• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2002년도 학술발표논문집
• /
• pp.110-114
• /
• 2002

단동형 비닐하우스는 연동형 비닐하우스에 비해 생력화 및 자동화가 미흡한 재배시설이다. 그러나 전국 시설면적 52,189 ha 중 90%이상이 단동형 비닐하우스로서 대부분 초기투자 부담이 적고 파이프를 이용하여 손쉽게 설치할 수 있는 단동형 비닐하우스를 선호하고 있는 실정이다. 단동형 비닐하우스는 각 지역의 특성에 적합한 고유형 시설로 발전하여 왔기 때문에 폭이 5-6m, 높이가 2-3.5m 정도인 대형 터널형태와 폭이 l0m 이상인 광폭형태 등 규격이 다양하게 설치되어있다. (중략)

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2002년도 학술발표논문집
• /
• pp.115-119
• /
• 2002

석유를 이용한 시설원예 난방이 90%를 넘고 있으며, 최근 유가의 불안정으로 시설원예 난방비 비중이 30%를 이상을 차지하고 있어 대체에너지를 이용한 난방비 절감기술이 절실하다. 현재 시설원예 면적은 약 52,189ha(채소, 화훼포함)이며, 이중 난방면적은 13,621ha로 전체 면적의 26%가 난발비의 부담을 안고 시설재배를 하고 있다. 이에 단위 열량당 연료비가 비교적 저렴한 코크스를 이용하는 난방기 중 온풍기를 개발하여 시설원예 난방비를 절감코자 본 연구를 수행하였다. (중략)

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.29-34
• /
• 2002

The microphase adsorption - spectral correction (MPASC) technique was described and applied to study the interaction of fluorescein isothiocyanate (FITC) with cetyl trimethylammonium bromide (CTAB). The synergism mechanism of micelle was analyzed and discussed. The aggregation of FITC on CTAB obeys the Langmuir monolayer adsorption. Results showed that the monomer and micellar aggregate is $FITC-CTAB_3$ and $(FITC-CTAB_3)_{29}$, respectively at pH 9.62. The adsorption constant of the CTAB-FITC aggregate was determined to be $2.10{\times}10^5$. Interestingly, it was observed for the addition of an anionic surfactant to desorb FITC from its CTAB aggregate and this has been applied to the quantitative determination of trace amounts of anionic detergent (AD) in sewage.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.342-349
• /
• 2018

Polystyrene (PS) was coated on carbonyl iron (CI) particles via dispersion polymerization to produce core-shell structured CI/PS particles and adopted as magnetorheological (MR) material. Two MR fluids were prepared by dispersing CI/PS and CI particles in silicone oil. Their MR and tribological properties were investigated using a rheometer and a reciprocating friction and wear tester, respectively. Experimental data showed that tribological properties of MR fluid based on CI/PS particles are significantly enhanced compared to those of CI based MR fluid. Sedimentation problem of CI/PS MR fluid was also expected to be improved due to relatively lower density of CI/PS particles.

• Advances in aircraft and spacecraft science
• /
• 제6권3호
• /
• pp.257-272
• /
• 2019

Numerical study of the flutter of a plate on a viscoelastic foundation is carried out in the paper. Critical velocity of the flutter of a plate on an elastic and viscoelastic foundation is determined. The mathematical model for the investigation of viscoelastic plates is based on the Marguerre's theory applied to the study of the problems of strength, rigidity and stability of thin-walled structures such as aircraft wings. Aerodynamic pressure is determined in accordance with the A.A. Ilyushin's piston theory. Using the Bubnov - Galerkin method, the basic resolving systems of nonlinear integro-differential equations (IDE) are obtained. At wide ranges of geometric and physical parameters of viscoelastic plates, their influence on the flutter velocity has been studied in detail.

• Journal of Biosystems Engineering
• /
• 제28권3호
• /
• pp.225-230
• /
• 2003

This study was carried out to analyze the environmental variation of layer house at Iowa State in the USA. The analyzed seasons for this study were summer and winter. Analyzing factors are inside temperature and relative humidity, carbon dioxide concentration, ammonia concentration and emission. All factors were collected every 30 second from each house with portable monitoring units. In this study, two types of laying hen houses were monitored at the same season. One was a manure belt house, the other was a high-rise house. In order to estimate the ventilation rates of the laying hen houses, carbon dioxide concentration balance was used in this study. Ammonia concentrations and emission rates of the manure belt house are much lower than those of the high rise house. Daily mean ammonia concentrations in the manure belt house and high-rise house ranged from 3 to 7 ppm and 5 to 34 ppm, respectively. The daily ammonia emission rates averaged 0.68g/h$\cdot$500kg and 0.73g/h$\cdot$500kg for the manure belt house and 0.93g/h$\cdot$500kg and 2.89g/h$\cdot$500kg for the high-rise house in summertime and wintertime, respectively. Summertime is associated with much higher ammonia emission rates than wintertime because of much higher ventilation rates and ambient air temperature, even though the concentrations may be lower.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.287-294
• /
• 2000

Calculation of the flexural rigidity value (EI) is indispensable for prescription of deflection characteristics of crop stalks in harvesting□Conventionally□EI has been determined by either average EI of the whole stalk or average EI of each stems divided into node through the calculation method of cantilever with homogeneous section□However□deflection characteristics of crop stalks caused by mechanical operation such as combine harvester were not exactly presumed by these conventional EI through the experiment by authors. Further, actual EI of a stalk changes in company with a change of moisture contents as time passes during the experiment. Finally, efficient calculation method for determining EI is needed in order to improve these problems. In this study, mechanical model based on actual structure of the crop stalk with variety sectional area was proposed. This mechanical model is calculated by the theory of cantilever with continuous stages. Therefore, improvement of both calculating accuracy on EI and efficiency of measuring system was tried. At first, this calculation method was applied to piano wire of which EI was recognized in advance. As a result, EI calculated from this new method coincided approximately with piano wire's EI. Next, applying to crop stalks as same as piano wire, relationship between loads acting on crop stalks and deflection values calculated by EI using this new calculation method was exactly presumed in comparison with conventional method. Further, measuring time of deflection test was greatly reduced. Finally, new calculation method of EI will be available for estimating mechanical characteristics of so many kinds of crop stalks in harvesting operation. Further, in this study, new deflection test using image-processing apparatus by computer will be introduced.

• 농업과학연구
• /
• 제10권1호
• /
• pp.90-96
• /
• 1983

양송이 합성배지(合成培地)의 야외발효과정(野外醱酵過程)을 성력기계화(省力機械化)하기 위한 방법(方法)으로서 분쇄(粉碎)볏짚에 영양원(營養源)을 첨가(添加)하여 단기간(短期間) 발효(醱酵)시킨 다음 후발효(後醱酵)하는 시험(試驗)을 실시(實施)한 결과는 마음과 같다. 1. 분쇄(粉碎)볏짚의 단기발효배지(短期醱酵培地)는 Ammonia 태질소(態窒素)의 잔류량(殘留量)은 낮으나 전실소함량(全室素含量)이 관행배지보다 낮았다. 2. 미생물(微生物)은 분쇄볏짚이 관행배지보다 밀도(密度)가 높아서 발효기간(醱酵期間)의 단축(短縮)이 가능함을 보였다. 3. 양송이 자실체수량(字實體收量)은 관행배지보다 낮은 경향이었으나 영양원(營養源)의 첨가(添加)를 개선(改善)하므로서 향상(向上)시킬수 있는 가능성이 보였다. 4. 단기발효배지(短期醱酵培地)의 제조시(製造時) 수분(水分) 및 영양원(營養源)의 조절(調節)이 곤란하였고 이를 위해서 최소(最少) 5일간(日間)의 퇴적(堆積) 및 뒤집기작업(作業)이 필요하였다. 5. 배지재료(培地材料)로서는 일본형품종(日本型品種)의 볏짚이나 통일계품종(統一系品種) 모두 사용(使用)할수있었고 영양원(營養源)은 들깻묵과 미강을 혼합(混合) 첨가(添加)하는 것이 가장 좋았다.

• 농업과학연구
• /
• 제37권2호
• /
• pp.309-314
• /
• 2010

Bale is an operation of collecting livestock feed materials from field crop residue, and mechanization demand on the operation has been increased. Bailers imported from foreign countries such as Japan and European countries have been used, but those models showed improper performance in Korean situations. In recent years, a steel-roller type round baler attachable to medium size tractors(40 to 60 HP) for effective bale operation in Korea was developed. This study was conducted to evaluate field performance of the baler. For proper baling operation, engine speed was greater than 1,800rpm, average traction force and PTO torque were about 4kN and in a range of 380-671Nm, and maximum values were about 7kN and 3,000Nm, respectively. Performance evaluation tests for sudan grass, rice straw, and blue barley showed that field capacity was 0.59ha/h for blue barley and 0.99ha/h for sudan grass and rice straw. Bale weight, diameter, width, and bulk density were in ranges of 176.1~418.4kg, 1.07~1.12m, 1.02~1.04m, and 175.3~454.1kg/$m^3$. Noise sound level during the baling operation was 4dB greater than idle operation condition, which was considered to be ignorant.

• Journal of Biosystems Engineering
• /
• 제29권1호
• /
• pp.29-36
• /
• 2004

The geometric characteristics of the Altari radish were measured for the purpose of mechanization of the kimchi processing. In this study, geometric characteristics such as the sectional area and volume of the radishes(pyeong-gang and sa-chul) were calculated using the image processing method, and physical properties such as the compressive strength, the cutting force of the radish and the torsional moment of the radish leaf-stems were measured by using a universal testing machine. In case of the radish(pyeong-gang), the weight was ranged 215.0∼465.0 g, the length of the radishes(body) was 86.3∼129.2 mm, the diameters were 43.3∼58.1 mm, and the length of the leaves was 261.3-368.2 mm. And the vertical compressive strengths were ranged 83.8∼171.7 N/$\textrm{cm}^2$, the horizontal compressive strengths were 113.0∼176.3 N/$\textrm{cm}^2$, the shearing forces were 86.0∼114.6 N, and the surface hardness was ranged 51.1∼52.1 N/$\textrm{cm}^2$. In case of the radish(sa-chul), the weight was ranged 203.5∼412.2 g, the length of the bodies was 67.5∼127.0 mm, the diameters were 22.3∼59.8 mm and the length of the leaves was 245.6∼312.6 mm respectively. And the vertical compressive strengths were ranged 91.3∼168.3 N/mm, the horizontal compressive strengths were 132.6∼186.9 N/$\textrm{cm}^2$, the shearing forces were 89.4∼116.5 N, and the surface hardness was ranged 52.4∼67.8 N/$\textrm{cm}^2$, respectively.