• Advances in materials Research
• /
• v.13 no.3
• /
• pp.183-194
• /
• 2024

D3 tools steel and 440C stainless steel (SS) are normally being employed for application such as knife blade and cutting tools. These steels are iron alloys which have high carbon and high chromium content. In this study, lab work focused on the microstructural and corrosion behavior of D3 tools steel and 440C SS after went through heat treatment processes. Heat treatments for both steels were started with normalizing at 1020 ℃, continue with hardening at 1000 ℃followed by oil quenching. Cryogenic treatment was carried out in liquid nitrogen for 24 hours. The addition of cryogenic heat treatment is believed to increase the hardness and corrosion resistance for steels. Both samples were then tempered at two different tempering temperatures, 160 ℃ and 426 ℃. For corrosion test, the samples were immersed in NaCl solution for 30 days to study the corrosion behavior of D3 tool steel and 440C SS after heat treatment. The mechanical properties of these steels have been investigated using Rockwell hardness machine before heat treatment, after heat treatment (before corrosion) and after corrosion test. Microstructure observation of samples was carried out by scanning electron microscopy. The corrosion rate of these steels was calculated after the corrosion test completed. From the results, the highest hardness is observed for D3 tool steel which tempered at 160 ℃(54.1 HRC). In terms of microstructural analysis, primary carbide and pearlite in the as-received samples transform to tempered martensite and cementite after heat treatment process. From this research, for corrosion test, heat treated 440C SS sample tempered with 426 ℃possessed the excellent corrosion resistance with corrosion rate 0.2808 mm/year.

• Biomolecules & Therapeutics
• /
• v.8 no.2
• /
• pp.167-170
• /
• 2000

The present study was conducted to investigate the acute toxicity of plant sterol ester by a single oral dose in Sprague-Dawley rats. Ten males and 10 females aged 5 weeks were randomly assigned to two groups of 5 rats each and were administered by gavage at dose level of 0 or 20 ml/kg body weight. Parameters measured during the 14-day observation period were mortality, clinical signs, body weight changes, and gross findings. No mortality was observed in the present study. Treatment-related clinical signs, such as pasty stool and diarrhea, were observed on the day of treatment and these signs resulted in soiled fur on day 1 after the treatment. However, no clinical signs were observed on days 2-14 after the treatment. There was no significant difference in body weight changes between the control and treatment groups. At necropsy on day 14 after the treatment, no treatment-related gross findings were observed in the treatment group. Based on these results, it was concluded that a single oral dose of plant sterol ester induced pasty stool and diarrhea in Sprague-Dawley rats at dose level of 20 ml/kg and that the lethal doses were considered to be over 20 ml/kg for both sexes.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.57 no.4
• /
• pp.16-24
• /
• 2015

Desalination technology is a process to remove salt from water. There are three classified In accordance with the concentration of salt The concentration of sea water 15,000~50,000mg/l, brackish water 1,500~15,000mg/l, desalination less than 500mg/l.. In general, salt to remove for using a pre-treatment UF filter, but this study is new pre-treatment technology RO Membrane process technology Suspended particulate matter is said most were treated at the pre-treatment equipment, wheat affluent particulate material was removed from the MF filter. Influent SS 16.2mg /l The treatment was effective in treatment 0.05mg /l of 99% is removed. COD is reduced to 60% in the pre-treatment device, after treatment was reduced to 30% RO membrane. Influent COD 10.2mg/l treatment was removed 1.9mg/l. The removal rate is 81.9%. Desalination removes the ionic substances in the RO Membrane. Influent EC $978.8{\mu}s/cm$ and treatment showed a result of $18.7{\mu}s/cm$.

• Journal of Korean Dental Science
• /
• v.14 no.2
• /
• pp.79-89
• /
• 2021

Purpose: The technique introduced in this study describes a technique for surface treatment that applies a photocuring resin to the surface of an interim crown fabricated by three-dimensional (3D) printing without a conventional polishing method. The purpose of this study was to evaluate marginal and internal fit and the intaglio surface trueness of interim crowns after surface treatment of 3D-printed crowns for clinical application. Materials and Methods: An interim crown was fabricated using a 3D printer with digital light-processing technology, and the surface support was removed. After the posttreatment process, the resin was thinly applied to the surface of the interim crown and polymerized to solve the esthetic problem of the surface without the conventional polishing process. In addition, the marginal and internal fits were measured to verify the clinical use of this technique, and the trueness was evaluated to confirm the deformation of the inner surface according to the technical application of the outer surface of the interim crown. The difference before and after the evaluation by a statistical method was verified using an independent t-test (α=0.05). Result: There was no significant difference in the marginal and internal fit before and after the application of this technique (P>0.05). There was no significant difference in intaglio surface trueness before and after the application of this technique (P=0.963). Conclusion: There was no change in the marginal and internal fit or in intaglio surface trueness of the interim crowns to which this technology was applied. This surface treatment technique is a more convenient method for interim crowns fabricated using 3D-printing technology without the conventional polishing process.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.880-889
• /
• 2016

To evaluate the resistance of wood to decay caused by fungi, sapwood and heartwood of red pine (Pinus densiflora) and sapwood and heartwood of larch (Larix kaempferi) were conducted. Wood samples were immersed for 96 h in pyroligneous liquor. Then, the brown-rot fungus, Fomitopsis palustris, was used to examine the decay resistance of red pine and larch. Weight and density of wood from the all conditions increased after immersion treatment. Weight loss after decay resistance test was also dropped with a immersion treatment. The lowest weight loss indicated at immersion-treated heartwood of larch. Immersion treatment using pyroligneous liquor effectively increased the resistance of wood to decay caused by fungi.

• Corrosion Science and Technology
• /
• v.21 no.6
• /
• pp.495-502
• /
• 2022

Anodization is a representative electrochemical surface treatment method that can improve both heat resistance and corrosion resistance by forming an anodization film on the surface of the aluminum. However, these properties can be changed after an additional heat treatment process. In this study, Al 6061 was subjected to an anodization process at 60 V for 1 hour, 5 hours, or 9 hours. An additional heat treatment process was performed at 500 ℃ for 30 minutes. Field emission scanning electron microscopy (FE-SEM) analysis revealed that the thickness of the anodized film was increased in proportion to the anodization time. Both pore size and pore diameter of the anodized film was also increased after anodization. After an additional heat treatment process, there were no significant changes in the thickness, pore size, or pore diameter of the anodized film. Heat resistance was confirmed through thermal analysis and chemical resistance was evaluated with a potentiodynamic polarization test.

• Journal of Animal Science and Technology
• /
• v.63 no.2
• /
• pp.426-439
• /
• 2021

It is already well known that castration improves marbling quality but exact timing of castration is still highly debated in beef cattle production industry. After castration, blood hormonal changes occur in steer and objective of this study was to investigate the effects of growth hormone (GH) levels on adipocyte differentiation in stromal vascular cells (SVCs) and transdifferentiation into adipocytes in C2C12 myoblasts. Total GH concentrations were measured via enzyme-linked immunosorbent assay (ELISA) in 24 male calves and 4 female calves. Cell proliferation, cellular triglyceride (TG) accumulation, and the cell's lipolytic capability were measured in C2C12 myoblasts and SVCs. Myogenic, adipogenic, and brown adipocyte-specific gene expression was measured via real-time polymerase chain reaction (PCR) using SYBR green. Serum GH levels were the highest in late-castrated calves. Treatment with 5 ng/mL GH resulted in greater TG accumulation as well as increased CCAAT-enhancer-binding protein (C/EBP)α and peroxisome proliferator-activated receptor (PPAR)γ expression compared to that after treatment with 15 ng/mL GH. Treatment with 5 ng/mL GH also resulted in lower myogenin (myo)G and myoD expression compared to that after treatment with 15 ng/mL GH. The expression of bone morphogenetic protein (BMP) 7 after treatment with 5 ng/mL GH was higher than that after treatment with 15 ng/mL GH. But carcass characteristics data showed no significant difference between early and late castrated steers. Therefore, our results indicate that castration timing does not seem to be inevitable determinate of carcass qualities, particularly carcass weight and marbling score in Hanwoo beef cattle.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.260-263
• /
• 2004

Since Outerrace is one of the components of driving shaft for power train of automobile and transmits high torque, high strength and high toughness are necessary so forging process is adopted to manufacture such parts. Therefore, in order to improve strength and toughness, heat treatment is accomplished after plastic deformation(forging). Because Each component of driving shaft is mounted to automobile after a series of forging, machining and heat treatment, in order to evaluate mechanical properties of such components in use, plastic deformation and heat treatment must be considered. So, in this paper, tensile tests are performed with tensile specimens which have passed through a series of upsetting, machining and heat treatment to evaluate mechanical properties of such components.

• Transactions of Materials Processing
• /
• v.23 no.2
• /
• pp.82-87
• /
• 2014

The plastic strain ratio is one of the factors that affect the deep drawability of Al alloy sheet. The deep drawability of Al alloy sheet is limited because of its low plastic strain ratio. Therefore an increase in the plastic strain ratio to improve the deep drawability of Al alloy sheet is needed. The current study investigated the increase of the plastic strain ratio and the change in texture of AA5083 Al alloy sheet after a 2 step asymmetric rolling with heat treatments. The average plastic strain ratio of initial AA5083 Al alloy sheets was 0.83. After the first asymmetric rolling step of 88% deformation and subsequent heat treatment at $320^{\circ}C$ for 10 minutes the value was still 0.83. After the second asymmetric rolling of 14% reduction and subsequent heat treatment at $330^{\circ}C$ for 10 minutes the plastic strain ratio rose to 1.01. The average plastic strain ratio after the 2 step asymmetric rolling and heat treatment is 1.2 times higher than that of initial AA5083 Al alloy sheet. This result is related to the development of ND/<111> texture component after the second asymmetric rolling and heat treatment.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.2
• /
• pp.101-105
• /
• 2004

After extrusion, cold rolling and T-6 treatment, texture development of 7x1x Al-alloy with 0.1% Sc is studied. During extrusion the very strong <111>+weak <100> fiber texture is developed, which is Influenced on the formation of rolling texture. The texture after 80% cold rolling can be described by strong{112}<111>(Cu)+{123}<634>(S) component in the cross section of the extruded rod, the strong -fiber+weak{110}<001>(Goss) components in the longitudinal section, and the strong {110}<112>(Bs)+weak{001}<100>(Cube) components in the transverse section. The components of rolling texture are remained after T-6 treatment, but the maximum density of ODF is higher. The calculated mean r-values and the planar anisotropy are relatively high, which are dependent on the texture. After T-6 treatment, recrystallized equiaxed grains with average grain size of $1{\sim}2{\mu}m$ are obtained.