Substantial $T_{air}$ retrievals were estimated 61.4% (n=2,657) for cloudy sky conditions. The results presented in this study indicate that the satellite remote sensing can produce the surface $T_{air}$ at the complex mountainous region for all sky conditions.