• International Journal of Contents
• /
• v.4 no.4
• /
• pp.7-11
• /
• 2008

This paper embodies the agent based cinder monitoring system which supports PDA{Personal Digital Assistant). Monitoring system automatically manages data by using data managing agents such as a state managing agent, a location managing agent, a badness managing agent, a circumstances managing agent, etc, and uses a massive data processing agent to manage massive data. The development of agent based data monitoring system for the stable cinder reuse will be an epoch-making method to develop the process mechanized or manual-labored that widely spreads into the real-time automated process.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.3
• /
• pp.125-134
• /
• 2014

This paper proposes a multi-agent message transport architecture to support application areas which need fast message communications for close collaboration among agents. In the FIPA(Foundation of Intelligent Physical Agents) agent platform, all message transfer services among agents are in charge of a conceptual entity named ACC(Agent Communication Channel). In our multi-agent message transport architecture, the ACC is represented as a set of system agents named MTSA(Message Transfer Service Agent). The MTSA enables close collaboration among agents by supporting asynchronous communication, by using Reactor pattern to handle agent input messages efficiently, and by selecting optimal message transfer protocols according to the relative positional relationships of sender agents and receiver agents. The multi-agent framework SMAF(Small Multi-Agent Framework), which is implemented on the proposed multi-agent message transport architecture, shows better performance on message transfer among agents than JADE(Java Agent Development Environment) which is a well-known FIPA-compliant multi-agent framework. The faster the speed of message transfer of a multi-agent architecture becomes, the wider application areas the architecture can support.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.2
• /
• pp.191-197
• /
• 2001

In this study, the admixtures for agents for enduring cold weather used widely are collected and applied to cement mortar to analyze the strength development due to variation of curing temperature at early age. The test results show that anti-freezing admixture have some problems due to high chloride content, which may cause the corrosion of reinforcement embedded in concrete. However, the mortar applied by accelerator and another kind of agent for enduring cold weather produced by S company lead to delay of strength development in low temperature. Also, it is clarified that there are no significant problems for cement mortar in strength development due to low temperature if a suitable kind of agent enduring cold weather is used and cement mortar is cured for more than $7.5^{\circ}D.D$ at early age.

• International Journal of Knowledge Content Development & Technology
• /
• v.8 no.4
• /
• pp.75-98
• /
• 2018

In this study, the network analysis of researchers, institutions, and research principal agent was conducted to understand structure characteristics of international cooperation research project implemented from 1997 to 2018. The network of researchers and institutions were decentralized structure. On the other hands, the network of research principal agent was centralized structure. The Soul National University is the leading organization of international cooperation research project. In terms of research principal agent, corporation is the leading principal agent. In additions, the results of the network centroid analysis of the researchers and institutions were correlated with the research funds. As a result, it was confirmed that the network centroid of research organization was linearly related to research funds.

• Carbon letters
• /
• v.6 no.3
• /
• pp.158-165
• /
• 2005

Room temperature kinetics of degradation of nerve agent simulants and sarin, an actual nerve agent at the surface of different carbon based adsorbent materials such as active carbon grade 80 CTC, modified whetlerite containing 2.0 and 4.0 % NaOH, active carbon with 4.0 % NaOH, active carbon with 10.0 % Cu (II) ethylenediamine and active carbon with 10.0 % Cu (II) 1,1,1,5,5,5-hexafluoroacetylacetonate were studied. The used adsorbent materials were characterized for surface area and micropore volume by $N_2$ BET. For degradation studies solution of simulants of nerve agent such as dimethyl methylphosphonate (DMMP), diethyl chlorophosphate (DEClP), diethyl cyanophosphate (DECnP) and nerve agent, i.e., sarin in chloroform were prepared and used for the uniform adsorption on the adsorbent systems using their incipient volume at room temperature. Degradation kinetics was monitored by GC/FID and was found to be following pseudo first order reaction. Kinetics parameters such as rate constant and half life were calculated. Half life of degradation with modified whetlerite (MWh/NaOH) system having 4.0 % NaOH was found to be 1.5, 7.9, 1206 and 20 minutes for DECnP, DEClP, DMMP and sarin respectively. MWh/NaOH system showed maximum degradation of simulants of nerve agents and sarin to their hydrolysis products. The reaction products were characterized using NMR technique. MWh/NaOH adsorbent was also found to be active against sulphur mustard.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.711-714
• /
• 2004

A project to develop internet based collaborative engineering environments using agent technology is started to develop an agent based soft system for design and performance analysis of centrifugal pumps. This paper introduces the feasible technology needed to construct a pump design system based on software agent.

• Fashion & Textile Research Journal
• /
• v.6 no.2
• /
• pp.229-233
• /
• 2004

Andongpo, 100% Korean hemp fabric was treated with the glyoxale resin type finishing agent and/or the soluble urethane type finishing agent to determine the optimum process condition of the crease resistant finish and the crease recovery of treated sample fabrics was evaluated for the study. The treatment conditions for the study were 6 conditions, such as, A-1~A-6, in which A-1 was the condition of treatment glyoxale resin type finishing agent only and A-2~A-6 were the condition of treatment both glyoxale resin type finishing agent and soluble urethane type finishing agent. Among the 6 conditions, the crease recovery of the sample treated with A-4 condition was $148^{\circ}$(angle of recovery method) and grade 3.2(appearance method) and so, these samples showed the excellent crease recovery. From the result, 15g/l of the catalyst conc., 50g/l of the glyoxale resin type finishing agent cone., and 40g/l of the softner were the optimum treatment condition for the crease resistant finish of the andongpo.

• The Journal of Korea Robotics Society
• /
• v.2 no.4
• /
• pp.317-326
• /
• 2007

Recently, robotic automation in clinical laboratory becomes of keen interest as a fusion of bio and robotic technology. In this paper, we present a new robotic platform for clinical tests suitable for small or medium sized laboratories using mobile robots. The mobile robot called Mobile Agent is designed as transfer system of blood samples, reagents, microplates, and any instruments. Also, the developed mobile agent can perform diverse tests simultaneously based on its cooperative and distributed ability. The driving circuits for the mobile agent are embedded in the robot, and each mobile agent communicates with other agents by using Bluetooth communication. The RFID system is used to recognize patient information. Also, the magnetic hall sensor is embedded to remove and compensate the cumulated error of locomotion at the bottom of mobile agent. The proposed mobile agent can be easily used for various applications because it is designed to be compatible with general software development tools. The Mobile agents are manufactured, and feasibility of the robot and localization of the agents using magnetic hall sensor are validated by preliminary experiments.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.5
• /
• pp.119-125
• /
• 2008

In this paper, the estimation of super retarding concrete incorporating mineral admixtures at the same time including fly ash(FA), blast furnace slag(BS) are studied based on maturity method. The setting time was retarded, as super retarding agent contents increase and curing temperature decreases. In addition, apparent activation energy by Arrhenius function was ranged from $24\sim35$ KJ/mol with slightly difference along with mixture proportion. This value is smaller than existing value $30\sim50$ KJ/mol. Based on strength development estimation. it exhibited comparable relativity between prediction value and measurement value. Therefore, this study provided effective strength development prediction value with super retarding agent contents and mineral admixture combination. Strength development prediction equation provided herein is possibly valid for estimating accurate strength development of the super retarding concrete at the job site.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.393-397
• /
• 2001

This paper addresses an Intelligent Agent-based Open Architecture Cell Controller for Intelligent Manufacturing System(IMS). With an Intelligent Agent approach, the IMS will be a independent, autonomous, distributed system and achieve a adaptability to change of manufacturing environment. As the development methodology of Open Architecture Cell Controller, an object-oriented modeling technique is employed for building models associated with IMS operation, such as resource model, product model, and control model. Intelligent Agent-based Open Architecture Cell Controller consists of two kinds of dependant agents, that are the active agent and the coordinator agent. The Active agent is contributed to control components of IMS in real-time. The coordinator agent has great role in scheduling and planning of IMS. It communicates with other active agents to get information about status on system and generates the next optimal task through the making-decision logic and dispatch it to other active agent.