• Korean Journal of Plant Tissue Culture
• /
• v.24 no.1
• /
• pp.37-41
• /
• 1997

The in vitro regeneration and genetic transformation systems in hot pepper(Capsicum annuum L.) have not been routinely available, which has been a major limiting factor in the application of new genetic manipulations. An efficient procedure to regenerate whole pepper plants and to generate transgenic plants expressing a foreign gene was established. A relatively high frequency of plant regeneration was observed when hypocotyl and cotyledon explants were cultured on MS medium supplemented with NAA 0.1 mg/L plus zeatin 2.0 mg/L or IBA 10.0 mg/L plus BAP 1.0 mg/L. Addition of AgNO$_3$5 $\mu$M to these media improved the regeneration frequency up to 8%. For plant transformation, hypocotyl and cotyledon explants of hot pepper were precultured on shoot induction media without kanamycin added for 2 days, and then cocultured with Agrobacterium tumefaciens pDY183 for 2 days. Putative transformants were obtained from selection media containing 100 mg/L kanamycin sulfate and 500 mg/L carbenicillin. Putatively selected transformants were confirmed by amplification of selectable marker genes (ADA and NPT II) by polymerase chain reacion. Successful transcripts of ADA gene were detected by Northern blot analysis. Enzyme activity of ADA was also examined by spectrophotometric analysis, and expression of ADA gene in hot pepper suggests the potential application of ADA gene as a selectable marker in plants.

• Microbiology and Biotechnology Letters
• /
• v.4 no.4
• /
• pp.131-137
• /
• 1976

Aspergillus niger S-1 was proved to be a good hesperidinase producer which have been selected for naringinase utilization. Enzyme of this strain had good characteristics and purified relative high degree with good recovery by ammonium sulfate or aceton treatment. Results obtained were summarized as follows (1) The enzyme was most active at 60$^{\circ}C$, when the reaction was performed in the pH 4.0 for 30min. Optimum pH for enzyme activity was 5.0 and activity was retained 78％ at pH value 3.5. (2) Hesperidinase activity retained 95％ of its full activity after treatment at 60$^{\circ}C$ for 30min at pH value 4.0., 70％ at 70$^{\circ}C$ and 65％ at 80$^{\circ}C$. Most stable pH of this enzyme was showed 5.0 after treatment for 24hr at 4$^{\circ}C$ (3) Only Magnesium ion activated enzyme reaction, while other metallic ions, Cu$\^$＋＋/, Mn$\^$＋＋/, Pb$\^$＋＋/, Mo$\^$＋＋/, Ag$\^$＋＋/, Hg$\^$＋＋/ inhibited. (4) Eleven fold purification with 35％ recovery was obtained in the case of 60％ aceton treatment and 10-fold purification with 5.6％ recovery was showed with 40％ aceton comparing to the crude extract Enzyme. (5) Crude enzyme precipitated with 0.4-0.6 saturated ammonium sulfate contained 13f6 of the original enzyme activity with 48-fold increase in specific activity and enzyme has been purified 25 fold with a yield 19％ by 0.6-5.8 saturation. (6) Hesperidinase formation was noticeably increased by addition of small amount of orange-peel extraction on the wheat bran medium.

• The Journal of the Korean life insurance medical association
• /
• v.2 no.1
• /
• pp.34-36
• /
• 1985

Korea is an endemic area of chronic hepatitis in the world. Liver cirrhosis and liver cell carcinoma, presumed to be related to such chronic hepatitis, are the major causes of death in this country. The purpose of this study is disclosing the sources of chronic hepatitis in Korea establishing its histologic characteristics, disclosing the patterns of progression in chronic hepatitis, delineating its prognosis and finally speculating its etiology. The study group was composed of 183 patients with biopsy-proven acute icteric viral hepaticis, 32 patients with biopsy- proven anicteric hepatitis and 260 patients with biopsy- proven chronic hepatitis. These patients submitted to long-term follow-up by means of liver needle biopsy and/or clinicolaboratory evaluation. The period of follow-up ranged from two months to 18 years. The histological features of the initial biopsy specimens of chronic hepatitis permitted a division of the cases cases into the following five types: Type I. Persisting portal hepatitis : so called persisting hepatitis 43 Type II. Chronic inactive hepatitis with incomplete strand septal fibrosis. This type has thin fibrotic septation in addition to Type I with portal sclerosis 38 Type III. Chronic active periportal hepatitis(CAPH) : so called aggressive hepatitis, characterized by marked piecemeal necrosis. This type has been subdivided further into three groups: AB and C on the basis of histologic features. A CAPH without cirrhosis 15 B CAPH with cirrhosis 99 C CAPH with diffuse acinus type parenchymal nodules; characterized by rosette-forming micronodules 21 Type IV. Subacute hepatic necrosis; characterized by multilobular and/or bridging necrosis. 14 Type V. Persisting lobular hepatitis; characterized by spotty necrosis, which looks very similar to acute viral hepatitis. Such histologic changes should be persisted for more than six months 30 In Korea the main source of chronic hepatitis is the anicteric type. Of the chronic hepatitis observed in the hospital, Type IIIb was the most frequent in its incidence and occasionally exhibited development of hepatocellular carcinoma, but the mortality was highest in Type IIIc during the period of follow-up. Histologic characteristics of these five types suggest a spectrum of chronic hepatitis in Korea from an early and mild stage to advanced and fatal cirrhosis, which is occasionally associated with primary hepatic cell carcinoma. It seems that Type IV can be followed by flare-up of various stages of acute and chronic hepatitis with HBsAg and that many cases of liver cirrhosis prevalent in Korea occur through such an active process of Type IV. The etiology is not established, but in Korea it is mainly related to HBsAg.

• Journal of Animal Science and Technology
• /
• v.45 no.2
• /
• pp.169-182
• /
• 2003

To understand the structure and regulation of bovine ADRP (Adipocyte Differentiation Related Protein) gene, we have isolated the genomic clone of bovine ADRP and determined its sequence. A genomic Southern blot analysis confirmed that ADRP gene is present as a single copy in bovine genome and the ADRP gene spans 12 kb. Bovine ADRP genomic clone, HwADRPg-1, had 8 exons and 7 introns, and all splicing sites conformed to the GT/AG rule with the exon-intron boundaries located exactly. Analysis of the upstream 649 bp of the sequence of HwADRPg-1 showed that it does not contain any canonical TATAA boxes; however Sp1 binding sites and CAAT boxes are found. The promoter contained potential binding sites for AP-1, AP-2 and several putative transcription factor binding sites. The 5'-flanking region of HwADRPg-1 contained muscle specific transcription activator Myo G and C/EBP (CCAAT/ enhancer binding protein) recognizing site. These results suppose that the Myo G transcription activator regulate the transcription of bovine ADRP gene in muscular tissue and its transcriptional activity was triggered by degree of muscular development. Our results provide the necessary analysis for other flanking sequences are needed in addition to the proximal cis elements of this promoter to confer adipocyte differentiation-dependent or growth-dependent transcriptional control.

• Microbiology and Biotechnology Letters
• /
• v.34 no.4
• /
• pp.311-317
• /
• 2006

Using PCR amplification, we cloned a cellulase gene (ce/H) from the Bacillus subtilis AH18 which has plant growth-promoting activity and antagonistic ability against pepper blight caused by Phytophthora capsici. The 1.6 kb PCR fragment contained the full sequence of the cellulase gene and the 1,582 bp gene deduced a 508 amino acid sequence. Similarity search in protein database revealed that the cellulase of B. subtilis AH18 was more than 98% homologous in the amino acid sequence to those of several major Bacillus spp. The ce/H was expressed in E. coli under an IPTG inducible lac promoter on the vector, had apparent molecular weight of about 55 kDa upon CMC-SDS-PAGE analysis. Partially purified cellulase had not only cellulolytic activity toward carboxymethyl-cellulose (CMC) but also insoluble cellulose, such as Avicel and filter paper (Whatman No. 1). In addition, the cellulase could degrade a fungal cell wall of Phytophthora capsici. The optimum pH and temperature of the ce/H coded cellulase were determined to be pH 5.0 and $50^{\circ}C$. The enzyme activity was activated by $AgNO_3$ or $CoCl_2$. However its activity was Inhibited by $HgC1_2$. The enzyme activity was activated by hydroxy urea or sodium azide and inhibited by CDTA or EDTA. The results indicate that the cellulase gene, ce/H is an antifungal mechanism of B. subtilis AH18 against phytophthora blight disease in red-pepper.

• Journal of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.15-17
• /
• 1957

1. Preparation of Titanium tetrachloride; The following precesses were strictly followed as the preliminary step to obtain pure $TiOCl_2$, titanyl chloride; First, pure Titanium Oxide mixed with carbon is rolled into pills. After drying up perfectly, these pills are heated at 900∼1000${\circ}C$. And then the pills are subjected to the flow of $Cl_2$ gas in a quartz tube heated to 900-1000${\circ}C$. Thus Titanium tetrachloride is obtained. 2. Preparation of $TiOCl_2$ ; Yellowish trobrown solution is made by pouring 80 g of conc. HCl (sp.gr. 1.19) to 45 gr of Titanium tetrachloride (approx. 2 times of theoretical amount). Then this solution is kept settled for 5-days in a desiccator filled with phosphorous pentoxide at room temperature. As the colorless amorphous solid thus obtained is washed with aceton, 36.5 g of the pure salt are obtained. 3. Determination of composition. The analysis of the sample taken from the deposit desiccated gives the following data; (A) Qualitative analysis; a) $Ti(OH)_4$ is precipitated by adding NaOH in water solution of the salt. b) Adding $AgNO_3$ solution, the water solution of the salt gives white precipitate of AgCl. c) When acid and $H_2O_2$ are added, the solution turns its color to redish brown (This proves that $TiO^{++}$ was converted into $TiO^{++}$ by oxidation of $H_2O_2$. (B) Quantitative analysis; a) $Ti(OH)_4$ precipitated by $10{\%}$ NaOH isalitatsubjected consecutively to the filtration and ignition in porcelain crucible at approx. 1000${\circ}C$. , then $TiO_2$ thus formed is weighed and calculated into Ti content. b) Chlorine involved in water solution of the salt is determined by Vorhardt method. Result: The values obtained from previous analysis, devied by their atomic weight gives the following composition: Ti : Cl = 1 : 2 Therefore $TiOCl_2$ should be given as its molecular formula. 4. Summary. When $TiCl_4$ is additated into conc. HCl, $TiO^{++}$ formed exists as a stable form, and forms $TiOCl_2$. However $TiOCl_2$ is unstable to heating. When the temperature is raised to $65{\circ}C$the decomposition of the solution is accelerated, and gives $TiO_2$ aq. $TiOCl_2$ in addition is highly hygroscopic.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.47-52
• /
• 2005

Worldwide movement for prohibition of Pb usage drives imminent implementation of Pb-free solders in microelectronic packaging industry. Reliability information of Pb-free solders has not been completely constructed yet. One of the potential reliability concerns of Pb-free solders is allotropic transformation of Sn known as tin pest. Volume increase during the formation of tin pest could deteriorate the reliability of solder joints. It was also reported that the addition of soluble elements (i.e. Pb, Bi, and Sb) into Sn can effectively suppress the tin pest. However, the mechanical properties of the tin pest resistant alloys have not been studied in detail. In this study, lap shear creep test was conducted with Sn and Sn-0.7Cu based solder alloys doped with minor amount of Bi or Sb. Shear strain rates of the alloy were generally higher than those of Sn-3.5Ag based alloys. Rupture strains and corresponding Monkman- Grant products were largest for Sn-0.5Bi alloy and smallest for Sn-0.7Cu-0.5Sb alloy. Rupture surface Sn-0.5Bi alloy showed highly elongated $\beta$-Sn globules necked to rupture by shear stresses, while elongation of $\beta$-Sn globules of Sn-0.7Cu-0.5Sb alloy was relatively smaller.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.49-54
• /
• 2020

To attach a stretchable/flexible electrode to something or something to on electrode, conductive adhesives must be stretchable/flexible to suit the properties of the electrode. In particular, conductive adhesive require durability and heat resistance, and unlike conventional adhesives, they should also have conductivity. To this end, Epoxy, which has good strength and adhesion, was selected as an adhesive, and a plasticizer and a reinforcement were mixed instead of a two-liquid material consisting of a conventional theme and a hardener, and a four-liquid material was used to give stretchability/flexibility to high molecules. The conductive filler was selected as silver, a material with low resistance, and for high conductivity, three shapes of Ag particles were used to increase packing density. Conductivity was compared with these developed conductive adhesives and two epoxy-based conductive adhesives being sold in practice, and about 10 times better conductivity results were obtained than products being actually sold. In addition, conductivity, mechanical properties, adhesion and strength were evaluated according to the presence of plasticizers and reinforcement agent. There was also no problem with 60% tensile after 5 minutes of curing at 120℃, and pencil hardness was excellently measured at 6H. As a result of checking the adhesion of electrodes through 3M tape test, all of them showed excellent results regardless of the mixing ratio of binders. After attaching the Cu sheet on top of the electrode through conductive adhesive, the contact resistance was checked and showed excellent performance with 0.3 Ω.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.371-376
• /
• 2014

The process of flip-chip bump bonding, Au wire bonding and encapsulation were sucessfully developed and modularized. The CdTe sensor and ROIC were optimally jointed together at $150^{\circ}C$ and $270^{\circ}C$ respectively under24.5 N for 30s. To make SnAg bump on ROIC easy to be bonded, the higher bonding temperature was established than CdTe sensor's. In addition, the bonding pressure was lowered minimally because CdTe Sensor is easier to break than Si Sensor. CdTe multi-energy sensor module observed were no electrical failures in the joints using developed flip chip bump bonding and Au wire bonding process. As a result of measurement, shearing force was $2.45kgf/mm^2$ and, it is enough bonding force against threshold force, $2kgf/mm^2s$.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.10 no.2
• /
• pp.166-172
• /
• 2007

Purpose: It has recently been reported that de novo HBV infection following liver transplantation is caused by grafts from HBcAb positive donors, and this phenomenon has been observed in one third of the liver transplant patients in our center. Therefore, we investigated the presence of HBV virus DNA in liver tissues obtained from HBcAb positive donors to determine the mechanism by which de novo HBV infection occurs. Methods: This study was conducted on 6 patients that were HBsAg negative, HBsAb positive, and HBcAb positive who were donors for liver transplantation between November 1997 and November 1998 at Asan Medical Center. We isolated DNA from a portion of liver biopsy tissues that were obtained during the operation, and then identified the surface and core region of HBV DNA using nested PCR. In addition, four children who received liver grafts from these donors were monitored to determine if they became afflicted with non-HBV related diseases while receiving prophylaxis consisting of short-term HBIG treatment and long-term treatment with an antiviral agent. Results: The surface antigen region was identified in all 6 donors and the core antigen region was observed in 4 of the 6 donors. However, no episodes of de novo HBV infection with prophylaxis were observed. Conclusion: The results of this study support the results of previous studies, which indicated that HBV infection may be the main cause of de novo HBV infection in patients that receive HBsAb positive and HBcAb positive donor grafts.