• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.882-887
• /
• 2004

The new magnetic porcelain materials have been studied by mixing magnetic St-ferrite powders with traditional porcelain materials before forming process. For the maintenance of magnetic characteristics after glaze firing process, the Sr-ferrite grains with the size of 1∼2 ${\mu}{\textrm}{m}$ were agglomerated as the isotropic granules with the size of 0.5∼2 mm. The high characteristics of magnetic porcelain materials were achieved at the following conditions; isotropic Sr-ferrite granules of 30 wt%, granule size of 1.4∼2 mm, and glaze firing temperature of $1250^{\circ}C$ in air The magnetic porcelain materials indicated the high magnetic properties, such as the remanent flux density of 240 G, the intrinsic coercivity of 3910 Oe, and the surface flux density of 178 G. The extraction properties of the magnetic tea cups were high compared to that of the traditional tea cups.

• Archives of Pharmacal Research
• /
• 제18권5호
• /
• pp.314-319
• /
• 1995

Antacid granules were prepared by agglomeration and powder method in high speed agitation type granulator. The copmositions of the test antacids were sodium bicarbonate nad magnesium carbonate nad a coating material was powder of polyvinylacetal diethyl-aminocacetate (AEA) and an additive material was talc powder. The dissolution characteristics of base from the antacid granules were investigated to evaluate neutralization capacity of hydrochloric profile of base and neutralization behavior, the following results were obtained : The prepared granules showed a pH-dependent dissolution pattern of a base. The dissolution profile of a base was varied with addition of talc powder as well as coating amount of AEA. The relationship between the ratio of dissolution retarded time for 20% and 10% AEA. The relationship between the ratio of dissolution retarded time for 20% AEA coated granules $\theta_{20}/\theta_{10}$ and the diameter reduction of the granules was explained by the rate process of neutralization of hydrochloric acid.

• 한국융합학회논문지
• /
• 제12권1호
• /
• pp.185-191
• /
• 2021

과립 분말 야금법은 기존 분말 야금법보다 치밀도가 높은 소결 부품을 얻을 수 있는 제조 기술이다. 하지만 추가 과립화 공정에 따른 생산 비용 증가가 상당하다는 단점이 있다. 과립 분말 야금법의 생산성 향상을 위해서는 과립 분말 제조 시 높은 회수율이 보장되어야 한다. 본 논문에서는 분체 동역학 전산 해석법인 이산요소법을 이용하여 과립 분말의 수율에 영향을 미치는 과립화 공정의 특성에 대해 살펴보았다. 분무 과립 공정 중 과립화 분말의 비산, 충돌 및 소착 현상을 시뮬레이션함으로써 분무 건조기의 운전 조건에 따른 과립화 분말의 파손 및 회수 가능 여부를 예측하였다. 본 논문의 가상 공정 시뮬레이션 융합 연구 결과는 실제 금속 분말의 분무 과립화 공정의 생산성 향상에 이바지할 것으로 기대한다.