• Reproductive and Developmental Biology
• /
• v.28 no.3
• /
• pp.181-185
• /
• 2004

This study was conducted to examine whether activation treatments, source of oocytes and culture conditions affect in vitro developmental ability of caprine oocytes. Mature Korean native goats were pretreated with intravaginal CIDR for 10 days. The goats were then treated with a single intramuscular injection of 1,000 IU PMSG on Day 8 or twice daily injection of a total of 70 mg FSH for 3 days from Day 8 of CIDR insertion for superovulation. All the goats were injected with 10 mg PGF/sub 2a/ on Day 8 and 400 IU hCG on Day 10 of CIDR. Oocytes were surgically collected by oviduct flushing(in vivo maturation) or direct follicle aspiration(in vitro maturation) through mid-ventral incision at 35 h after hCG injection. Fifteen to twenty oocytes were placed in TCM-199 medium containing 25 mM Hepes and hormones under mineral oil at 39℃ in a humudified atmosphere of 5% CO₂ in air for 22 to 24 h. After maturation, the oocytes were activated by electric stimulation or ionomycin + 6-DMAP. The activated oocytes were then cultured in M16, TCM-199 and mSOF media supplemented with proteins at 39℃ for 6 to 7 days. Activation treatments did not affect cleavage of the oocytes. The cleavage rates were 64.1% (41/64) in oocytes activated by electric stimulation and 76.5% (218/285) in oocytes activated by ionomycin + 6-DMAP. The proportion of development to blastocyst was 15.6% (34/218) in oocytes activated by ionomycin + 6-DMAP, but activation by electric stimulation did not support embryos developed beyond morula stage. There were no differences in the cleavage rates of activated oocytes experiencing in vivo (86.8%, 66/76) and in vitro maturation (69.0%, 127/184). However, the development rate to blastocyst stage was significantly (P<0.05) higher for oocytes matured in vivo (50.0%, 33/66) compared to in vitro (0.8%, 1/127). Culture conditions did not affect the cleavage of -activated oocytes. The cleavage rates were 51.6% (49/95) in M16, 64.3% (18/28) in TCM-199 and 81.0% (145/179) in mSOF, respectively. By contrast, the development rate of activated oocytes to stage was greater (P<0.05) for oocytes cultured in mSOF medium (23.4%, 34/145) than in M16 or TCM-199 (0.0%). Our results suggest that source of oocytes and culture conditions are major factors affecting in vitro development of caprine parthenogenetic oocytes.

• Journal of the Korean Society of Food Culture
• /
• v.6 no.4
• /
• pp.421-432
• /
• 1991

This study was conducted to investigate the intake of a kind of Gom-Tang (Beef soup made with internal organs and bone), which is the Korean traditional food, and factors affecting the eating behavior of customers. Two hundred male customers of a H Korean Restaurant specialized in Gom-Tang, which is a well-known restaurant in Seoul, were surveyed from June 26 to 29, 1990. The results were shown as follows. (1) ${\ulcorner}$Frequency of intake${\lrcorner}$ and ${\ulcorner}$preference${\lrcorner}$ were very high. Those who took a kind of Gom-Tang ${\ulcorner}$more than once a week${\lrcorner}$ were 66.5% of the subjects. Those who evaluated ${\ulcorner}$good${\lrcorner}$ for the taste and flavor were 86.5% and 59.0% of the subjects, respectively. (2) The reasons why they chose a kind of Gom-Tang from among many Korean traditional foods were ${\ulcorner}$preference${\lrcorner}$ and ${\ulcorner}$phygiological condition${\lrcorner}$ in ${\ulcorner}$high frequency of intake${\lrcorner}$ group. ${\ulcorner}$Phygiological condition${\lrcorner}$ was more critical factor than ${\ulcorner}$preference${\lrcorner}$ in ${\ulcorner}$low frequency of intake${\lrcorner}$ group. (3) The effect of the intake of a kind of Gom-Tang on health was evaluated as ${\ulcorner}$healthy${\lrcorner}$ (80.5%). ${\ulcorner}$No effect${\lrcorner}$ and ${\ulcorner}$harmful${\lrcorner}$ were 30.5% and 6.5%, respectively. (4) ${\ulcorner}$High frequency of intake${\lrcorner}$ group, mainly more than 50 years of age, had a high ${\ulcorner}$preference${\lrcorner}$ and ${\ulcorner}$food knowledge${\lrcorner}$ as well as positive ${\ulcorner}$eating behavior${\lrcorner}$ and ${\ulcorner}$healthy state${\lrcorner}$, ${\ulcorner}$Middle frequency of intake${\lrcorner}$ group, mainly the forties, had a high ${\ulcorner}$preference${\lrcorner}$, but had less positive ${\ulcorner}$eating behavior${\lrcorner}$ than ${\ulcorner}$high frequency of intake${\lrcorner}$ group. ${\ulcorner}$Low frequency of intake${\lrcorner}$ group, mainly the twenties and thirties, had a medial ${\ulcorner}$preference${\lrcorner}$. They took a kind of Gom-Tang for reasons of ${\ulcorner}$on the recommendation of friends${\lrcorner}$ better than ${\ulcorner}$preference${\lrcorner}$. Foregoing results showed that ${\ulcorner}$a kind of Gom-Tang${\lrcorner}$ was a typical food recognized as ${\ulcorner}$healthy${\lrcorner}$ as well as ${\ulcorner}$delicious${\lrcorner}$. This may suggest that ${\ulcorner}$a kind of Gom-Tang${\lrcorner}$ is a candidate for the effective food on nutritional education.

• Journal of Intelligence and Information Systems
• /
• v.24 no.1
• /
• pp.75-100
• /
• 2018

Mobile devices have become an important channel for news content usage in our daily life. However, online news content readers' resistance to online news monetization is more serious than other digital content businesses, such as webtoons, music sources, videos, and games. Since major portal sites distribute online news content free of charge to increase their traffics, customers have been accustomed to free news content; hence this makes online news providers more difficult to switch their policies on business models (i.e., monetization policy). As a result, most online news providers are highly dependent on the advertising business model, which can lead to increasing number of false, exaggerated, or sensational advertisements inside the news website to maximize their advertising revenue. To reduce this advertising dependencies, many online news providers had attempted to switch their 'free' readers to 'paid' users, but most of them failed. However, recently, some online news media have been successfully applying the Pay-What-You-Want (PWYW) payment model, which allows readers to voluntarily pay fees for their favorite news content. These successful cases shed some lights to the managers of online news content provider regarding that the PWYW model can serve as an alternative business model. In this study, therefore, we collected 379 online news articles from Ohmynews.com that has been successfully employing the PWYW model, and analyzed the comparative importance of systematic attributes of online news content on readers' voluntary payment. More specifically, we derived the six systematic attributes (i.e., Type of Article Title, Image Stimulation, Article Readability, Article Type, Dominant Emotion, and Article-Image Similarity) and three or four levels within each attribute based on previous studies. Then, we conducted content analysis to measure five attributes except Article Readability attribute, measured by Flesch readability score. Before conducting main content analysis, the face reliabilities of chosen attributes were measured by three doctoral level researchers with 37 sample articles, and inter-coder reliabilities of the three coders were verified. Then, the main content analysis was conducted for two months from March 2017 with 379 online news articles. All 379 articles were reviewed by the same three coders, and 65 articles that showed inconsistency among coders were excluded before employing conjoint analysis. Finally, we examined the comparative importance of those six systematic attributes (Study 1), and levels within each of the six attributes (Study 2) through conjoint analysis with 314 online news articles. From the results of conjoint analysis, we found that Article Readability, Article-Image Similarity, and Type of Article Title are the most significant factors affecting online news readers' voluntary payment. First, it can be interpreted that if the level of readability of an online news article is in line with the readers' level of readership, the readers will voluntarily pay more. Second, the similarity between the content of the article and the image within it enables the readers to increase the information acceptance and to transmit the message of the article more effectively. Third, readers expect that the article title would reveal the content of the article, and the expectation influences the understanding and satisfaction of the article. Therefore, it is necessary to write an article with an appropriate readability level, and use images and title well matched with the content to make readers voluntarily pay more. We also examined the comparative importance of levels within each attribute in more details. Based on findings of two studies, two major and nine minor propositions are suggested for future empirical research. This study has academic implications in that it is one of the first studies applying both content analysis and conjoint analysis together to examine readers' voluntary payment behavior, rather than their intention to pay. In addition, online news content creators, providers, and managers could find some practical insights from this research in terms of how they should produce news content to make readers voluntarily pay more for their online news content.

• Journal of agricultural medicine and community health
• /
• v.24 no.2
• /
• pp.269-289
• /
• 1999

This study was conducted to examine the relationship among health concern, health practice and ADL of elderly staying at home in a rural community and their affecting factors. Data were collected through direct interviews made with 480 old people aged more than sixty-five from November 15, 1998 to December 20, 1998. Out of 189 male and 291 female, the high-level group that showed high health concern accounted for 44.4%, the medium-level group for 13.1%, and the low-level group for 42.5%, in the health practice, the high-level group accounted for 3.8%, the medium-level group for 18.8%, and the low-level group for 77.5%. In the self-rated health status, the high-level group accounted for 29.0%, the medium-level group for 31.0%, and the low-level group for 40.0%, and in the ADL, the high ADL group accounted for 91.5%, and the low-level ADL group for 8.5%. The result of the chi-square test showed that for male, there was a significant relation between the health concern and the health practice index score. In the relation between the health practice index score and the self-rated health status, there was significant positive relationship between health practice index and self-rated health status, and in the relation between the health practice Index score and the ADL, old people with higher health practices showed good ADL(but not significant). Old people with good ADL also showed good self-rated health status. In the multiple regression analysis where the health practice was used as a dependent variable, the health concern was added to the sociodemographic variables as an independent variables, a formula was formed for male old people only and ones with high concern in health showed good health practice. In the multiple logistic regression analysis where the sociodemographic variables to which the health practices was added were used as an independent variable and the ADL as a dependent variable, the ADL appeared to be not good if for male old people the living costs were born by their sons and daughters and as for female old people their ages increased, but it was good if old people had sources of health information such as hospitals or health centers. The self-rated health status was worse, for male old people, if they had short living costs or diseases and for female old people, if they had spouses, living costs born by their sons and daughters or diseases, but it was better, for male old people, if they had periodical gatherings or carried out health practices a lot, and for female old people, if they had sources of health information such as hospitals or health centers or carried out health practices a lot. In view of the results stated above, the higher the old people had health concern, the more they carried out health practices, and the more they carried out health practices, the better they had ADL and self-rated health status that served as the level of health. Further, the better ADL, the better self-rated health status.

• Journal of Gastric Cancer
• /
• v.5 no.2
• /
• pp.89-94
• /
• 2005

Purpose: Early gastric cancer (EGC) has an excellent prognosis compared to advanced gastric cancer. The 5-year survival rate for EGC now exceeds $90\%$, and EGC is recognized as a curable malignancy. The important prognostic factor in EGC is the status of lymph-node metastasis. Despite conserving surgery being suggested for EGC at present, it is of vital importance to select a surgical method appropriate to each individual case. This retrospective study was undertaken to clarify clinicopathologic features and factors related to lymph-node metastasis in submucosal gastric cancer in order to determine an appropriate therapy. Materials and Methods: This study analyzed the clinicopathologic features for 279 patients with a submucosal gastric carcinoma (Group I) and compared with those of patients with mucosal (Group II) or muscularis proprial gastric carcinoma (Group III). All patients were operated on from 1981 to 1999 at Chonnam University Hospital. There were no statistically significant differences among the groups with respect to age, gender, tumor location, hepatic metastasis, or peritoneal dissemination. Results: Positive lymph node metastasis was found in 47 ($16.8\%$) of the 279 patients with a submucosal gastric carcinoma. The incidence of lymph-node metastasis was significantly higher in patients with a submucosal gastric carcinoma than in patients with a mucosal gastric carcinoma ($16.8\%\;vs.\;3.9\%\;$; P<0.01). Therefore, depth of invasion was a significant factor affecting in lymph-node metastasis. The 5-year survival rates were $88.6\%$ for patients in Group I, $95.2\%$ for patients in Group II, and $72.7\%$ for patients in Group III (P<0.01 for Group I vs. Group II; Group I vs. Group III). In patients with a submucosal gastric carcinoma, the survival rate with positive lymph nodes was significantly poorer than that of patients without lymph-node metastasis ($87.3\%\;vs.\;94.2\%$; P<0.01). Conclusion: Gastrectomy with D2 lymph node dissection is an appropriate operative procedure for patients with a submucosal gastric carcinoma.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.147-157
• /
• 1973

I. The effect of excessive soil moisture(at the time of germination) on germination of barley and crop damage of herbicides was investigated. Machete(Butachlor) and TOK(Nitrofen) were treated, respectively, at the rate of 150g ai/10a on each pot whose different soil moisture content was controlled by suppling 30, 40, 50 and 60ml of water per 100gr of air-dried soil, respectively. The results are summarized as follows: 1. Excessive soil moisture beyond field moisture capacity caused great inhibition, from 20 to 100%, of the germination of barley even at untreated pots(check pots). Also, further development of root and growth of barley were greatly inhibited even though the seeds germinated. 2. The same tendency in inhibition of germination and growth as at untreated pots was observed at treated pots, too. As a whole, however, the damage were heavier at treated pots. II. Wanju naked spring barley was seeded on four different soils and covered with soil to a depth of 1 em, and then Machete, TOK, Saturn and HE-314 were treated at the rate of 180, 150 and 200, 150, and 250g ai/10a, respectively, and the effect of soil texture on crop damage of the herbicides was investigated. The results are summarized as follows: 1. Machete(emulsion and granule, at 180g ai/10a) The degree of crop damage was quite different from one soil texture to another: while almost no crop damage was observed on a clay loam soil regardless of the type of formulation, the damage became heavier as the soil texture became sandier as sandy clay loam, volcanic ash loam and sandy loam, and great inhibition of growth was observed on sandy loam soil. In general heavier damage was caused by the application of emulsion than by granular formulation. 2. TOK(Wettable powder, at 150, 250g ai/l0a) Almost the same tendency as in the application of Machete was observed, and the damage became heavier as the application rate increased. 3. Saturn(at l50g ai/l0a) No great difference in crop damage among soil textures was observed. 4. HE-3l4(at 250g ai/l0a) Almost no difference in crop damage among soil textures was observed at this rate of 250g ai/l0a. III. To study a difference of crop damage on soil covering depth(4 levels), 9 herbicides(TOK, MO, HE-3l4, Machete, Saturn, Simetryne, Simazine, Gesaran, Lorox) were treated on the pots with two different soils, and the effect of soil covering depth on crop damage of the herbicides was investigated. The results obtained in this experiment are summarized as follows: Light Clay Soil 1. The growth of barley in relation to depth of soil covering at check pots followed the order vigorous to weak; lcm>1.5cm>0.5cm>0cm. And in case of 0 and 0.5cm covering the growth of barley was very poor. 2. The damage at 0 and 0.5cm covering at treated pots was very severe, but Saturn, Machete, MO and TOK at 100 to l50g ai/l0a, respectively and He-3l4 at 250 to 375g ai/l0a were relatively safe to barley at the depths of lcm and above. 3. Simazine, Lorox and Simetryne caused slight damage even at 1.5cm covering. Sandy Loam Soil The growth of barley in relation to depth of soil covering at untreated pots followed the order, from vigorous to weak; 1.5cm 0.5cm 3cm 5cm. While MO was safe to barley at 1.5cm covering, for other chemicals more than 3cm covering was require for safe use. Machete and Saturn at 100g ai/l0a, and HE-3l4 at 250g ai/l0a was relatively safe at more than 3cm covering. Simazine, Lorox, Simetryne and Gesaran were unsafe on sandy soil regardless of covering depth.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.6
• /
• pp.916-924
• /
• 1996

Bacground : Percutaneous needle aspiration biopsy (PCNA) is one of the most frequently used diagnostic methcxJs for intrathoracic lesions. Previous studies have reponed wide range of diagnostic yield from 28 to 98%. However, diagnostic yield has been increased by accumulation of experience, improvement of needle and the image guiding systems. We analysed the results of PCNA performed for one year to evaluate the diagnostic yield, the rate and severity of complications and factors affecting the diagnostic yield. Method : 287 PCNAs undergone in 236 patients from January, 1994 to December, 1994 were analysed retrospectively. The intrathoracic lesions was targeted and aspirated with 21 - 23 G Chiba needle under fluoroscopic guiding system. Occasionally, 19 - 20 G Biopsy gun was used for core tissue specimen. The specimen was requested for microbiologic, cytologic and histopathologic examination in the case of obtained core tissue. Diagnostic yields and complication rate of benign and malignant lesions were ca1culaled based on patients' chans. The comparison for the diagnostic yields according to size and shape of the lesions was analysed with chi square test (p<0.05). Results : There are 19.9% of consolidative lesion and 80.1% of nodular or mass lesion, and the lesion is located at the right upper lobe in 26.3% of cases, the right middle lobe in 6.4%, the right lower lobe 21.2%, the left upper lobe in 16.8%, the left lower lobe in 10.6%, and mediastinum in 1.3%. The lesion distributed over 2 lobes is as many as 17.4% of cases. There are 74 patients with benign lesions, 142 patients with malignant lesions in final diagnosis and confirmative diagnosis was not made in 22 patients despite of all available diagnostic methods. 2 patients have lung cancer and pulmonary tuberculosis concomittantly. Experience with 236 patients showed that PCNA can diagnose benign lesions in 62.2% (42 patients) of patients with such lesions and malignant lesions in 82.4% (117 patients) of patients. For the patients in whom the first PCNA failed to make diagnosis, the procedure was repeated and the cumulative diagnostic yield was increased as 44.6%, 60.8%, 62.2% in benign lesions and as 73.4%, 81.7%, 82.4% in malignant lesions through serial PCNA. Thoracotomy was performed in 9 patients with benign lesions and in 43 patients with malignant lesions. PCNA and thoracotomy showed the same pathologic result in 44.4% (4 patients) of benign lesions and 58.1% (25 patients) of malignant lesions. Thoracotomy confirmed 4 patients with malignat lesions against benign result of PCNA and 2 patients with benign lesions against malignant result of PCNA. There are 1.0% (3 cases) of hemoptysis, 19.2% (55 cases) of blood tinged sputum, 12.5% (36 cases) of pneumothorax and 1.0% (3 cases) of fever through 287 times of PCNA. Hemoptysis and blood tinged sputum didn't need therapy. 8 cases of pneumothorax needed insertion of classical chest tube or pig-tail catheter. Fever subsided within 48 hours in all cases. There was no difference between size and shape of lesion with diagnostic yield. Conclusion: PCNA shows relatively high diagnostic yield and mild degree complications but the accuracy of histologic diagnosis has to be improved.

• Journal of Intelligence and Information Systems
• /
• v.20 no.2
• /
• pp.137-148
• /
• 2014

Recommender system has become one of the most important technologies in e-commerce in these days. The ultimate reason to shop online, for many consumers, is to reduce the efforts for information search and purchase. Recommender system is a key technology to serve these needs. Many of the past studies about recommender systems have been devoted to developing and improving recommendation algorithms and collaborative filtering (CF) is known to be the most successful one. Despite its success, however, CF has several shortcomings such as cold-start, sparsity, gray sheep problems. In order to be able to generate recommendations, ordinary CF algorithms require evaluations or preference information directly from users. For new users who do not have any evaluations or preference information, therefore, CF cannot come up with recommendations (Cold-star problem). As the numbers of products and customers increase, the scale of the data increases exponentially and most of the data cells are empty. This sparse dataset makes computation for recommendation extremely hard (Sparsity problem). Since CF is based on the assumption that there are groups of users sharing common preferences or tastes, CF becomes inaccurate if there are many users with rare and unique tastes (Gray sheep problem). This study proposes a new algorithm that utilizes Social Network Analysis (SNA) techniques to resolve the gray sheep problem. We utilize 'degree centrality' in SNA to identify users with unique preferences (gray sheep). Degree centrality in SNA refers to the number of direct links to and from a node. In a network of users who are connected through common preferences or tastes, those with unique tastes have fewer links to other users (nodes) and they are isolated from other users. Therefore, gray sheep can be identified by calculating degree centrality of each node. We divide the dataset into two, gray sheep and others, based on the degree centrality of the users. Then, different similarity measures and recommendation methods are applied to these two datasets. More detail algorithm is as follows: Step 1: Convert the initial data which is a two-mode network (user to item) into an one-mode network (user to user). Step 2: Calculate degree centrality of each node and separate those nodes having degree centrality values lower than the pre-set threshold. The threshold value is determined by simulations such that the accuracy of CF for the remaining dataset is maximized. Step 3: Ordinary CF algorithm is applied to the remaining dataset. Step 4: Since the separated dataset consist of users with unique tastes, an ordinary CF algorithm cannot generate recommendations for them. A 'popular item' method is used to generate recommendations for these users. The F measures of the two datasets are weighted by the numbers of nodes and summed to be used as the final performance metric. In order to test performance improvement by this new algorithm, an empirical study was conducted using a publically available dataset - the MovieLens data by GroupLens research team. We used 100,000 evaluations by 943 users on 1,682 movies. The proposed algorithm was compared with an ordinary CF algorithm utilizing 'Best-N-neighbors' and 'Cosine' similarity method. The empirical results show that F measure was improved about 11% on average when the proposed algorithm was used