• 한국입자에어로졸학회지
• /
• 제6권2호
• /
• pp.61-67
• /
• 2010

In this paper, we describe a new method to form polymer thin films, in which carbon nanotubes (CNTs) are homogeneously distributed so that they can strengthen the mechanical property of resulting polymer film. To do so, we first homogeneously mixed CNTs with polymer in a DMF solvent. With the assistance of ultrasonic nebulizer, the polymer/CNT solution was then aerosolized into micro-sized droplets and finally turned into solidified polymer/CNT composite particles by gas-phase drying process. As the results of SEM and TEM analysis, CNTs were found to be homogeneously immobilized in the polymer matrix particles due to rapid drying process in the gas phase. For comparison purpose, (i) the polymer/CNTs composite particles prepared by aerosol processing method and (ii) polymer/CNTs sheets prepared by simple solution-evaporation method were employed to form polymer/CNTs composite thin films using a hot press. As the result, the aerosol processing of composite particles was found to be a much more effective method to form homogeneously distributed-CNTs in the polymer matrix thin film.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.409-414
• /
• 1998

To examine the detectability of the aerosol and/or Yellow dust from China crossing over the Yellow sea, three works carried out as follows , Firstly, a comparison was made of the visible(VIS), water vapor(WV), and Infrared(IR) images of the GMS-5 and NOAA/AVHRR on the cases of yellow sand event over Korea. Secondly, the spectral radiance and reflectance(%) was observed during the yellow sand phenomena on April, 1998 in Seoul using the GER-2600 spectroradiometer, which observed the reflected radiance from 350 to 2500 nm in the atmosphere. We selected the optimum wavelength for detecting of the yellow sand from this observation, considering the effects of atmospheric absorption. Finally, the atmospheric radiance emerging from the LOWTRAN-7 radiative transfer model was simulated with and without yellow sand, where we used the estimated aerosol column optical depth ($\tau$ 673 nm) in the Meteorological Research Institute and the d'Almeida's statistical atmospheric aerosol radiative characteristics. The image analysis showed that it was very difficult to detect the yellow sand region only by the image processing because the albedo characteristics of the sand vary irregularly according to the density, size, components and depth of the yellow sand clouds. We found that the 670-680 nm band was useful to simulate aerosol characteristics considering the absorption band from the radiance observation. We are now processing the simulation of atmospheric radiance distribution in the range of 400-900 nm. The purpose of this study is to present the preliminary results of the aerosol and/or Yellow dust detectability using the Ocean Scanning Multispectral Imager(OSMI), which will be mounted on KOMPSAT-1 as the ocean color monitoring sensor with the range of 400-900 nm wavelength.

• 대한원격탐사학회지
• /
• 제34권1호
• /
• pp.127-139
• /
• 2018

The GOCI atmospheric correction overland surfaces is essential for the time-series analysis of terrestrial environments with the very high temporal resolution. We develop an operational GOCI atmospheric correction method over land surfaces, which is rather different from the one developed for ocean surface. The GOCI atmospheric correction method basically reduces gases absorption and Rayleigh and aerosol scatterings and to derive surface reflectance from at-sensor radiance. We use the 6S radiative transfer model that requires several input parameters to calculate surface reflectance. In the sensitivity analysis, aerosol optical thickness was the most influential element among other input parameters including atmospheric model, terrain elevation, and aerosol type. To account for the highly variable nature of aerosol within the GOCI target area in northeast Asia, we generate the spatio-temporal aerosol maps using AERONET data for the aerosol correction. For a fast processing, the GOCI atmospheric correction method uses the pre-calculated look up table that directly converts at-sensor radiance to surface reflectance. The atmospheric correction method was validated by comparing with in-situ spectral measurements and MODIS reflectance products. The GOCI surface reflectance showed very similar magnitude and temporal patterns with the in-situ measurements and the MODIS reflectance. The GOCI surface reflectance was slightly higher than the in-situ measurement and MODIS reflectance by 0.01 to 0.06, which might be due to the different viewing angles. Anisotropic effect in the GOCI hourly reflectance needs to be further normalized during the following cloud-free compositing.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.316-319
• /
• 2006

Monthly-mean aerosol parameters derived from the 1998-2004 SeaWiFS observations over East Asian waters are analyzed. SeaWiFS GAC Level 1 data covering the Northeast Asian area are collected and processed by the standard atmospheric correction algorithm released by the SeaWiFS Project to produce daily aerosol optical thickness (AOT) and ${{\AA}}ngstr{\ddot{o}}m$ exponent imageries. Monthly mean AOT and ${{\AA}}ngstr{\ddot{o}}m$ exponent values are extracted from the daily composite images for six study areas chosen from the surrounding waters of Japan. A slight increasing trend of ${{\AA}}ngstr{\ddot{o}}m$ exponent is found and interpreted as about 4-5% increase in submicron fraction of aerosol optical thickness at 550nm. Two cloud screening methods, including the standard cloud masking method of SeaWiFS and the one based on the local variance method, are applied to the SeaWiFS data processing, in an attempt to inspect the influence to the observed statistical uptrend which probably induced by different cloud mask algorithms. The variability comes from the different cloud masking algorithms are discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.168-173
• /
• 2000

Flame aerosol synthesis technology refers to the formation of fine particles from gases in flame and is widely used in practical materials processing. In this paper, an experimental investigation was performed on growth of the silica particles that were generated in $H_2/O_2$ Diffusion Flame by the direct injection or TEOS using Electro-spraying method. in this flame aerosol synthesis, four main parameters or nos interaction (flame temperature, residence time or particle in flame, TEOS flow rate, applied voltage) for particle generation and growth was investigated along the axial direction above the burner. A fairly monodisperse non-aggregated particles were successfully obtained.

• 대한원격탐사학회지
• /
• 제24권6호
• /
• pp.559-569
• /
• 2008

세계 최초의 정지 궤도 해양관측 센서인 Geostationary Ocean Color Imager (COMS/GOCI)가 측정하는 가시광선 영역의 파장대 ($0.4-0.9{\mu}m$)는 대기 구성성분(기체상 또는 입자상)에 의하여 영향을 받기 때문에 이에 대한 보정이 필요하다. 특히, 대기중에 존재하는 미세입자인 에어러솔은 그 물리 화학적 특성의 다양함으로 인하여 태양광과 반응하는 과정이 상당히 복잡하게 나타나므로, 정확한 해양 관측을 위하여 대기 에어러솔과 복사 과정의 상호작용에 대한 정확한 이해가 필요하다. 본 연구에서는 알려진 대기 에어 러솔 특성 자료를 이용하여 에어 러솔의 물리 적, 광학적 특성을 분석하였다. 여기서 얻어진 에어러솔 특성 값들은 복사전달 모델을 이용하여 다양한 환경 조건하(에어러솔의 종류와 양)에서 위성센서가 측정하는 이론적인 복사량과 에어러솔의 관계를 분석하는데 사용되었다. 복사전달모델 분석결과, 위성 자료 분석에서 잘못된 에어러솔의 광학 특성값의 사용으로 인한 오차는 에어러솔 광학 두께($\tau$)가 0.2보다 작은 범위에서는 비교적 작은 값을 나타내나 0.2보다 크게 되는 경우 지속적으로 증가하였다. 추가로 위성 관측값과 복사전달 모델에 의하여 계산된 값의 차이가 최소인 에어러솔 타입의 광학 특성값을 이용하여 ($\tau$)와 ${\aa}ngstr{\ddot{o}}m$ exponent 를 도출한 결과는 기존의 표준 알고리즘보다는 지상관측자료와의 비교적 잘 일치하고 있는 것으로 나타났다. 따라서 위성 관측자료에서 에어러솔 분석함에 있어서 에어러솔 타입에 따른 광학적 특성값의 중요성은 매우 크다고 할 수 있다. 이러한 결과들은 궁극적으로 향후 발사될 COMS/GOCI의 관측 자료를 이용한 대기 에어러솔 분석이나 대기 효과 보정에 있어서 도움이 될 것이다.

• 대기
• /
• 제14권2호
• /
• pp.11-22
• /
• 2004

A technique on atmospheric correction algorithm to the multi-band reflectance of Landsat TM imagery has been developed using an atmospheric radiation transfer model for eliminating the atmospheric and surface diffusion effects. Despite the fact that the technique of satellite image processing has been continually developed, there is still a difference between the radiance value registered by satellite borne detector and the true value registered at the ground surface. Such difference is caused by atmospheric attenuations of radiance energy transfer process which is mostly associated with the presence of aerosol particles in atmospheric suspension and surface irradiance characteristics. The atmospheric reflectance depend on atmospheric optical depth and aerosol concentration, and closely related to geographical and environmental surface characteristics. Therefore, when the effects of surface diffuse and aerosol reflectance are eliminated from the satellite image, it is actually corrected from atmospheric optical conditions. The objective of this study is to develop an algorithm for making atmospheric correction in satellite image. The study is processed with the correction function which is developed for eliminating the effects of atmospheric path scattering and surface adjacent pixel spectral reflectance within an atmospheric radiation model. The diffused radiance of adjacent pixel in the image obtained from accounting the average reflectance in the $7{\times}7$ neighbourhood pixels and using the land cover classification. The atmospheric correction functions are provided by a radiation transfer model of LOWTRAN 7 based on the actual atmospheric soundings over the Korean atmospheric complexity. The model produce the upward radiances of satellite spectral image for a given surface reflectance and aerosol optical thickness.

• 한국입자에어로졸학회지
• /
• 제10권3호
• /
• pp.99-108
• /
• 2014

Liquid filtration by membrane filters is essential for the preparation of ultrapure water in semiconductor manufacturing processes. The separation of submicrometer particles suspended in ultrapure water with a laminated fibrous membrane filter was studied numerically and experimentally in the present work. We found that an electrical double layer around a single fiber expanded to a large extent at a low ion concentration, as in ultrapure water, and deformed toward the upstream of the fiber with increasing filtration velocity. Since an increase in the electrical double-layer thickness leads to a decrease in the electrical potential gradient, particles with the same polarity as the fiber approach the fiber more easily and are captured at a high filtration velocity. Experimental results also confirmed that the collection efficiency of polystyrene latex(PSL) particles through a PTFE filter became higher as the filtration velocity increased.

• 한국입자에어로졸학회지
• /
• 제6권3호
• /
• pp.131-138
• /
• 2010

Flexible electronics are the electronics on flexible substrates such as a plastic, fabric or paper, so that they can be folded or attached on any curved surfaces. They are currently recognized as one of the most innovating future technologies especially in the area of portable electronics. The conventional vacuum deposition and photolithographic patterning methods are well developed for inorganic microelectronics. However, flexible polymer substrates are generally chemically incompatible with resists, etchants and developers and high temperature processes used in conventional integrated circuit processing. Additionally, conventional processes are time consuming, very expensive and not environmentally friendly. Therefore, there are strong needs for new materials and a novel processing scheme to realize flexible electronics. This paper introduces current research trends for flexible electronics based on (a) nanoparticles, and (b) novel processing schemes: nanomaterial based direct patterning methods to remove any conventional vacuum deposition and photolithography processes. Among the several unique nanomaterial characteristics, dramatic melting temperature depression (Tm, 3nm particle~$150^{\circ}C$) and strong light absorption can be exploited to reduce the processing temperature and to enhance the resolution. This opens a possibility of developing a cost effective, low temperature, high resolution and environmentally friendly approach in the high performance flexible electronics fabrication area.

• 대한원격탐사학회지
• /
• 제32권2호
• /
• pp.119-131
• /
• 2016

한반도 에어로졸 라이다 관측 네트워크(Korea Aerosol Lidar Observation Network; KALION)의 라이다 관측자료 처리 및 실시간 표출을 위한 표준 알고리즘을 개발하였다. KALION 표준 알고리즘은 라이다 관측으로부터 얻어진 후방산란강도와 편광소멸도 자료를 이용하여 (1) 에어로졸과 구름 구분, (2) 에어로졸 유형 구분, (3) 에어로졸 소산계수 그리고 (4) 에어로졸 질량농도를 산출하는 단계로 구성이 되어 있다. 에어로졸의 유형은 후방산란강도와 편광소멸도 자료에 근거하여, (대륙 기원) 청정기단 에어로졸(clean continental aerosol), 황사(dust aerosol) 그리고 오염 입자(polluted continental/urban pollution aerosol)로 구별된다. 에어로졸 소산계수에 필요한 라이다 상수는 약 9년간의 라이다와 스카이 라디오미터 자료로부터 도출된 63.31 sr을, 에어로졸 질량소산효율은 약 9년간의 라이다와 기상청 Particulate Matter($PM_{10}$) 질량농도 자료를 이용하여 도출된 $3.36m^2\;g^{-1}$ (황사는 $1.39m^2\;g^{-1}$)을 적용한다. 2015년 3월 28일부터 30일까지 라이다 관측 사례(서울 관악)에서 KALION 표준 알고리즘을 통해 산출된 에어로졸 유형 구분, 특히 황사 판별 결과는 기상청의 황사 보고와 잘 일치하였으며, 2006년 6월부터 약 9년 동안의 라이다 관측자료로부터 산출된 에어로졸 질량농도 역시 지상 $PM_{10}$ 농도와 약 $3{\mu}g\;m^{-3}$ 내에서 잘 일치하였다. 향후 에어로졸의 유형에 따른 서로 다른 라이다 상수 및 에어로졸 질량소산효율 적용 알고리즘, 빙정 구름(ice cloud)과 물방울 구름(water droplet cloud) 구분 알고리즘, 그리고 운저 고도와 혼합고 판별 알고리즘을 개발할 계획에 있다.