• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.9-15
• /
• 2018

This paper shows the principles and characteristics of the transient liquid phase (TLP) bonding technology for power modules packaging. The power module is semiconductor parts that change and manage power entering electronic devices, and demand is increasing due to the advent of the fourth industrial revolution. Higher operation temperatures and increasing current density are important for the performance of power modules. Conventional power modules using Si chip have reached the limit of theoretical performance development. In addition, their efficiency is reduced at high temperature because of the low properties of Si. Therefore, Si is changed to silicon carbide (SiC) and gallium nitride (GaN). Various methods of bonding have been studied, like Ag sintering and Sn-Au solder, to keep up with the development of chips, one of which is TLP bonding. TLP bonding has the advantages in price and junction temperature over other technologies. In this paper, TLP bonding using various materials and methods is introduced. In addition, new TLP technologies that are combined with other technologies such as metal powder mixing and ultrasonic technology are also reviewed.

• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.491-496
• /
• 2007

This study conducted a chemical experiment on the Leisegang phenomenon, which is known to be the principle of rhyolite formation, and analyzed the results. Even if the same chemical elements precipitated, the shape of Leisegang rings was different according to the condition of medium and depending on inner electrolyte and outer electrolyte. The experiment used agar, gelatin and mung-bean jelly as media. We prepared 0.01M inner electrolyte containing agar 1%, gelatin 2% and mung-bean jelly 5% and curdled the solution at room temperature for 12 hours and, as a result, we obtained viscosity optimal for experimenting on the diffusion of outer electrolyte, and Leisegang rings appeared clearly according to the characteristic of each chemical element. In $PbI_2$ with solubility product($K_{sp}$) of $7.9{\times}10^{-9}$ the intervals of Leisegang rings caused by the reaction of inner electrolyte 0.01M KI and outer electrolyte 25% $Pb(NO_3){_2}$ were narrow between 0.01cm and 0.12cmm but increased gradually, but in with of $8.3{\times}10^{-17}$ the intervals of Leisegang rings caused by the reaction of inner electrolyte 0.01M KI and outer electrolyte 25% $AgNO_3$ were between 0.7cm and 0.45cm and decreased gradually. This suggests that, in the chemical formation of Leisegang rings, the interval and size of the rings are correlated with the solubility product of the precipitates.

• Microbiology and Biotechnology Letters
• /
• v.34 no.1
• /
• pp.63-69
• /
• 2006

We isolated a bacterium which produces antifungal substances from the Lake of Saimaa soils in Fin-land. The isolated strain was identified as Bacillus sp. and shown a strong antifungal activity on plant pathogenic fungi. Bacillus sp. KMU-1011 produced maximum level of antifungal substances under incubation aerobically at $24^{\circ}C$ for 48 hours in nutrient broth containing 1.0% glucose and 1.0% polypeptone at 180 rpm and initiated pH adjusted to 6.0. Precipitate of culture broth by $30{\sim}60%$ ammonium sulfate precipitation exhibited strong antifungal activity against Botrytis cinerea KACC 40573 by dry cell weight. Chloroform extract of cultured broth also shown fungal growth inhibitory activity against C. gloeosporioides KACC 40804, D. bryoniae KACC 40669, F. oxysporum KACC 40037, F. oxysporum KACC 40052, F. oxysporum f. sp. radicis-lycopersici KACC 40537, F. oxysporum KACC 40902, M. cannonballus KACC 40940, P. cambivora KACC 40160, R. solani AG-1 KACC 40101, R. solani AG-4 KACC 40142, and S. scleotiorum KACC by agar diffusion method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.3
• /
• pp.42-51
• /
• 1981

Boron was predeposited into p (100) Si wafer at 94$0^{\circ}C$ for 60minutes to make the back surface field. High tempreature diffusion process at 1145$^{\circ}C$ for 3 hours was immediately followed without removing boron glass to obtain high surface concentration Back boron was annealed at 110$0^{\circ}C$ for 40minutes after boron glass was removed. N+ layer was formed by predepositing with POCI3 source at 90$0^{\circ}C$ for 7~15 minutes and annealed at 80$0^{\circ}C$ for 60min1es under dry Of ambient. The triple metal layers were made by evaporating Ti, Pd, Ag in that order onto front and back of diffused wafer to form the front grid and back electrode respectively. Silver was electroplated on front and back to increase the metal thickness form 1~2$\mu$m to 3~4$\mu$m and the metal electrodes are alloyed in N2 /H2 ambient at 55$0^{\circ}C$ and followed by silicon nitride antireflection film deposition process. Under artificial illumination of 100mW/$\textrm{cm}^2$ fabricated N+PP+ cells showed typically the open circuit voltage of 0.59V and short circuit current of 103 mA with fill factor of 0.80 from the whole cell area of 3.36$\textrm{cm}^2$. These numbers can be used to get the actual total area(active area) conversion efficiency of 14.4%(16.2%) which has been improved from the provious N+P cell with 11% total area efficiency by adding P+ back.

• KSBB Journal
• /
• v.21 no.1 s.96
• /
• pp.42-48
• /
• 2006

Bacillus subtilis KMU-13 was isolated from the Lillehammer forest soils at Norway and shown a strong antifungal activity on cucumber scab, Cladosporium cucumerinum KACC 40576. B. subtilis KMU-13 produced a maximum level of antifungal substance under incubation aerobically at $30^{\circ}C$, 180 rpm for 48 hours in LB broth containing 0.5% maltose and 0.5% bactopeptone and initial pH adjusted to 6.0. Butanol extract of cultured broth was confirmed inhibitory zone by plate assay and Rf 0.64 value substance by thin layer chromatography (TLC) represented high antifungal activity against C. cucumerinum KACC 40576 and also shown fungal growth inhibitory activity against Botytis cinerea KACC 40573, C. gloeosporioides KACC 40804, D. byoniae KACC 40669, F. oxysporum KACC 40037, F. oxysporum KACC 40052, F. oxysporum f. sp. radicis-lycopersici KACC 40537, F. oxysporum KACC 40902, M. cannonballus KACC 40940, P. cambivora KACC 40160, R. soiani AG-1 KACC 40101, R. solani AG-4 KACC 40142, and S. scleotiorum KACC by agar diffusion method.

• Korean Journal of Microbiology
• /
• v.42 no.2
• /
• pp.135-141
• /
• 2006

We isolated a bacterium which produces antifungal substances from the Sanktpeterburg soils at Russia. The iso-lated strain was identified as Brevibacillus sp. and shown a strong antifungal activity on plant pathogenic fungi. Brevibacillus sp. KMU-391 produced maximum level of antifungal substances under incubation aerobically at $30^{\circ}C$ for 48 hours in trypticase soybean broth containing 1.0% sucrose and 1.0% polypeptone at 180 rpm and initiated pH adjusted to 7.0. Precipitate of culture broth by $30{\sim}60%$ ammonium sulfate precipitation exhibited strong antifungal activity against Didymella bryoniae by dry cell weight. Butanol extract of cultured broth also shown fungal growth inhibitory activity against Botrytis cinerea KACC 40573, Botrytis fabae KACC 40962, Colletotrichum gloeosporioides KACC 40804, Colletotrichum orbiculare KACC 40808, Didymella bryoniae KACC 40669, Fusarium graminearum KACC 41040, Fusarium oxysporum KACC 40037, Fusarium oxysporum KACC 40052, Fusarium oxysporum f, sp. radicis-Iycopersici KACC 40537, Fusarium oxysporum KACC 40902, Monosporascus cannonballus KACC 40940, Phytophthora camvibora KACC 40160, Rhizoctonia solani AG-1(IA) KACC 40101, Rhizoctonia solani AG-4 KACC 40142, and Scleotinia scleotiorum KACC 41065 by agar diffusion method.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.17-24
• /
• 2021

Perovskite solar cells (PSCs) can be fabricated through solution process economically with variable bandgap that is controlled by composition of precursor solution. Tandem cells in which PSCs combined with silicon solar cells have potential to reach high power conversion efficiency over 30%, however, lack of long-term stability of PSCs is an obstacle to commercialization. Degradation of PSCs is mainly attributed to the mass transport of halide and metal electrode materials. In order to ensure the long-term stability, the mass transport should be inhibited. In this study, we confirmed degradation behaviors due to the mass transport in PSCs and designed buffer layers with LiF and/or SnO₂ to improve the long-term stability by suppressing the mass transport. Under high-temperature storage test at 85℃, PSCs without the buffer layers were degraded by forming PbI₂, AgI, and the delta phase of the perovskite material, while PSCs with the buffer layers showed improved stability with keeping the original phase of the perovskite. When the LiF buffer and encapsulation were applied to PSCs, superior long-term stability on 85℃-85% RH dump heat test was achieved; efficiency drop was not observed after 200 h. It was also confirmed that 90.6% of the initial efficiency was maintained after 200 hours of maximum power tracking test under AM 1.5G-1SUN illumination. Here, we have demonstrated that the buffer layer is essential to achieve long-term stability of PSCs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.10-16
• /
• 2020

Deterioration of reinforced concrete structure caused by chloride ingress is the main issue and regrading this, many studies have been investigated with both experiments and computational modelling. In addition to chloride diffusion, chloride sorption should be considered as a chloride transport mechanism in concrete structure and cracks formed in concrete structures are the main variable to evaluate the performance of the structures. In this study, after making two types of cracks width (0.1 and 0.3 mm) in reinforced concretes, chloride absorption tests were performed. Weight change and colour change using 0.1 AgNO3 solution from the samples were performed to measure chloride ingress. Image processing was also carried out to quantify range of colour change in carck face. From the result, it were confirmed that the amount of chloride absorption increases with exposure time and increasing crack width, and chlorides reached at steel depth within 1 hour. It would be possible that chloride can move through interface bewteen steel and concrete, thereby further study regarding this is required.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.299-299
• /
• 2008

초전도 응용기기 개발을 위해 필수적인 초전도 박막선재는 길이방향으로 임계전류밀도가 균일한 것이 요구되고 있다. 전체 길이에 대해 가장 임계전류 밀도가 낮은 지점에서 선재의 특성이 제한되기 때문이다. 한편 초전도 박막선재의 경우 높은 임계전류 밀도와 함께 과전류 등의 사고발생시를 고려하여 안정화재를 반드시 초전도층 위에 구성하여야 한다. 고가의 은(Ag)을 두껍게 증착할 수 없으므로 보통은 구리도금 또는 솔더링으로 안정화재를 덧댄다. 본 연구에서는 초전도 박막선재의 대전류화와 길이방향의 전류 균일성 향상, 안정화 특성 항상 등의 목적으로 초전도 박막선재간 확산 접합을 시도하였다. 초전도 박막선재 제조 후 안정화재인 은을 증착 후 따로 구리도금이나 솔더링 없이 선재 2가닥을 서로 포개어서 열처리를 하였다. 이때 선재간의 충분한 확산접합을 위하여 선재를 둥근 SUS 디스크에 감고 외부에 다시 SUS판재로 감아서 열처리 도중 압력을 가하였다. 아울러 포개는 방법도 초전도층의 위치에 따라 3 가지로 하였으며 열처리 후 임계전류를 측정하였다. 각 선재한 가닥에 대한 임계전류는 77K에서 50~60 A 정도의 임계전류를 나타내었으며 선재를 접합한 경우 90~120A의 특성을 나타내었으며 특히 초전도층이 설마주보는 형태에서 가장 높은 임계전류 특성을 나타내었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.15-18
• /
• 2003

High purity single crystalline calcium fluoride ($CaF_2$) has excellent optical transmission characteristics down to deep UV and is therefore selected as the main optical material for the next generation of lithography apparatus operating at wavelength of 157 nm. The growth of large sized $CaF_2$ single crystals with the required properties for this optical application can be achieved only by optimizing the crystal growth process by the aid of numerical simulation. This needs especially a precise calculation of the heat transport and temperature distribution in the solid and liquid $CaF_2$ under crystal growth conditions. As $CaF_2$ is considered to be semitransparent, the internal radiative heat transfer in $CaF_2$ plays an decisive role in the simulation of the heat transport. On the other hand it is very difficult to obtain quantitative experimental data for evaluating numerical models as $CaF_2$ is extremely corrosive at high temperatures. In this work we present a newly developed experimental technique to perform temperature measurements in $CaF_2$-crystal as well as in the melt under conditions of crystal growth process. These experimental results are compared to calculated temperature data, which were obtained by using different numerical models concerning the internal heat transfer in semitransparent $CaF_2$. It will be shown, that an advanced model, which was developed by the authors, gives a much better agreement with experimental data as a standard model, which was taken from the literature.