• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.2
• /
• pp.69-74
• /
• 2015

Recently, energy harvesting technology is increasing due to the fossil fuel shortages. Energy harvesting is generating electrical energy from wasted energies as sunlight, wind, waves, pressure, and vibration etc. Energy harvesting is one of the alternatives of fossil fuel. One of the energy harvesting technologies, the piezoelectric energy harvesting has been actively studied. Piezoelectric generating uses a positive piezoelectric effect which produces electrical energy when mechanical vibration is applied to the piezoelectric device. Piezoelectric energy harvesting has an advantage in that it is relatively not affected by weather, area and place. Also, stable and sustainable energy generation is possible. However, the output power is relatively low, so in this paper, newly designed honeycomb shaped piezoelectric energy harvesting device for increasing a generating efficiency. The output characteristics of the piezoelectric harvesting device were analyzed according to the change of parameters by using the finite element method analysis program. One model which has high output voltage was selected and a prototype of the honeycomb shaped piezoelectric harvesting device was fabricated. Experimental results from the fabricated device were compared to the analyzed results. After the AC-DC converting, the power of one honeycomb shaped piezoelectric energy harvesting device was measured 2.3[mW] at road resistance 5.1[$K{\Omega}$]. And output power was increased the number of harvesting device when piezoelectric energy harvesting device were connected in series and parallel.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.1
• /
• pp.55-58
• /
• 2000

Germination of sweet and super sweet corn is lower than normal corn due to the higher sugar and lower starch contents of kernels. Sweet corn seeds are easily deteriorated in the field under the unfavorable condition, therefore it is important to identify the optimal harvesting time for seed production. This trial was conducted to investigate the responses of germination percentage of shrunken-2(sh2), brittle(bt), sugary(su), and sugary enhancer(se) hybrids in relation to harvesting dates. Eight hybrids of four different gene sweet corns were harvested at 15, 20, 25, 30, 35, 40, 45, and 50 days after silking(DAS). Germination test was performed using paper towel method. Mean germination percentages across eight hybrids showed the highest value at 45 DAS. There were significant differences among genes and within gene for germination. Shrunken-2 hybrid Mecca was higher than su hybrids for germination, indicating that sh2 would not be poorer than su Late harvesting beyond the optimal harvesting date might not be desirable because of more lodging and ear rots. Theoretical optimal harvesting date estimated from the regression equation was 40.9 DAS, however, practical date for harvesting would be a few days later than the estimated date if seedling vigor might be considered. Kernel dry weight per ear showed similar response to germination. Regression equation showed the highest kernel dry weight at 40.7 DAS. Significant correlations between kernel dry weight and germination were observed, impling that kernel dry matter accumulation would be an important factor for germination.

• Food Science and Preservation
• /
• v.30 no.5
• /
• pp.811-821
• /
• 2023

This study investigated the storability of onions according to manual and mechanical harvesting. Moreover, we simulated the onion-to-onion impact during the mechanical harvesting process and investigated the storability after artificially subjecting the onions to impact treatment. The onion harvesting methods included hand plucking + manual collection, digger + manual, and digger + mechanical collection. The maximum impact height during the mechanical harvesting process was 0.5 m. Immediately after harvesting, no significant difference in the bruise and wound rate among the harvesting methods was observed. Any increased bruise or wound rate because of mechanical harvesting was presumed to be influenced by soil conditions, such as the presence of gravel, and machine operation factors. Furthermore, the storability during the 8.5 months storage showed no significant difference according to the harvesting methods. In treatments by simulating the impacts during the mechanical harvesting process, the impact heights were 0.0 m (0.0 J), 0.25 m (0.86 J), 0.5 m (1.72 J), and 0.75 m (2.57 J), each performed once, and four times at the same position (3.43 J) and four times at different positions (3.43 J) at 0.25 m. Throughout all the treatments, there were no significant differences in the storability during the 8.5 months storage period.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.644-650
• /
• 2022

Aralia elata (Miq.) SEEM is a deciduous shrub that has attracted attention as a high-income forest product. To improve the efficiency of cultivation and increase income, productivity according to the pruning period and annual pruning after harvesting Aralia elata shoots was analyzed. The optimal time was determined by pruning five times at 2-week intervals from 6 days after shoot harvesting. To investigate the pruning effect, pruning was performed at 30 cm from the ground in the first year after planting. From the second year after planting, branches grown for 1 year were pruned to 10 cm, and the annual shoots and branches were compared. Thenumber of first pruned branches after 6 days was 1.3-2.1 times higher after shoot harvesting than at other times, and the shoot characteristics were 1.2-1.7 times better than those at other periods. The faster the pruning, the better the quality of the harvested shoots. Annual pruning produced high-quality shoots (approximately 1.5 cm in diameter and 16 cm in length) from the second year after planting, and it was possible to increase productivity by inducing generation of branches capable of harvesting shoots. Annual pruning also made it possible to maintain easy shoot harvesting at approximately150 cm. These results showed that it was efficient to perform Aralia elatapruning as early as approximately 6 days after shoot harvesting. Pruning enabled production ofuniform-quality shoots every year and increasedthe yield of the trees.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.6
• /
• pp.1224-1239
• /
• 2020

This study develops a wearable solar energy harvesting device that absorbs solar energy to generate and store power which can be used during outdoor activities by users even after dark. For this study, a prototype hat for outdoor activities at night was developed after the design of a solar energy harvesting generation, storage, and delivery system was designed that could store energy to light up LEDs. First, the main control board of the system was designed to integrate the charging function, the darkness detection circuit, the battery voltage sensing circuit, and the LED driving circuit in order to reduce bulkiness and minimize the connection structure. It was designed to increase convenience. Second, the system was designed as a wearable fashion product that connected each part with fiber bands and manufacturing it so as to be detachable from the hat. Third, charging and LED operation tests show that the battery is fully charged after 5 hours even in winter when the illuminance value is low. In addition, the LED operation experiment verified the effectiveness of a buffered system that could operate the LEDs for about 3 hours at night.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.93-96
• /
• 2000

The present study was performed to obtain the basic information about growth and quality related characteristics and optimum harvesting time for podedible pea which is a new crop in Korea but believed to have a great deal of potentials for both domestic and overseas markets. They can be consumed either as a fresh succulent vegetable or as tender green pods. The daily green pod yield of pod-edible peas started to increase from ten days after flowering and the maximum yield was recorded on 26 days after flowering. Ninety percent of pod yields could be harvested from 16 to 36 days after flowering. Mean green pod yield for the tested varieties was approximately 8.0 t/ha. Total vitamin C content of pod-edible peas showed continuously decreasing trends from five days after flowering. The highest sucrose content was obtained at ten days after flowering. The highest panel score based on sweetness, chewiness, and hardness for the processed green pods was shown at 10-15 days after flowering in all varieties tested, indicating that the optimum harvesting time for pod-edible peas was considered to be 10-15 days after flowering.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.261-266
• /
• 1984

To determine the optimum harvesting methods for high yield and quality, harvesting time were tested from 30 to 45 days after heading with five days intervals, using combine, binder and knap-sack type reaper (KSTR) in harvesting machines. Under the consideration of moisture contents of grain, operating time, grain loss, harvesting cost and quality, the optimum time of barley harvesting for mechanization was 35 to 40 days after heading. Combine and binder were recommended as the suitable machines for barley harvest in the operating efficiency and harvesting cost.

• Environmental Engineering Research
• /
• v.22 no.4
• /
• pp.356-362
• /
• 2017

This study investigates the use of methyl-esterified eggshell membranes (MESM) for the harvesting of microalgae species under various conditions. Eggshell membranes were esterified with HCl to impact polycationic characteristics. After methyl esterification, the negative surface charge property of eggshell membrane was changed from negative to positive for all pH values to improve microalgae sorption capacity. The harvesting efficiency of microalgae by MESM reached 78-99% for all pH ranges evaluated. In addition, a 150 mesh particle size and $10mg\;L^{-1}$ MESM dose were found to yield up to 98% microalgae harvesting. These results indicate that the high cationic charge of MESM strongly adsorbs the negatively-charged microalgae. MESM is biocompatible and can be applied to the harvest of microalgae.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.353-364
• /
• 2020

Recently in Korea, soybean harvesting has been delayed due to rainfall during the harvesting season, resulting in a reduction in yield and seed quality. This study was conducted to analyze the changes in yield and seed quality during delayed harvest with rainfall treatment using different harvesting methods, including field harvesting and polyethylene film covering after cutting fully-matured soybean plants (PE covering after cutting), with two major Korean soybean cultivars (Glycine max L), Pungsannamulkong and Daewonkong. The shattering rate of Pungsannamulkong, which is higher than that of Daewonkong, increased up to 41.8% when the harvest was delayed for 40 days without rainfall treatment by harvesting with PE covering after cutting. The weight of 100 seeds tended to decrease slightly as harvesting was delayed. When Daewonkong was harvested using the PE covering after cutting method with rainfall treatment, the yield decreased to the lowest level with a 0.8 kg ha^-1 daily reduction rate. Pungsannamulkong showed the lowest yield when harvested using PE covering after cutting without rainfall treatment with a 3.4 kg ha^-1 daily reduction rate. The infected seed rate increased according to the harvest delay in both cultivars, and significant differences were observed according to rainfall treatment and harvesting method. The germination rate was maintained above 95% even after 40 days of delayed harvest if there was no rainfall treatment. However, with rainfall treatment, the germination rate was significantly lowered as harvesting time was delayed. In the field harvesting with rainfall treatment, the germination rate decreased to 77.2% for Daewonkong and 76.5% for Pungsannamulkong after 40 days of harvest delay. For the 100-seed weight, effects of individual treatments and interactions between treatments were not observed. In contrast, the effect of interactions between treatments on the shattering rate was significant in both cultivars, indicating that the shattering rate had the greatest impact on the yield changes during delayed harvest.

• Archives of Plastic Surgery
• /
• v.33 no.4
• /
• pp.510-513
• /
• 2006

Purpose: The Rectus abdominis muscle free flap is utilized in various reconstruction surgeries due to easiness in harvesting, consistency of vascular pedicle and reduced donor site morbidity. But rarely, femoral nerve injury during rectus abdominis harvesting can be resulted. We report a case of femoral nerve injury after rectus muscle harvesting and discuss the injury mechanism with the follow-up process of this injury. Methods: To reconstruct the defect of middle cranial base after wide excision of cystic adenocarcinoma of the external ear, rectus muscle free flap was havested in usual manner. To achieve a long vessel, inferior epigastric artery was dissected to the dividing portion of femoral artery and cut. Results: One week after the surgery, the patient noted sensory decrease in the lower leg, weakness in muscle strength, and disabilities in extension of the knee joint resulting in immobilization. EMG and NCV results showed no response on stimulation of the femoral nerve of the left leg, due to the defects in femoral nerve superior to the inguinal ligament. With routine neurologic evaluations and physical therapy, on the 75th day after the operation, the patient showed improvement in pain, sensation and muscle strength, and was able to move with walking frame. In 6 months after the operation, recovery of the muscle strength of the knee joint was observed with normal flexion and extension movements. Conclusion: Rarely, during dissection of the inferior epigastric artery, injuries to the femoral nerve can be resulted, probably due to excessive traction or pressure from the blade of the traction device. Therefore, femoral nerve injury can be prevented by avoiding excessive traction during surgery.