• Korean Journal of Food Science and Technology
• /
• v.7 no.4
• /
• pp.194-199
• /
• 1975

The physiological and chemical investigations to explain the after-ripening processes in got green pepper fruit were carried out by treating the fruit with ethephon either alone or with phenylalanine. The studied metabolic changes in fruit during after-ripening period was carbon dioxide and oxygen concentration in interior of the pepper fruit, total carotenoid, ${\beta}-carotene$, total sugar, and free reducing sugar in pepper fruit. These metabolic changes were explained inrelation to the color enhancement judged by the color score to explain the after-ripening processes. Ethephon treatment at 500 ppm significantly accelerated color enhancement as compared to the control and further ethephon treatment increased the number by 20 percent which was not possible in control during same after-ripening period. The oxygen concentration in interior of the pepper fruit during after-ripening period was increased in control when the color score (color enhancement) increased rapidly. However, with ethephon treatment, the oxygen concentration was decreased when the color score increased. Although total and free reducing sugar content were decreased during the after-ripening period total carotenoid and ${\beta}-carotene$ content was increased by 50 and 200 percent, respectively, over control. Also the capsaicin contents was increased by 20 percent by ethephon treatment over control. Although phenylalanine treatment did not affect the capsaicin content, capsaicin content tended to be increased by phenylalanine treatment when treated with ethephon. Acknowledgements: This work was supported by funds from Korean Traders Scholarship Foundation.

• Journal of radiological science and technology
• /
• v.20 no.1
• /
• pp.43-49
• /
• 1997

Purpose of this paper is to extend help for clinical application in balloon cholangiography on patients who have undergone endoscopic sphincterotomy, impacted stones of intrahepatic duct, and missed bile duct because of other diseases in operating endoscopic retrograde cholangiopancreatography. This study was done for the patients who had clinical signs of biliary diseases from January to December In 1996. We studied 45 patients who had endoscopic sphincterotomy, re-examination after interventional treatment of the endoscopic retrograde cholangiopancreatography, and uncertain diagnosis due to common bile duct and intrahepatic duct those are not filled with contrast media. Balloon cholangiography was performed in case of uncertain diagnosis while operating endoscopic retrograde cholangiopancreatography. First of all, we insert balloon catheter Into the working channel of treatment jejunofiberscope and remove treatment Jejunofiberscope after ballooning, and lastly take biliary tract X-ray after Injection and changing position of patient. The results of this study were as follows. (1) In classification of diseases, stones of gall bladder, those of common bile duct, and those of intrahepatic duct were 30 cases, fistula was 1 case. (2) In total cases of 45, only diagnosis were 25 cases, interventional treatment were 20 cases. (3) In case of interventional treatment, endoscopic sphincterotomy and endoscopic nasobiliary drainage, and stone removal were about the same, 7, 7, 6 respectively. Balloon cholangiography will be useful to prevent patients from having repeated and unnecessary studies for the cases above explained. It is considered that this study will be useful for clinical application in terms of reducing medical expenses, pain while examination, and consultation hours.

• Physical Therapy Korea
• /
• v.9 no.2
• /
• pp.51-59
• /
• 2002

The purpose of this study was to determine the effect of intramuscular stimulation (IMS) therapy in older persons with musculoskeletal pain. The subjects were 181 older persons (54 males, 127 females) with musculoskeletal pain. Intramuscular stimulation unit with needles (size $.3{\times}30$ mm) was applied for the treatment. The analgesic effects were measured by visual analog scale (VAS). Results showed that the post-treatment VAS score was significantly decreased after IMS therapy for fifteen minutes compared to pre-treatment score. In addition, the post-treatment VAS score was significantly decreased in patients with chronic pain (pain duration of one year after onset) compared to the post-treatment VAS score in patients with subacute pain (pain duration less than three months after onset). There was no significant difference in analgesic effects according to gender and age groups. It is determined from this study that IMS therapy can be beneficial for patients with chronic musculoskeletal pain in clinical setting. Further study is needed to identify whether the IMS therapy can change the pain threshold in patients with neurologic pain.

• Journal of the Korean Society of Physical Medicine
• /
• v.18 no.3
• /
• pp.73-84
• /
• 2023

PURPOSE: This study analyzed the impact of AI and biosensors on physical therapy, identifying the stage of customized technology development and future prospects. AI and biosensors improve the efficiency, establish customized treatment plans, and expand patient treatment opportunities. The study employed a literature review by searching databases and collecting research. METHODS: This study searched various databases related to the topic, collected existing research, papers, and reports, evaluated the literature, and summarize the results. RESULTS: Exercise therapy utilizing artificial intelligence can provide personalized and optimal exercise plans while monitoring rehabilitation progress. In addition, biosensors such as EMG sensors and accelerometers can monitor the individual progress in physical therapy, particularly in stroke patients, which can help improve physical therapy strategy and promote patient recovery. CONCLUSION: This study suggested that artificial intelligence can be applied in many areas of physical therapy, such as exercise therapy, customized treatment plans, rehabilitation and management, pain management, neuro rehabilitation, and auxiliary devices. Using AI technology, it is possible to analyze and improve exercise and posture, retrain the central nervous system, establish customized treatment plans for individual patients, predict and compare patient progress before and after treatment, and provide customized pain analysis and treatment methods. In addition, AI can provide neuro rehabilitation programs and customized auxiliary devices.

• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.4
• /
• pp.195-200
• /
• 1992

SCM 415 has been vacuum carburized in the carburizing pressure of 60-65kpa and the carburizing temperature of 1233k and 1273k after varied to 0-20 in the ratio of $N_2/C_3H_8$ and then diffusion treated for various times at 1123k. The results obtained from the experiment are as follows. 1. With increasing from 0 to 20 in ratio of $N_2/C_3H_8$ the sooting formation of surface after carburizing considerably decreased. 2. The hardness control and surface carbon content of carburizing surface has been modified by the addition of nitrogen to the propan. 3. The appoximate value of k is indirectry calculated at 1123k which results are obtained to $0.58{\times}10^{-2}(wt.%.S^{-1/2})$. 4. A great deal of propan by addition of nitrogen gas in carburizing gas was possible to saving without considerable change in case hardening depth. 5. The effective carburizing depth range is obtained to 0.8-1.1mm by diffusion temperature of 1123k after carburization at 1273k-3.6ks, and the surface hardness is increased as the increasing of $T_D/T_c$ in our experimental condition, and the maximum hardness as reachin distance from surface is decreased.

• Tribology and Lubricants
• /
• v.35 no.3
• /
• pp.176-182
• /
• 2019

The primary objective of this study is to treat a monocrystalline silicon (Si) wafer having a thickness of $279{\mu}m$ by employing the ultrasonic nanocrystal surface modification (UNSM) technology for improving the efficiency and service life of nano-electromechanical systems (NEMSs) and micro-electromechanical systems (MEMSs) by enhancing of wear and corrosion resistances. The wear and corrosion resistances of the Si wafer were systematically investigated before and after UNSM treatment, wherein abrasive, oxidative and spalling wear mechanisms were applied to the as-received and subsequently UNSM-treated Si wafer. Compared to the asreceived state, the wear and corrosion resistances of the UNSM-treated Si wafer are found to be enhanced by about 23% and 14%, respectively. The enhancement in wear and corrosion resistances after UNSM treatment may be attributed to grain size refinement (confirmed by Raman spectroscopy) and modified surface integrity. Furthermore, it is observed that the Raman intensity reduced significantly after UNSM treatment, whereas neither the Raman shift nor new phases were found on the surface of the UNSM-treated Si wafer. In addition, the friction coefficient values of the as-received and UNSM-treated Si wafers are found to be about 0.54 and 0.39, respectively. Hence, UNSM technology can be effectively incorporated as an alternative mechanical surface treatment for NEMSs and MEMSs comprising Si wafers.

• Korean Journal of Veterinary Service
• /
• v.30 no.1
• /
• pp.115-123
• /
• 2007

The therapeutic effect of honeybee venom collected using be venom collector on bovine mastitis was investigated. Mastitic cows from four farms were selected in the Yang-pyeong areas. Chronic mastitic cows were injected with the various concentrations of honey-bee venom per day. There was a significant difference in the reduction rates of somatic cell counts (SCC) according to treatment concentration and method of bee venom. The milk SCC were significantly decreased in all concentrations of bee venom 3 days after treatment. The reduction rates of SCC in treatment of 3, 6, 12 and 24mg honeybee venom were 20, 43, 63.3 and 65.8% respectively. Honeybee venom treatment consisted of two methods, a syringeful and a Bovivet Spenstift. The treatment with Bovivet Spenstift was more effective in the reduction rates of SCC compared with the syringeful. Thirty two out of 53 quarters were cured by Bovivet Spenstift with 12mg bee venom per day for 14 days. The venom cure rates of bovine mastitis by Escherichia coli, Stapylococcus aureus, Gram positive bacteria and Gram negative bacteria were 33.3, 75, 75 and 43.8% respectively. These results suggested that bee venom treatment (by Bovivet Spenstift with 12mg) might be effective for treatment of bovine mastitis.

• 대한생식의학회:학술대회논문집
• /
• 2007.11a
• /
• pp.122-122
• /
• 2007

• Tribology and Lubricants
• /
• v.36 no.1
• /
• pp.47-54
• /
• 2020

In this study, the effects of ultrasonic nanocrystal surface modification (UNSM) treatment at room and high temperatures (RT and HT of 400℃) on friction and wear behavior of Ti-6Al-4V alloy prepared by selective laser melting (SLM) were investigated. The objective of this study is to improve the mechanical properties and frictional behavior of Ti-6Al-4V alloy by UNSM treatment. Dry friction and wear tests were conducted using a ball-on-disk method at RT with a bearing steel as the counter ball. Due to the high HT and UNSM treatment, the surface hardness tended to increase and surface roughness tended to reduce. X-ray diffraction (XRD) analysis showed that nanocrystallization structure and compressive residual stress were formed at the surface layer after UNSM treatment at both RT and HT. After UNSM treatment, it was observed that the wear rate was reduced by about 6% for the specimen treated at RT and a 28% reduction for the specimen treated at HT in comparison with the untreated one. Based on scanning electron microscope (SEM) images showed that the damage caused by fatigue wear occurred in the wear track of the heat-treated specimen, and it is believed to be the cause of the highest wear rate. Mechanical properties and wear resistance of Ti-6Al-4V alloy were improved and prospect of industrial application was confirmed. Further research is still required to improve the characteristics of SLM Ti-6Al-4V alloy to the level of wrought Ti-6Al-4V alloy.

• Journal of the Korean Ceramic Society
• /
• v.48 no.2
• /
• pp.160-167
• /
• 2011

Plasma sprayed ceramic coatings inherently contain pores and usually also cracks. Post-treatment of the plasma sprayed coatings is a way to close the connected pores and cracks. In this study, post-sealing treatment in plasma sprayed $Al_2O_3$ coatings was employed to overcome the reduction of coating properties. $Al_2O_3$ plasma thermal spray coating was made on aluminum alloys plate, $CrO_3$ post coating and heat treatment at $550^{\circ}C$ was carried out in order for final $Cr_2O_3$ to be saturated through phase transformation. Chromia sealing began at the fine defect in coated microstructure, while larger pores were permeated later. The increase in concentration and treatment frequency of sealing solution resulted in the decrease of porosity of coating layer, while cracks occurred partially after the third treatment. After twice treatment of 10M $CrO_3$ solution, microhardness and breakdown voltage of $Al_2O_3$ coatings were found to increase by ${\fallingdotseq}$ 50% and ${\fallingdotseq}$ 390% respectively than without post-treatment.