• 제목/요약/키워드: Aerosol particle

검색결과 667건 처리시간 0.024초

한반도 서부유입권역에서 대기 중 에어로졸 성분의 화학적 특성 연구 I. PM 농도 및 화학 성분 특성 (A Study on Chemical Characteristics of Aerosol Composition at West Inflow Regions in the Korean Peninsula I. Characteristics of PM Concentration and Chemical Components)

  • 최진수;김정호;이태형;최용주;박태현;오준;박진수;안준영;전하은;구윤서;김신도;홍유덕;홍지형
    • 한국대기환경학회지
    • /
    • 제32권5호
    • /
    • pp.469-484
    • /
    • 2016
  • HR-ToF-AMS was applied for a seasonal and size-distributional measurements for inorganic ($SO{_4}^{2-}$, $NO_3{^-}$, $NH_4{^+}$, $Cl^-$) and organic components in Baegryung Island Super Site. The average concentration of $PM_{1.0}$ remarks $12.9{\mu}g/m^3$ while $14.5{\mu}g/m^3$ in Spring time, $14.2{\mu}g/m^3$ in Winter, $13.1{\mu}g/m^3$ in Summer and $9.86{\mu}g/m^3$ in Autumn. The mass of measured $PM_{1.0}$ shows 54.6% of $PM_{2.5}$ which is similar to those of Beijing and Lanzhou, China. The highest portion of Chemical composition is $SO{_4}^{2-}$ marking 41.0%, 31.8% by organics, 13.5% by $NH_4{^+}$, 12.8% by $NO_3{^-}$ and 1% by $Cl^-$. In every seasons, except winter, $SO{_4}^{2-}$ remarks the highest level, organic components take place the highest in winter time. The size-distribution of $PM_{1.0}$ components scattered at accumulation mode of 200 nm~800 nm which means the influence of primary emission is low. In case of air stream from the industrialized area of Sandung, Shanghai, China, the concentrations of such components were distributed a bit higher.

Analytical Methods of Levoglucosan, a Tracer for Cellulose in Biomass Burning, by Four Different Techniques

  • Bae, Min-Suk;Lee, Ji-Yi;Kim, Yong-Pyo;Oak, Min-Ho;Shin, Ju-Seon;Lee, Kwang-Yul;Lee, Hyun-Hee;Lee, Sun-Young;Kim, Young-Joon
    • Asian Journal of Atmospheric Environment
    • /
    • 제6권1호
    • /
    • pp.53-66
    • /
    • 2012
  • A comparison of analytical approaches for Levoglucosan ($C_6H_{10}O_5$, commonly formed from the pyrolysis of carbohydrates such as cellulose) and used for a molecular marker in biomass burning is made between the four different analytical systems. 1) Spectrothermography technique as the evaluation of thermograms of carbon using Elemental Carbon & Organic Carbon Analyzer, 2) mass spectrometry technique using Gas Chromatography/mass spectrometer (GC/MS), 3) Aerosol Mass Spectrometer (AMS) for the identification of the particle size distribution and chemical composition, and 4) two dimensional Gas Chromatography with Time of Flight mass spectrometry (GC${\times}$GC-TOFMS) for defining the signature of Levoglucosan in terms of chemical analytical process. First, a Spectrothermography, which is defined as the graphical representation of the carbon, can be measured as a function of temperature during the thermal separation process and spectrothermographic analysis. GC/MS can detect mass fragment ions of Levoglucosan characterized by its base peak at m/z 60, 73 in mass fragment-grams by methylation and m/z 217, 204 by trimethylsilylderivatives (TMS-derivatives). AMS can be used to analyze the base peak at m/z 60.021, 73.029 in mass fragment-grams with a multiple-peak Gaussian curve fit algorithm. In the analysis of TMS derivatives by GC${\times}$GC-TOFMS, it can detect m/z 73 as the base ion for the identification of Levoglucosan. It can also observe m/z 217 and 204 with existence of m/z 333. Although the ratios of m/z 217 and m/z 204 to the base ion (m/z 73) in the mass spectrum of GC${\times}$GC-TOFMS lower than those of GC/MS, Levoglucosan can be separated and characterized from D (-) +Ribose in the mixture of sugar compounds. At last, the environmental significance of Levoglucosan will be discussed with respect to the health effect to offer important opportunities for clinical and potential epidemiological research for reducing incidence of cardiovascular and respiratory diseases.

2015년 2월 22일 인천광역시 덕적도에서 포집된 황사의 광물학적 특성 (Mineralogical Properties of Asian Dust Sampled at Deokjeok Island, Incheon, Korea in February 22, 2015)

  • 박미연;정기영
    • 한국광물학회지
    • /
    • 제29권2호
    • /
    • pp.79-87
    • /
    • 2016
  • 황사는 태양광, 대기 가스, 에어로졸, 해양생태계와 상호작용하여 지구 기후에 영향을 미치며, 광물특성은 이와 같은 황사와 환경의 상호작용 이해에 필수적이다. 이 연구에서는 2015년 2월 22일 인천광역시 덕적도에서 포집된 황사시료의 광물특성을 분석하였다. X선회절분석(XRD) 결과, 층상규산염광물이 총 62 wt%이었는데, 일라이트류 점토광물(일라이트 및 일라이트-스멕타이트 혼합층)이 55%로 함량이 가장 높았으며, 그 외 녹니석이 5%, 캐올리나이트가 2% 정도 함유되어 있었다. 비층상규산염 광물로서 석영 18%, 사장석 10%, K-장석 4%, 방해석 5%, 석고 1% 등이 함유되어 있었다. 주사전자현미경(SEM)과 에너지분산분광분석(EDS)에 의한 황사 개별 입자의 광물학적 분석에서도 유사한 조성이 얻어졌다. 황사의 주성분인 극미립 층상규산염광물입자에 대하여 투과전자현미경(TEM) 및 EDS 분석을 실시한 결과, 다양한 성분비율과 혼합양상을 보이는 일라이트류 점토광물이 주요 광물로 확인되었다. SEM 형태 관찰에 의하면 황사입자들은 점토광물이 주성분인 덩어리, 혹은 점토광물로 피복된 석영, 장석, 운모 입자들로 구성되어 있었다. 석고가 점토와 함께 황사입자표면에서 자주 관찰된 반면, 이전에 황사입자에 흔히 수반되는 것으로 보고된 섬유상 방해석은 드물어서, 황사 이동 중에 방해석이 산성대기오염물과의 반응에 의하여 석고로 변한 것으로 추정된다. 2015년 분석 결과는 황사와 환경의 상호작용 모델링을 위한 광물의 대표 특성 수립에 기여할 것이다.

Surface Ozone Episode Due to Stratosphere-Troposphere Exchange and Free Troposphere-Boundary Layer Exchange in Busan During Asian Dust Events

  • Moon, Y.S.;Kim, Y.K.;K. Strong;Kim, S.H.;Lim, Y.K.;Oh, I.B.;Song, S.K.
    • 한국환경과학회지
    • /
    • 제11권5호
    • /
    • pp.419-436
    • /
    • 2002
  • The current paper reports on the enhancement of O$_3$, CO, NO$_2$, and aerosols during the Asian dust event that occurred over Korea on 1 May 1999. To confirm the origin and net flux of the O$_3$, CO, NO$_2$, and aerosols, the meteorological parameters of the weather conditions were investigated using Mesoscale Meteorological Model 5(MM5) and the TOMS total ozone and aerosol index, the back trajectory was identified using the Hybrid Single-Particle Lagrangian Integrated Trajectory Model(HYSPLIT), and the ozone and ozone precursor concentrations were determined using the Urban Ashed Model(UAM). In the presence of sufficiently large concentrations of NO$\sub$x/, the oxidation of CO led to O$_3$ formation with OH, HO$_2$, NO, and NO$_2$ acting as catalysts. The sudden enhancement of O$_3$, CO, NO$_2$ and aerosols was also found to be associated with a deepening cut-off low connected with a surface cyclone and surface anticyclone located to the south of Korea during the Asian dust event. The wave pattern of the upper trough/cut-off low and total ozone level remained stationary when they came into contact with a surface cyclone during the Asian dust event. A typical example of a stratosphere-troposphere exchange(STE) of ozone was demonstrated by tropopause folding due to the jet stream. As such, the secondary maxima of ozone above 80 ppbv that occurred at night in Busan, Korea on 1 May 2001 were considered to result from vertical mixing and advection from a free troposphere-boundary layer exchange in connection with an STE in the upper troposphere. Whereas the sudden enhancement of ozone above 100 ppbv during the day was explained by the catalytic reaction of ozone precursors and transport of ozone from a slow-moving anticyclone area that included a high level of ozone and its precursors coming from China to the south of Korea. The aerosols identified in the free troposphere over Busan, Korea on 1 May 1999 originated from the Taklamakan and Gobi deserts across the Yellow River. In particular, the 1000m profile indicated that the source of the air parcels was from an anticyclone located to the south of Korea. The net flux due to the first invasion of ozone between 0000 LST and 0600 LST on 1 May 1999 agreed with the observed ground-based background concentration of ozone. From 0600 LST to 1200 LST, the net flux of the second invasion of ozone was twice as much as the day before. In this case, a change in the horizontal wind direction may have been responsible for the ozone increase.

시판되고 있는 유사마스크 제품의 여과효율성능 비교평가 (Evaluation of Filtration Performance Efficiency of Commercial Cloth Masks)

  • 장지영;김승원
    • 한국환경보건학회지
    • /
    • 제41권3호
    • /
    • pp.203-215
    • /
    • 2015
  • Objectives: This study was designed to evaluate the filtration efficiencies and pressure drops of five commercial cloth masks (4 plate type, 1 cup type) in comparison to the performance of a class 1 disposable respirator (reference respirator). A further objective was to evaluate the effects of the number of layers and wash treatment independently on filtration efficiencies and pressure drops. Methods: Polydisperse NaCl aerosols were generated in an aerosol chamber and their concentrations were measured by an optical particle counter (OPC) in the size range of $0.3{\sim}10{\mu}m$ (five channels). Results: The filtration efficiencies of the five cloth masks and the reference respirator were D: 9.5%, C: 18.5%, E: 23.6%, A: 28.5%, B: 29.7% and R: 91.1%, respectively, and the pressure drops through them were C, D: 0.8 Pa, E: 1.7 Pa, B: 6.4 Pa, A: 42.7 Pa and R: 19.3 Pa, respectively. The filtration efficiencies of the cloth masks and reference respirator were below the class 1 respirator criterion (${\geq}94.0%$) of the Ministry of Employment and Labor (MOEL) and Ministry of Food and Drug Safety (MFDS). The pressure drops satisfied the class 1 respirator criterion (${\leq}70Pa$) of MOEL and MFDS. When the cloth masks were folded into two and four layers, the filtration efficiencies of cloth masks A, B, C, D (plate type) increased 1.7-4.6 times, and 2.3-6.8 times, respectively, compared to the efficiencies of the same products in a single layer. Pressure drops increased as the number of layers was increased. The filtration efficiency of cloth mask E with a liner was 1.3 times higher than that of the same mask without a liner, and the pressure drop was lower in the no-liner configuration. After a single washing, the filtration efficiencies of all the cloth mask products decreased 1.04-4.0 times compared to those of the same products intact. For the cloth masks C and E, their filtration efficiencies were significantly decreased after washing (p<0.05). The pressure drops of all cloth masks were 1.2-2.0 times lower after washing. Conclusions: The filtration efficiencies of the five cloth masks were below 30% and did not improve greatly by increasing the number of layers. After a single washing, their performances decreased. Considering the above and other issues identified with cloth masks, such as poor fit and stretched fibers through use, people should not expect protection against particulate matters from the cloth masks on the market.

기상조절 실험용 드론의 설계·제작과 활용에 관한 연구 (Development and Case Study of Unmanned Aerial Vehicles (UAVs) for Weather Modification Experiments)

  • 구해정;벨로리드 밀로슬라브;황현준;김민후;김부요;차주완;이용희;백정은;정재원;서성규
    • 대기
    • /
    • 제34권1호
    • /
    • pp.35-53
    • /
    • 2024
  • Under the leadership of the National Institute of Meteorological Sciences (NIMS), the first domestic autonomous flight-type weather modification experimental drone for fog and lower-level cloud seeding was developed in 2021. This drone is designed based on a multi-copter configuration with a maximum takeoff weight of approximately 25 kg, enabling the installation of up to four burning flares for seeding materials and facilitating weather observations (temperature, pressure, humidity, and wind) as well as aerosol (PM10, PM2.5, and PM1.0) particle measurements. This research aims to introduce the construction of the drone and its recent applications over the past two years, providing insights into the experimental procedures, effectiveness verification, and improvement directions of the weather modification drone-based rain enhancement. In particular, partial confirmation of the experimental effects was obtained through the fog dissipation experiment on December 10, 2021, and the lower-level cloud seeding case study on October 5, 2022. To enhance the scope and rainfall amount of weather modification experiments using drones, various technological approaches, including adjustments to experimental altitude, seeding lines, seeding amount, and verification methods are necessary. Through this research, we aim to propose the development direction for weather modification drone technology, which will serve as foundational technology for practical application of domestic rain enhancement technology.

대관령 구름물리관측시스템 산출물 평가 및 FSSP를 이용한 시정환산 시험연구 (Intercomparison of Daegwallyeong Cloud Physics Observation System (CPOS) Products and the Visibility Calculation by the FSSP Size Distribution during 2006-2008)

  • 양하영;정진임;장기호;차주완;정재원;김유철;이명주;배진영;강선영;김금란;최영진;최치영
    • 대한원격탐사학회지
    • /
    • 제26권2호
    • /
    • pp.65-73
    • /
    • 2010
  • 구름과 강수특성을 분석하기 위해 대관령에 구름물리관측시스템(Cloud physics Observation System, 이하 CPOS)을 2003년부터 운영해 오고 있다. 주요 관측 기기는 다음과 같다: FSSP (Forward Scattering Spectrometer Probe), OPC (Optical Particle Counter), VS (Visibility Sensor), PARSIVEL disdrometer, MWR (Microwave Radiometer), MRR (Micro Rain Radar). 앞의 4개 장비는 지상구름 (안개)과 강수 특성을, 뒤의 2개 장비는 연직구름의 특성을 실시간으로 관측하고 있다. CPOS 산출물을 검증하기 위해 FSSP는 흡습성 물질 시딩 실험 중 OPC와, MWR의 가강수량은 라디오존데와, PARSIVEL과 MRR은 우량계와 비교 연구가 수행되었다. 그 결과를 보면 대부분이 0.7이상의 좋은 상관도를 보인다. 이와 같이 신뢰도를 확보한 CPOS 관측 자료는 구름과 에어로솔의 간접효과나 기상조절 실험에 유용한 자료로 활용될 수 있을 것이다. FSSP의 입자 크기 분포를 시정값으로 환산해 보았으며 FSSP 환산 시정값은 visibility sensors (SVS)와 PWD22 (Present Weather Detect 22)의 시정계 값에 비해 1.7~1.9배 과도한 경향을 보였다. 이는 FSSP에 의해 관측되는 입자 크기($2{\sim}47\;{\mu}m$)의 한계 때문으로 사료된다. 향후 다른 입자크기분포를 측정할 수 있는 장비를 도입하여 추가 분석을 추진할 계획이다.