• 농업과학연구
• /
• 제43권1호
• /
• pp.144-151
• /
• 2016

With an aging population in rural areas, farm owners in South Korea are also aging. In particular, this phenomenon leads to the lack of human resources in rural areas and agriculture, worsening the deterioration of the rural economy. This study aimed, firstly, to analyze the criticality of the lack of human resources and high production cost issues for farmers, before using the farm as cooperative nursery of rice seedlings. Secondly, the study analyzed farmer satisfaction after using the farm cooperative. Analysis results are as follows. The motives of the research subjects for using the co-nursery were the aging of the farming population, the expected reduction of production costs, and farmers' failure in raising seedlings. Importance-performance analysis measured the importance for the farms for cooperative raising of rice seedling at 3.49 and the performance for the farms at 3.41, with a difference of 0.07 between them. The four importance-performance matrix areas, used were as follows: concentrated efforts required (Quadrant I: concentrate here), continuous maintenance (Quadrant II: keep up the good work), gradual improvement (Quadrant III: low priority), and avoiding excessive efforts (Quadrant IV: possible overkill). Based on the results, it was concluded that improvements and efforts would be necessary for each of these areas. And, there is a need to improve services through the initiation of farmer use of this rice co-nursery.

• 열처리공학회지
• /
• 제13권1호
• /
• pp.1-9
• /
• 2000

The microstructural characteristics and low temperature tensile properties between $25^{\circ}C$ and $-196^{\circ}C$ for as-welded and age hardened specimen by using Al 5083-H321 for base metal, 5083-5356 and 5083-4043 weldments have been investigated. The hardness of 5083-5356 weldment decreases with aging treatment, whereas the weld region of 5083-4043 weldment shows remarkable increase in hardness after aging due to the precipitation of fine Si particle at the grain boundaries and interiors. Low temperature tensile properties of 5083 AI base metal, 5083-5356 and 5083-4043 weldments appear to be the increment of tensile strengths and elongations at the room temperature and $-196^{\circ}C$, while the decrement of tensile properties around $-50^{\circ}C$ is shown. Through the observation of fine serration to fracture in the stress-strain curve and tensile fractography, the increment of localized deformation leading to promote the neck initiation and the increment of the dimple size cause to decrease in tensile strengths and elongations around $-50^{\circ}C$. For the tensile specimen of the 5083 base metal, 5083-5356 and 5083-4043 weldments, the reason to increase in elongation after solution and aging treatment is the diminishment of fine pit, the resolution of Mg into the matrix and the spheridization of the eutectic Si.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권5호
• /
• pp.660-669
• /
• 1998

In this paper the Hardness and Electro-chemical corrosion of the Nimonic 80A superalloy were studied. It aging heat treatments was carried out at $650^{\circ}C$, $700^{\circ}C$, $750^{\circ}C$,$800^{\circ}C$ and $850^{\circ}C$ with different time of 20min , 30min 1hour, 2hours, 4hours, and 16hours additionally 64hours and 128hours at $650^{\circ}C$. The obtained results were as follows; 1. As aging temperature increased the time for the maximum hardness was reduced from 128hours at $650^{\circ}C$ to 30min at $850^{\circ}C$ whereas the highest hardness was reduced from Hv 381 at $650^{\circ}C$ to Hv 321 at $850^{\circ}C$. 2. In the Electro-chemical corrosion test as a function of aging heat treatment time and tem-perature the corrosion potential was reversely proportional to Hardness which indicated the effects of ${\gamma}/{\gamma}'$ coherency of base material and precipitate. 3. Initiation point of the pitting was observed at grain boundary twin boundary and near${\gamma}'$ pre-cipitates. The results of composition analysis by EDS at this point indicated that sulphur originat-ed from 1N $H_2SO_4$ solution was found in depletion at the grain boundaries and the pit which arouse in the near precipitates were lack of Al Ti and Ni which are the main element of ${\gamma}'$ The depletion of such element was cause breakdown of passive film.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.519-527
• /
• 1997

AISI 316 steel has been used extensively for heater and boiler tube of the structural plants such as power, chemical and petroleum plants under severe operating conditions. Usually, material degradation due to microcrack or precipitation of carbides and segregation of impurity elements, is occured by damage accumulated for long-term service at high temperature in this material. In this study, the effect of aging time on fracture toughness was investigated to evaluate the measurement of material degradation. The elastic-plastic fracture toughness behaviour of AISI 316 steel pipe aged at $550^{\circ}C$for 1h-10000h (the aged material) was characterized using the single specimen J-R curve technique and eletric potential drop method at normal loading rate(load-line displacement speed of 0.2mm/min) in room temperature and air environment. The fracture toughness data from above experiments is compared with the $J_{in}$ obtained from predicted values of crack initiation point using potential drop method.

• 한국식품영양과학회지
• /
• 제23권5호
• /
• pp.867-878
• /
• 1994

A general overview of the lipid peroxidation and its nutritional significance are presented ,with emphasis on the reaction mechaisms, peroxidized products, further interaction and nutritional/biological deterioration in a series of oxidative process. Overall mechanism with various factors and elements for initiation , propagation and termination of free radical reaction is reviewed and the primary /secondary products of peroxidized lipids are defined. Since these products are potentially reactive substances that can cause deterioration of proteins /amino acids and vitamins (carotene, tocopherols and ascorbic acid etc), mechanism and actual damages of their deterioration in some foods and biological models are outlined. Especially , chemical changes caused by interaction of peroxidized products (related hydroperoxides, radicals and malonaldehye etc) and protein are emphasized here. And also, the detailed mechanisms on radical scavenging of the these vitamins which are the most prominent natural antioxidants are presented . Additionally , the possible roles of peroxidicaed lipids and their secondary products in the process of aging an carcinogenesis are briefly discussed . However, it is important to not that more detailed and integrated studies on the reaction kinetics, energetics of peroxidation, their decomposed products , biochemical interaction potential damaging/aging / carcinogenic effects, protection from their oxidative spoilage and novel antioxidants in food and heterogeneous biological systems will be essential in order to assessing the implication of lipid peroxidation to human nutrition and health.

• 대한금속재료학회지
• /
• 제49권3호
• /
• pp.203-210
• /
• 2011

Bake hardening steels have to resist strain aging to prevent the yield strength increment and stretcher strain during press process and to enhance the bake hardenability during baking process after painting. The bake hardening steels need to control the solute carbon and the solute nitrogen to improve the bake hardenability. Ti and/or Nb alloying for nitride and carbide precipitation and low carbon content below 0.003% are used to solve strain aging and formability problem for automotive materials. However, in the present study, the effect of micro-precipitation of copper sulfide on the bake hardenability and fatigue properties of extremely low carbon steel has been investigated. The bake hardenability of Cu-alloyed bake hardening (Cu-BH) steel was slightly higher (5 MPa) than that of Nb-alloyed bake hardening (Nb-BH) steel, but the fatigue limit of Cu-BH steel was far higher (45 MPa) than that of Nb-BH steel. All samples showed the ductile fracture behavior and some samples revealed distinct fatigue stages, such as crack initiation, stable crack growth and unstable crack growth.

• 마이크로전자및패키징학회지
• /
• 제18권2호
• /
• pp.49-55
• /
• 2011

전자기기에서의 고장 중 대부분은 작동 중 발생하는 열과 충격에 기인한다. 이 열과 충격은 PCB(Printed Board) 부품의 접합부 계면에 균열을 야기 시키고, 이 균열은 금속간 화합물(Intermetallic Compound: IMC)의 형성과 밀접한 관계를 가진다. 본 연구에서는 Sn-Ag-Cu계의 Ag함량을 변화한 Sn-1.0Ag-0.5Cu와 Sn-1.2Ag-0.5Cu 및 Sn-3.0Ag-0.5Cu의 3가지 조성의 솔더로 접합한 소재를 대상으로 1000시간 까지 등온시효(Isothermal Aging) 하였다. 등온시효 동 안 솔더(Solder)의 계면에 발생하는 IMC(Intermetallic Compound) 성장이 관찰되었으며, solder 접합부의 기계적 특성은 굽힘충격 시험법을 이용하여 평가되었다. 그 결과 시효처리 전에는 Ag 함량이 낮은 solder의 굽힘충격 특성이 우수하게 나타났으나, 시효처리 후에는 반대의 결과를 나타내었다. 이 결과는 IMC layer 주변에 생성된 미세한 $Ag_3Sn$ 및 조대한 $Cu_6Sn_5$와 관련되어, 미세한 $Ag_3Sn$이 충격을 완화한 것으로 나타나 이에 따라 굽힘충격 특성에 차이가 나타남을 알 수 있었다.

• 전기화학회지
• /
• 제11권3호
• /
• pp.184-189
• /
• 2008

Inhibitive effects of chromate, phosphate, sulfate, and borate on chloride pitting corrosion of Al have been investigated using cyclic voltammetry. During the anodic oxide growth, the critical concentration of chloride for pit initiation decreased in the order: chromate > phosphate > sulfate > borate, and the maximum pitting current density increases in the reverse order: chromate < phosphate < sulfate < borate. The decreasing pitting current density was observed in the successive polarization cycles, which was attributed to the aging of Al oxides and field relaxation at oxide/solution interface.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.805-811
• /
• 2011

Aircraft MLG and wing structures have been recognized as fatigue critical structures and exposed to the risk of fatigue crack initiation and propagation. Furthermore, these structures are frequently subjected to serious dynamic loading condition during a Hard Landing which may lead to their failure. Especially, structural integrity of MLG and wing components is decreased as the flight time increased because of the fatigue damage accumulated on the aircraft. In this study, the effects of Hard Landing on the MLG and wing components of aging aircraft were evaluated by using numerical approach. To achieve the aim, a finite element model has been developed and simulations were conducted by varying the landing conditions. As a result, it was revealed that the high stress concentration phenomenon was occurred at the lower Side Brace of MLG. Thereby, the intensified inspection for the lower Side Brace should be considered to prevent unexpected aircraft mishap.

• Toxicological Research
• /
• 제17권
• /
• pp.17-24
• /
• 2001

Risk assessment is useful tool making good decisions on the risks of certain hazardous com-pound and suggests safe margin through scientific process using toxicological data, statistical tool, exposure value and relevant variants. The goal of risk management is to protect the public health from hazardous compound based on result of risk assessment having reality. For the suggestion of exact man-aging information, risk assessment must be designed to represent a "plausible estimate" of the exposure to the individuals and to minimize uncertainty. Risk assessment methodology and knowledge are expected to change more rapidly than before and up-to-date methodology should be applied in regulatory aspects through the Agency. For the useful application of risk assessment, the communication between the risk assessor and the risk manager is needed before the initiation of the risk assessment and upon its completion. Generally, the risk assessment itself as a practical tool in the regulatory decision making process would be regarded with social economic impact.ic impact.