• 대한안전경영과학회지
• /
• 제11권2호
• /
• pp.87-94
• /
• 2009

In the fire there are fusion signs and damage by fire, and insulation aging and carbonization of the electric wiring in the ignition spot because of special characteristic of the appliance in the electricity fire. Because of the physical factor applied in the damage of fire, the decision of ignition spot by eye investigation is insufficient. In this paper, the cause of electricity fire is researched. The focus is on the operation state of operated MCCB(Molded Case Circuit Breaker) at the time of electricity fire. Through grasping the operation principle of MCCB and the experiment, the state of MCCB after fire suppression is discriminated. The distinction possibility on the exist of electricity fire is proposed.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.1953-1960
• /
• 2002

The viscoplasticity theory based on overstress, one of the unified state variable theories, is generalized to model zero (no influence of loading rate) and negative (flow stress decreases with loading rate) as well as positive (flow stress increases with loading rate) rate sensitivity in a consistent way. On the basis of the long-time asymptotic solution the different types of rate sensitivity are classified with respect to an augmentation function that is introduced in the evolution law fur a state variable equilibrium stress. The theory predicts normal relaxation and creep behaviors even if unusual rate sensitivity is modeled. The constitutive model fir the behavior of a modified 9Cr-1 Mo steel at various temperatures is then compared with experimental data found in the literature.

• Smart Structures and Systems
• /
• 제20권6호
• /
• pp.759-767
• /
• 2017

Wear and aging associated damage is a severe problem for safety and maintenance of engineering structures. To acquire structural operational state and provide warning about different types of damage, research on damage identification has gained increasing popularity in recent years. Among various damage identification methods, the Lamb wave-based methods have shown promising suitability and potential for damage identification of plate-type structures. In this paper, a comprehensive study was presented to elaborate four remarkable aspects regarding the Lamb wave-based damage identification method for plate-type structures, including wave velocity, signal denoising, image reconstruction, and sensor layout. Conclusions and path forward were summarized and classified serving as a starting point for research and application in this area.

• 전력전자학회논문지
• /
• 제26권4호
• /
• pp.241-248
• /
• 2021

A battery state-of-health (SOH) estimation algorithm using a machine learning-based linear regression method is proposed for estimating battery aging. The proposed algorithm analyzes the change trend of the open-circuit voltage (OCV) curve, which is a parameter related to SOH. At this time, a section with high linearity of the SOH and OCV curves is selected and used for SOH estimation. The SOH of the aged battery is estimated according to the selected interval using a machine learning-based linear regression method. The performance of the proposed battery SOH estimation algorithm is verified through experiments and simulations using battery packs for electric vehicles.

• 대한방사성의약품학회지
• /
• 제6권2호
• /
• pp.116-130
• /
• 2020

The aging society is globally one of biggest issue because it is related with various degenerative brain disease such as dementia, Parkinson's disease, Alzheimer's disease, multiple sclerosis, and cerebrovascular disease. These diseases are characterized by misfolded-protein aggregation; another pathological trait is "neuroinflammation". In physiological state, the resting microglia cells are activated and it removes abnormal synapses and cell membrane debris to maintain the homeostasis. In pathological state, however, microglia undergo morphological change form 'resting' to 'activated amoeboid phenotype' and the microglia cells are accumulated by neuronal damage, the inflammatory reactions induced nerve metamorphosis with a variety of neurotoxic factors including cytokines, chemokines, and reactive oxygen species. Thus, the activated microglia cell with various receptors (TSPO, COX, CR, P2XR, etc.) was perceived as important biomarkers for imaging the inflammatory progression. In this review, we would like to introduce the current status of the development of radiotracers that can image activated microglia.

• KDI Journal of Economic Policy
• /
• 제44권1호
• /
• pp.1-47
• /
• 2022

This paper introduces a politico-economic model with a welfare state and immigration. In this model, policies on taxes and immigration are determined through a plurality voting system. While many studies of fiscal implications of immigration argue that relaxing immigration policies can substitute for tax reforms in an aging economy, I show that the democratic voting procedure can dampen the effect of relaxing immigration policies as desired policy reforms are not always implemented by the winner of an election. This political economy results in three types of social welfare losses. First, the skill composition is not balanced at a socially efficient level because workers are motivated to maximize their wages. Second, older retirees implement excessive taxes to maximize the size of the welfare state. Third, the volume of immigration is lower than the optimal level given the incentive by young workers to regain political power in the future.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제2권2호
• /
• pp.89-97
• /
• 2014

내륙의 주전력 공급계통과 단절되어 있는 도서지역은 대부분의 전력공급을 디젤발전설비가 담당하고 있다. 디젤발전설비는 특성상 예방정비 및 유지보수를 통해 사용수명을 연장시킬 수 있으나, 계속 사용에 따른 기계설비의 노후화 및 발전 효율 감소로 인해 운영비가 증가한다. 즉, 적기에 노후 발전설비를 교체할 경우 발전소 운영비용을 줄일 수 있다. 이에 본 연구에서는 디젤발전설비의 상태를 대표할 수 있는 지표를 도출하고, 몬테카를로 시뮬레이션을 이용하여 각 지표별 민감도 분석을 수행하고자 한다. 이를 통해 디젤발전설비의 현상태를 정량적으로 나타낼 수 있는 상태점수를 정의하고 이를 바탕으로 설비 교체의 기준을 마련하고자 한다.

• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.55-64
• /
• 1995

A study was made to examine the effects of postweld heat treatment(PWHT) on the toughness and microstructures in the weld heat affected zone(HAZ) of Cu-bearing HSLA-100 steel. The Gleeble thermal/mechanical simulator was used to simulate the weld HAZ. The details between toughness and PWHT of HAZ were studied by impact test, optical microscopy(O.M.), scanning electron microscopy (SEM), transmission electron microscopy(TEM) and differential scanning calorimetry(DSC). The decrease of HAZ toughness in single thermal cycle comparing to base plate is ascribed to the coarsed-grain formed by heating to 1350.deg.C. The increase of HAZ toughness in double thermal cycle comparine to single thermal cycle is due to the fine ferrite(.alpha.) grain transformed from austenite(.gamma.)formed by heating to .alpha./.gamma. two phase region. Cu precipitated during aging for increasing the strength of base metal is dissolved during single thermal cycle to 1350.deg.C and is precipitated little on cooling and heating during subsequent weld thermal cycle. It precipitates by introducing PWHT. Thus, the decrease of toughness in triple thermal cycle of $T_{p1}$ = 1350.deg.C, $T_{p2}$ = 800.deg.C and $T_{p3}$ = 500.deg.C does not occur owing to the precipitation of Cu. The behaviors of Cu=precipitates in HAZ is similar to that in base plate. PWHT at 550.deg.C shows highest hardness and lowest toughness, whereas PWHT at 650.deg.C shows reasonable toughness, which improves the toughness of as-welded state.state.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1759-1768
• /
• 2018

The energy density, power density and ohm resistance of battery change significantly as results of battery aging, which lead to decrease in the accuracy of the equivalent model. A parameter identification method of the equivale6nt circuit model with 3 R-C branches based on the test database of battery life cycle is proposed in this paper. This database is built on the basis of experiments such as updating of available capacity, charging and discharging tests at different rates and relaxation characteristics tests. It can realize regular update and calibration of key parameters like SOH, so as to ensure the reliability of parameters identified. Taking SOH, SOC and T as independent variables, lookup table method is adopted to set initial value for the parameter matrix. Meanwhile, in order to ensure the validity of the model, the least square method based on variable forgetting factor is adopted for optimizing to complete the identification of equivalent model parameters. By comparing the simulation data with measured data for charging and discharging experiments of Li-ion battery, the effectiveness of the full life cycle database and the model are verified.

• 열처리공학회지
• /
• 제7권2호
• /
• pp.139-146
• /
• 1994

In the molten state, magnesium alloys vigousey react with oxygen in the air, is protected from oxidation and burning by the addition of $SF_6$ to $CO_2$ atmosphere over the melt. The mechanical properties and metallographic examinatin have made of Mg-Al alloys containing 3, 6, 9% in the solution treated state and precipitated state, comparing mechanical properties obtained during unidirectional solidification with me chanical properties obtained during conventional casting. For a given solution treatment, a higher aluminum contents produce more or less fine grains in conventional casting. For a given artifical aging treatment, a higher aluminum contents produces much precitates at the grain boundary as well as within the grain in unidirectional solidification. As a result of this experiment, for a given heat treatment, the higher is aluminum contents the higher is the ultimate tensile strength, yield strength, hardness while the lower the elongation. Also the mechanical properties of unidirectional solidification is larger than that of conventional casting.