• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.12-24
• /
• 2016

The standard ${\kappa}-{\varepsilon}$ and realizable ${\kappa}-{\varepsilon}$ models are adopted to improve the prediction performance on the recirculating flow. In this paper, the backward facing step flows are used to assess the prediction performance of the recirculation zone. The model constants of turbulence model are obtained by the experimental results and they have a different value according to the flow. In the case of an isotropic flow situation, decaying of turbulent kinetic energy should follow a power law behavior. In accordance with the power law, the coefficients for the dissipation rate of turbulent kinetic energy are not universal. Also, the other coefficients as well as the dissipation coefficient are not constant. As a result, a suitable coefficients can be varied according to each of the flow. The changes of flow over the backward facing step in accordance with model constants of the ${\kappa}-{\varepsilon}$ models show that the reattachment length is dependent on the growth rate(${\lambda}$) and the ${\kappa}-{\varepsilon}$ models can be improved the prediction performance by changing the model constants about the recirculating flow. In addition, it was investigated for the curvature correction effect of the ${\kappa}-{\varepsilon}$ models in the recirculating flow. Overall, the curvature corrected ${\kappa}-{\varepsilon}$ models showed an excellent prediction performance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권8호
• /
• pp.1091-1096
• /
• 2012

유한체적법을 기반으로 나비에 스톡스 방정식을 비구조격자로 풀어 실린더 주위의 공력특성을 규명하였다. 보텍스, 속도, 압력, 잔차, 항력계수 등의 데이터를 가지고 분석하였고 레이놀즈 수는 50, 100이다. 유동특성은 Re>50에서 주기적으로 진동하는 소용돌이를 후류에 형성하며 이 현상은 이동하는 실린더에서도 유사한 현상을 보여 주었다. 지면효과는 실린더 위쪽에서 형성된 소용돌이가 벽면에 근접할수록 실린더의 후방으로 길게 늘어나는 형상을 보이고, 실린더와 근접벽면 사이의 유속이 정체되어 실린더와 벽면 사이의 간격이 0.6 에서는 근접 평판과 실린더 사이의 유동이 거의 끊겨짐을 알 수 있었다. 본 수치계산의 검증을 위하여 항력계수를 타 연구결과와 비교하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권2호
• /
• pp.133-139
• /
• 2013

Morphing aircraft capable of varying their wing form can operate efficiently at various flight conditions. However, radical morphing of the aircraft leads to increased structural complexities, resulting in occurrence of dynamic instabilities such as flutter, which can lead to catastrophic events. Therefore, it is of utmost importance to investigate and understand the changes in flutter characteristics of morphing wings, to ensure uncompromised safety and maximum reliability. In this paper, a study on the flutter characteristics of the folding wing type morphing concept is conducted, to examine the effect of changes in folding angles on the flutter speed and flutter frequency. The subsonic aerodynamic theory Doublet Lattice Method (DLM) and p-k method are used, to perform the flutter analysis in MSC.NASTRAN. The present baseline flutter characteristics correspond well with the results from previous study. Furthermore, enhancement of the flutter characteristics of an aluminum folding wing is proposed, by varying the outboard wing folding angle independently of the inboard wing folding angle. It is clearly found that the flutter characteristics are strongly influenced by changes in the inboard/outboard folding angles, and significant improvement in the flutter characteristics of a folding wing can be achieved, by varying its outboard wing folding angle.

• 대한후두음성언어의학회지
• /
• 제27권1호
• /
• pp.45-50
• /
• 2016

Background and Objectives : This study aims to conduct post-voice therapy to patients with unilateral vocal fold paralysis for vocal improvement, motility recovery and analyze the results. Materials and Methods : Voice therapy was conducted to 13 patients who had shown response to voice therapy amongst 98 patients diagnosed with unilateral vocal fold paralysis. In order to be able compare before and after perceptual, acoustic and aerodynamic evaluations were conducted after voice therapy. Also, by using dysphagia checklist, we have verified whether if the patient had dysphagia prior to voice therapy. The therapy was conducted by improving the larynx movement and glottal contact, whilst removing hypertension of the supraglottic. Results : All 13 patients who underwent voice therapy had shown improvements that are statistically significant from 4 scales excluding the S scale from auditory perception evaluation (p<0.05), with enhanced glottal contact. In acoustic evaluation, Jitter, Shimmer and NHR had shown significant improvement after voice therapy. MPT was also notably improved among aerodynamical evaluation (p<0.001). All 11 patients had with dysphagia prior to voice therapy reported to have improved swallowing functions. Conclusion : Application of adequate voice therapy to patients with unilateral vocal fold paralysis, is an effective method that might be employed in the initial phase. Especially, the voice therapy proposed in this study is expected to be useful for patients in hypertension status due to secondary compensation after initial paralysis, since it focuses on improving vocal symptoms in a calm state with the supraglottis sufficiently relaxed. Also, the therapy is expected to be effective for improving swallowing functions.

• 한국항공우주학회지
• /
• 제41권6호
• /
• pp.429-439
• /
• 2013

본 연구에서는 로터 성능 해석을 위한 로터 성능 해석자를 개발하고 이를 사용하여 방풍 구조물 내부의 로터 성능 해석을 수행하였다. 로터 성능 해석자는 깃요소 이론 기반의 actuator disk model을 사용한 해석자를 사용하였다. 또한, 주변의 구조물로 인한 로터 하중의 비대칭성을 고려하기 위해 깃요소 이론에서 블레이드의 flapping 운동에 대한 해석을 수행하여 유효받음각 계산에 적용하였다. 개발된 해석자를 사용하여 바닥면과 벽면에 의한 로터 성능 변화에 관한 연구와 비교 검증을 수행하였다. 방풍 구조물 형상에 따른 로터 성능 해석을 통해 방풍 구조물에 의한 로터 성능 감소 현상을 확인하였다. 이를 통해 방풍 구조물이 없는 경우 대비 95% 이상의 로터 성능 비를 가지는 방풍 구조물의 유출입덕트 면적을 제안하였다.

• 한국항공우주학회지
• /
• 제36권4호
• /
• pp.307-314
• /
• 2008

회전하는 물체의 표면에 걸리는 정상하중에 의해 발생되는 소음을 이론적으로 해석하여 그 방사특성을 분석하였다. 해석의 편의성을 위해, 물체의 표면에 걸리는 힘은 표면 전체에 고루 분포된 분산하중이 아닌 한 점에 집중된 점하중으로 표현하였고, 소음계산은 엄밀한 Lowson의 하중소음식을 사용하였다. Lowson 식의 각 항들을 수학적으로 보다 자세하게 구분하여 각 항들이 가지는 물리적 특성에 대해 논의하였다. 회전각속도를 변화시켜가며 단일 점하중에 의해 발생되는 소음의 방사특성을 근거리 및 원거리에서 조사하였고 그에 대한 이론적 근거를 제시하였다. 또한 거리에 따른 음압의 크기를 조사하여 근거리와 원거리에서의 음압감소비율 및 회전각가속도의 역할에 대해 논의하였다. 마지막으로, 점하중의 개수가 증가될 때 소음이 오히려 감소하는 현상을 설명함과 더불어 소음저감의 방안과 그 한계점 및 향후 연구주제에 대하여 논의하였다.

• 한국안전학회지
• /
• 제27권1호
• /
• pp.20-25
• /
• 2012

The purpose of the study is to assess the extinguishing concentration of inert gases in engine nacelle fire. The experiment was performed with a two dimensional rectangular bluff body stabilized flames, where the fuel was ejected to counter flow and co-flow against an oxidizer stream. Two inert gases, $CO_2$ and $N_2$, were used for extinguishing agent in the oxidizer and methane was used for fuel. The main experimental parameters were the direction of injecting fuel, the kinds of agent and the velocity ratio between air and fuel streams, which controlled the mixing characteristic near bluff body and the strength of recirculation zone in the downstream. The result shows the flame structure and the mode were strongly dependent with fuel/air ratio and the fuel jet direction. For both flow configurations, the extinguishing concentration of $CO_2$ was smaller than the $N_2$ because of the large heat capacity of $CO_2$. However, the concentration of inert gasesat blowout was much smaller than those in the cup burner and coflow jet diffusion flames, which implies that the extinction mechanism of bluff body stabilized flames was mainly due to the aerodynamic aspect. Compared to co-flow fuel injection, the extinguishing concentration of inert gases under counter flow configuration was lower. The effect of direction might result from the mixing characteristic and strength of recirculation zonearound a bluff body. More details should be investigated for the characteristic of recirculation zone in the wake of bluff body using the LES(Large Eddy Simulation).

• Wind and Structures
• /
• 제26권6호
• /
• pp.369-382
• /
• 2018

Tornadoes are vertical swirling air formed because of the existence of layers of air with contrasting features of temperature, wind flow, moisture, and density. Tornadoes induce completely different wind forces than a straight-line (SL) wind. A suitably designed building for an SL wind may fail when exposed to a tornado-wind of the same wind speed. It is necessary to design buildings that are more resistant to tornadoes. In tornado-damaged areas, dome buildings seem to have less damage. As a dome structure is naturally wind resistant, domes have been used in back yards, as single family homes, as in-law quarters, man caves, game rooms, storm shelters, etc. However, little attention has been paid to the tornadic wind interactions with dome buildings. In this work, the tornado forces on a dome are computed using Computational Fluid Dynamics (CFD) for tornadic and SL wind. Then, the interaction of a tornado with a dome and a prism building are compared and analyzed. This work describes the results of the tornado wind effect on dome and prism buildings. The conclusions drawn from this study are illustrated in visualizations. The tornado force coefficients on a dome building are larger than SL wind forces, about 120% more in x- and y-directions and 280% more in z-direction. The tornado maximum pressure coefficients are also higher than SL wind by 150%. The tornado force coefficients on the prism are larger than the forces on the dome, about 100% more in x- and y-directions, and about 180% more in z-direction. The tornado maximum pressure coefficients on prism also are greater those on dome by 150% more. Hence, a dome building has less tornadic load than a prism because of its aerodynamic shape.

• 한국농공학회논문집
• /
• 제59권4호
• /
• pp.75-83
• /
• 2017

Many parts of problems in livestock industry today are associated with organic dust. Endotoxin and toxic gasses on the surface of dust and dust itself can cause aesthetic displeasure and respiratory disease. It also reduces livestock productivity by suppressing immunity of animals and carrying microbes causing animal disease. However, dust level of cattle farm was rarely reported in Korea, and regulation for cattle farm worker does not exist. In this paper, dust concentration and environmental condition were regularly monitored in a commercial Korean native cattle farm. The measurement was conducted according to location and working activities. From the measurement, distribution of dust concentration was affected by wind environment, as the result of natural ventilation. TMR mixer was a major source of dust in target cattle house. The maximum inhalable dust concentration was 637.8 times higher than exposure limit as feed dropped into the TMR mixer. It was expected that dust generation could be affected by particle size and drop height of feed. This study suggests potential risk of dust in cattle farm, and necessity for latter study. Effect of aerodynamic condition and TMR processing should be investigated for dust reduction study.

• 한국항공우주학회지
• /
• 제32권6호
• /
• pp.56-63
• /
• 2004

본 연구에서는 공력 압축성 효과를 고려하여 플랩이 있는 무인기 카나드에 대한 동적 공탄성 해석을 수행하였다. 고려한 해석 모델은 국내에서 개발 후보로 검토된 모델 중 하나인 CRW(Canard-Rotor-Wing) 무인기의 전운동(all-movable) 카나드이다. 초기 설계 데이터를 기반으로 하여 등가구조 날개 모델을 구성하였다. 엄밀한 공탄성 특성해석을 위해 주파수 및 시간영역 해석기법이 모두 적용되었으며, 카나드 및 플랩 연결부의 회전강성 변화에 대한 매개변수 연구를 수행하였다. 플랩이 있는 전운동 조종면의 경우 각 조종축에서의 등가회전강성은 공탄성 안정성에 중요한 설계인자이다. 본 연구를 통하여 설계 초기단계에서 동적공탄성 안정성에 미치는 영향을 파악하였으며 관련 해석결과들을 제시하였다.