• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.933-937
• /
• 2009

This paper proposes a dynamic timeout scheduling for energy efficient and accurate aggregation by analyzing the single hop delay in wireless sensor networks based on IEEE 802.15.4. The proposed scheme dynamically configures the timeout value depending on both the number of nodes sharing a channel and the type of wireless media, with considering the results of delay analysis of the single hop delay. The timeout of proposed scheme is much smaller than the maximum single hop delay which is used as the timeout of traditional data aggregation schemes. Therefore the proposed scheme considerably reduces the energy consumption of idle monitoring for waiting messages. Also, the proposed scheme maintains the data accuracy by guaranteeing the reception ratio required by the sensor network applications. Extensive simulation has revealed that proposed scheme enhances energy consumption by 30% with maintaining data accuracy, as compared with the TAG data aggregation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.620-629
• /
• 2012

This paper proposes packet aggregation scheme for considering energy consumption of mobile devices on guaranteeing quality of voice. To our purpose, we analyze VoIP service on wireless multi-hop channel in terms of delay, packet loss and energy consumption when packet aggregation scheme is applied to VoIP service. Moreover, we induce a cost function with considering of tradeoff relation between quality of voice and energy consumption.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.67-72
• /
• 2020

Recycling processes of spent copper wires cosisnt of several steps of cutting and chopping processes for peeling covering materials followed by gravity separation processes, where copper is recovered. Because copper thin wires could be lost during further recycling processes, the wire may need to be further treated. In the present study, the copper thin wire was treated with ball milling to prevent the loss. Since the aggregation of the copper wire could be formed by bending and entangling the copper wire each other, the degree of flexion of the copper wire was measured after ball milling. When the 0.5 cm and 3 cm copper wires were used, the 0.5 cm copper wire was not bent and the 3 cm copper wires were aggregated regardless of the ball addition. When the 1 cm and 2 cm copper wires were used, the degree of flexion was remarkable when the balls were added. In the tests using 2 cm copper wires, the aggregation ratio of the copper wire gradually increased with the amount of the 20 mm alumina ball, and when 200 ml of 30 mm alumina ball was used, the aggregation ratio increased to 89.29 %, but after increasing the ball amount further, the aggregation ratio decreased. Thus, it is expected that the loss of the copper wire could be reducedif when the copper thin wire is treated with ball milling by the aggregation of copper thin wires.

• Journal of Sensor Science and Technology
• /
• v.15 no.5
• /
• pp.303-308
• /
• 2006

Aggregation-induced emissions of polymetalloles have been investigated since they are very attractive in their possible optoelectronic applications such as P-LED's and Sensors. Size of nanoparticulates was measured by using scanning electron micrograph and was about 200-300 nm. Phenylmethylpolysilane (PMPS) and polymetalloles emit the light at 360 nm and 520 nm, respectively. However, the aggregates of polymetallole containing PMPS exhibit an enhanced emission band at 520 nm, indicating that the energy transfer occurs from PMPS to polymetalloles in aggregates. Emission intensity of PMPS/polymetallole nanoparticulates at 520 nm increases depending on the aliquot of PMPS.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.3
• /
• pp.206-210
• /
• 2009

In this paper, we propose a new routing scheme based on multi-path routing which provides uniform energy consumption for all nodes. This scheme adds a new type of root node for constructing multi-path. The sink node delegates some partial roles to these root nodes. Such root nodes carry out path establishment independently. As a result, each nodes consume energy more uniformly and the network life-time will be extended. Through simulation, we confirmed that energy consumption of the whole network is scattered and the network life-time is extended. Moreover, we show that the proposed routing scheme improves the performance of network compared to previous routing strategies as the number of source nodes increases.

• Journal of Powder Materials
• /
• v.20 no.6
• /
• pp.479-486
• /
• 2013

In the present work, physicochemical treatments were introduced for de-aggregation and stable dispersion of detonation nanodiamonds (DND) in polar solvents. The DNDs in water exhibited a particle size of 138 nm and high dispersion stability without particular treatment. However, the DNDs in ethanol were severely aggregated to several micrometers in size and showed poor dispersion stability with time. To break down aggregates of DNDs and enhance the dispersion stability of them in ethanol, mechanical force and chemical surfactant were introduced as functions of zirconia ball size, kind of surfactant and amount of surfactant added. From the analyses of average particle size and Turbiscan results, it was suggested that the size of DNDs in ethanol can be reduced by only mechanical force; however, the DNDs were re-aggregated due to high surface activity. The long-term dispersion stability can be achieved by applying mechanical force to break down the aggregates of DNDs and by preventing re-aggregation of them using proper surfactant.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.795-799
• /
• 2007

The bulk properties of poly(γ-benzyl-L-glutamate)-poly(ethylene glycol), PBLG-PEO, diblock copolymer were investigated. The helical transition from 7/2 to 13/5 for pure PBLG was at 120 oC while those of GE-1 and GE-2, which contain flexible PEO block 40 wt% and 60 wt% respectively, were shown at 135℃ on DSC experiments. FT-IR and XRD experiments were shown that the diblock copolymers maintained their α-helical structure in the temperature range between 25℃ and 175℃. Increasing relative size of coil part resulted in the increase of intermolecular packing distances. Due to well-maintained helical structure, lyotropic LC phases were observed for the PBLG-PEO block copolymer by the polarized optical microscope (POM). Especially, GE-3 copolymer, which has 12.5 wt% PEO contents, showed the smectic C phase. The competition of favorable aggregation energy between rod-rod and coil-coil, and unfavorable aggregation energy of rod-coil give rise to change the supramolecular structure in mixed solvent.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3298-3313
• /
• 2021

The objective of this study is to estimate the occurrence probabilities of severe accident phenomena based on a fuzzy elicitation technique. Normally, it is difficult to determine these probabilities due to the lack of information on severe accident progression and the highly uncertain values currently in use. In this case, fuzzy set theory (FST) can be best exploited. First, questions were devised for expert elicitation on technical issues of severe accident phenomena. To deal with ambiguities and the imprecision of previously developed (reference) probabilities, fuzzy aggregation methods based on FST were employed to derive the occurrence probabilities of severe accidents via four phases: 1) choosing experts, 2) quantifying weighting factors for the experts, 3) aggregating the experts' opinions, and 4) defuzzifying the fuzzy numbers. In this way, this study obtained expert elicitation results in the form of updated occurrence probabilities of severe accident phenomena in the OPR-1000 plant, after which the differences between the reference probabilities and the newly acquired probabilities using fuzzy aggregation were compared, with the advantages of the fuzzy technique over other approaches explained. Lastly, the impact of applying the updated severe accident probabilities on containment integrity was quantitatively investigated in a Level 2 PSA model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.946-954
• /
• 2016

Energy industry is undergoing a paradigm shift in customer participation in the smartgrid. Customers traditionally consume electrical power. But nowadays not only do they generate electricity from private distributed generations, they can participate in demand response programs with their negawatt power which means a theoretical unit of power representing an amount of energy saved. Therefore development of decision-making criteria for electric load aggregation becomes a greater consideration as an amount of energy saved from demand response resources increases. This paper proposes load aggregators' decision-making criteria in the industrial sector where it made up the largest portion in demand response portfolio in order to assure reliability performance for demand response resources.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11A
• /
• pp.903-911
• /
• 2011

In this paper we proposed an energy adaptive data aggregation and transmission mechanism to solve the problem of energy limitation in wireless sensor networks (WSNs). Hierarchical structure methods are wildly used in WSNs to improve the energy efficiency. LEACH and TEEN protocols are the typical techniques. In these methods, all nodes, including nodes who have sensed data to transmit and nodes who haven't, are set frame timeslots in every round. MNs (member nodes) without sensed data keep active all the time, too. These strategies caused energy waste. Furthermore, if data collection in MNs is same to the previous transmission, it increases energy consumption. Most hierarchical structure protocols are developed based on LEACH. To solve the above problems, this paper proposed a method in which only MNs with sensed data can obtain allocated frame to transmit data. Moreover, if the MNs have same sensed data with previous, MNs turn to sleep mode. By this way redundant data transmission is avoided and aggregation in CH is lightened, too.