• KCI Concrete Journal
• /
• v.14 no.4
• /
• pp.171-177
• /
• 2002

Antifungal agents are used to impart antibacterial or bactericidal properties to commodities and various articles used in industries and can be classified into two broad groups i.e organic and inorganic. Inorganic antifungal agents comprise of Ag, Zn, or Cu, etc. These elements tend to exhibit high level of antifungal activities, non-uniform dispersion in substrates, and have poor properties in expensive and cheap adhesiveness. In this study, the organic antifungal agent was used for the purpose of investigating the antifungal activity of antifungal agent activated-cement mortar (AACM) on the aspergilus niger of various fungus which can be easily discovered in the interiors and exteriors of buildings. In addition, an experiment on the basic physical properties of AACM such as compressive and flexural strength was carried out. The conclusion of this investigation revealed that a dosage increase of antifungal agent exhibits a high inhibitory effect on the aspergilus niger, and although there is a slight decrease in the strength of AACM, the strength of AACM was almost equal to that of inactivated cement mortar.

• The Korean Journal of Ceramics
• /
• v.7 no.2
• /
• pp.58-62
• /
• 2001

The relationship between the addition of Sb$_2$O$_3$ and the color difference by solarization in photosensitive glasses was investigated. Glasses containing CeO$_2$ and Sb$_2$O$_3$ simultaneously and glasses with only CeO$_2$ were changed reddish and yellowish respectively after exposing to ultra violet ray. Color difference between compositions was represented by dominant wavelength and purity. Since, in glasses containing CeO$_2$ and Sb$_2$O$_3$ simultaneously, Sb$_2$O$_3$ as reduction agent affected Ce$^3+$ ions to increase in glass and more Ce$^4+$ ions were induced than in glasses with only CeO$_2$ during UV irradiation, more electrons released by photo-ionization, which were color centers, were trapped by Ce$^4+$. In conclusion, the introduction of Sb$_2$O$_3$ to photosensitive glasses with CeO$_2$ resulted in the change of color center concentration in glasses and prevented the solarization of photosensitive glasses with CeO$_2$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.2
• /
• pp.115-118
• /
• 2017

Highly photosensitive and wide bandgap amorphous silicon oxide (a-$SiO_x$:H) films were developed at low temperature ranges ($100{\sim}150^{\circ}C$) with employing plasma-enhanced chemical vapor deposition by optimizing $H_2/SiH_4$ gas ratio and $CO_2$ flow. Photosensitivity more than $10^5$ and wide bandgap (1.81~1.85 eV) properties were used for making the a-$SiO_x$:H thin film solar cells, which exhibited a high open circuit voltage of 0.987 V at the substrate temperature of $100^{\circ}C$. In addition, a power conversion efficiency of 6.87% for the cell could be improved up to 7.77% by employing a new n-type nc-$SiO_x$:H/ZnO:Al/Ag triple back-reflector that offers better short circuit currents in the thin film photovoltaic devices.

• Journal of Plant Biotechnology
• /
• v.36 no.1
• /
• pp.81-86
• /
• 2009

An efficient and reproducible plant regeneration system was established using transverse thin cell layers (tTCLs) in five cultivars of Brassjca juncea L. The effects of medium conditions, explant types (tTCLs of hypcotyl and cotyledonary petiole) on shoot regeneration were examined in this study. The maximum shoot regeneration frequency was obtained in Murashige and Skoog (MS) medium supplemented with 4 mg/L 6-benzylaminopurine (BA) and 0.2 mg/L 1-naphthaleneacetic acid (NAA). The hypocotyls derived tTCL explants had more shoot regeneration frequency (52%) than the cotyledonary petiole derived tTCL explants. Shoot induction was further improved by the addition of silver nitrate ($AgNO_3$) in the regeneration medium. A significant genotypic effect was also observed between the five cultivars; Rai-5 displayed higher capacities to produce shoots than other cultivars. Regenerated shoots were rooted on MS basal medium without PGRs which induced 90% of roots. The plantlets established in greenhouse conditions with 99% survival, flowered normally and set seeds. The regenerated plants were fertile and identical to source plants.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.134-139
• /
• 2007

This paper presents a computer-based analysis on the thermal shock characteristics of Pb-free solder joints and UBM in flip chip assemblies. Among four types of popular UBM systems, TiW/Cu system with 95.5Sn-3.9Ag-0.6Cu solder joints was chosen for simulation. A simple 3D finite element model was first created only including silicon die, mixture between underfill and solder joints, and substrate. The displacements due to CTE mismatch between silicon die and substrate was then obtained through FE analysis. Finally, the obtained displacements were applied as mechanical loads to the whole 2D FE model and the characteristics of flip chip assemblies were analyzed. In addition, based on the hyperbolic sine law, the accumulated creep strain of Pb-free solder joints was calculated to predict the fatigue life of flip chip assemblies under thermal shock environments. The proposed method for fatigue life prediction will be evaluated through the cross check of the test results in the future work.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.248-251
• /
• 2000

The fabrication and characteristics of HTS race-track type field coil for generators was carried out. Field coils are composed of 3 pancake coils wound by 37-filamental Bi-2223/Ag-alloy tapes. The winding machine is horizontal type. The critical currents (I$_c$) of the superconducting tapes were measured with variation of bending strain and external magnetic fields. I$_c$ of both whole field coils and 3 pancake coils were measured as a function of temperature. At 77K under the self-field, I$_c$ of whole field coils was 12A, while in the case of middle pancake coil, I$_c$ was 15A. The distribution of magnetic field B was obtained, using 3-D FEM. Our simulation showed that maximums of B${\bot}$A in x-y plane were locally distributed in both the upper and the lower coils. In addition, the fabrication processes and the characteristics of field coil are described.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.288-293
• /
• 2006

Basic investigations have been carried out for the solvent extraction of silver contained in the waste photographic fixing solution using D2EHPA as an extractant. Extraction experiments were conducted using artificial waste solution which was made by dissolving $AgNO_3$ in distilled water along with actual waste fixing solution. For artificial waste solution, the extraction of silver was found to occur very rapidly at the initial stage of extraction. In addition, more silver was extracted as the volumetric ratio between aqueous phase and organic phase was decreased. The volumetric ratio of organic extractant to diluent was also taken as an influential variable and the extracted amount of silver was observed to decrease with temperature. The characteristics of silver extraction for actual fixing solution was generally similar to that for artificial waste solution. Regarding the kinetic analysis, the extraction of silver contained in the actual solution was observed to follow a first order reaction.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.90-96
• /
• 2011

In this study, the characteristic of fractured portion and shape on solder joints were investigated according to the thermal shock test for Automotive Application Component using Sn-3.0Ag-0.5Cu solder, which has a outstanding property as Lead-free solder. The value of pull and shear strength was decreased in principle after 432 cycles thermal shock test. In addition, fracture mode was verified by using EDS and SEM to observe fractured shape on the solder joints before and after thermal shock. In before thermal shock test, the fracture mode revealed typically solder layer's fracture mode. In after thermal shock test, we identified multiple fracture mode of the ductile and brittle fracture. Even though same composition of solder was used to experimental for estimating. the fracture mode varied on the fracture portion's height and the directional angles of shear strength. In conclusion, we identified that mechanical strength was affected on the solder layer's fracture mode.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.1
• /
• pp.69-76
• /
• 1998

This study was conducted to construct of the transgenic plants wliich are resistant to oxidative stresses including ozone with B. mpestris cytosolic glutathione reductase cDNA using the binary vector system of Agrobacterium tumefaciens. The 1.8kb B. campestris cytosolic GR cDNA was subcloned into the unique Sma I site of the plant transformation vector pBKSI- I, downstream of the constitutive CaMV 35s promoter and upstream of the nos termination sequence, in place of the uidA (GUS) reporter gene. The resulting plant transformation vector, pBKS-GRI, was introduced into A. tumefaciens LBA4404 by two cycles of tkeze-thaw method. The B. nqus cotyledonary petioles were transformed by the Agrubaferium harboring pBKS-GRI. Transformed shoots were induced and selected on regeneration medium supplemented with kanarnycin. The shoot formation was increased remarkably by addition of Ag$NO_3$, in MS media. The transgenic plants were analyzed for the presence of the B. campestris GR gene by Southern blot analysis and it was confirmed that a foregin gene was stably integrated into the genomes of B. nqus plants.

• The Korean Journal of Mycology
• /
• v.39 no.3
• /
• pp.235-238
• /
• 2011

Agrobacterium harboring vector pCHBs with hygromycin phosphotransferase(hph) and hepatitis B virus surface antigen(HBsAg)gene was transformed into the mycelial culture of Flammulina velutipes. In particular, mild NaOH solution was treated to the mycelia before Agrobacterium infection step. This was purposed to generate putative surface wounds in the mycelial cell walls. The results showed that hygromycin-resistant($hyg^r$) mycelia could be obtained only from NaOH-treated mycelia but not from intact mycelia. The integration of $hyg^r$ gene in fungal genome was confirmed by PCR. In addition, a single transgene integration and heterologous protein expression in F. velutipes could be verified by Southern blot hybridization and western blot analysis, respectively. This study demonstrated an efficient tool for the Agrobacterium-mediated transformation of F. velutipes mycelia.