• 대한기계학회논문집B
• /
• 제25권4호
• /
• pp.507-513
• /
• 2001

Time averaged pressure distributions in a high-speed centrifugal compressor channel diffuser at design and off-design flow rates are investigated. Pressure distributions from the impeller exit to the channel diffuser exit are measured for various flow rates from choke to near surge condition, and the effects of operating condition are discussed. The strong non-uniformity in the pressure distribution is obtained over the vaneless space and semi-vaneless space caused by the impeller-diffuser interaction. As the flow rate increases, flow separation near the throat, due to large incidence angle at the vane leading edge, increases aerodynamic blockage and reduces the aerodynamic flow area downstream. Thus the minimum pressure location occurs downstream of the geometric throat, and it is named as the aerodynamic throat. And at choke condition, normal shock occurs downstream of this aerodynamic throat. The variation in the location of the aerodynamic throat is discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.548-554
• /
• 2000

The aim of this paper is to understand the time averaged pressure distributions in a high-speed centrifugal compressor channel diffuser at design and off-design flow rates. Pressure distributions from the impeller exit to the channel diffuser exit are measured and discussed far various flow rates from choke to near surge condition, and the effect of operating condition is discussed. The strong non-uniformity in the pressure distribution is obtained over the vaneless space and semi-vaneless space caused by the impeller-diffuser interaction. As the flow rate increases, flow separation near the throat, due to large incidence angle at the vane leading edge, increases aerodynamic blockage and reduces the aerodynamic flow area downstream. Thus the minimum pressure location occurs downstream of the geometric throat, and it is named as the aerodynamic throat. And at choke condition, normal shock occurs downstream of this aerodynamic throat. The variation in the location of the aerodynamic throat is discussed.

• 한국항공우주학회지
• /
• 제46권6호
• /
• pp.496-502
• /
• 2018

본 연구에서는 이젝터의 주유동과 부유동의 모멘텀에 따라 형성되는 공기역학적 목에 관한 현상을 관찰하기 위하여 실험, 해석적 연구를 수행하였다. 상온 실험과 상용프로그램인 FLUENT를 이용한 해석을 통하여 주유동의 유량과 이젝터 실린더의 목 직경의 변화에 따른 성능으로 이젝터 성능의 주요 변수인 공기역학적 목의 평형구간을 관찰하였다. 결과적으로 기준 이젝터에서 유량비 변수는 0.33~1.167(탈설계/설계)의 범위, 실린더 목 직경 변수는 1~1.17(탈설계/설계 면적비)의 범위에서 성능 구현이 확인되었다.

• 대한후두음성언어의학회지
• /
• 제11권2호
• /
• pp.146-160
• /
• 2000

The current study aimed to establish rationales for using three different voice therapies (resonant voice, accent method, and tongue-tip trills) by comparing the aerodynamic, and vocal fold closure characteristics under three therapies. A total of 8 male under/graduate students(tenors) participated as subjects. In order to compare aerodynamic characteristics, air flow rates and subglottal pressures were measured using Phonatory function analyzer under three therapy conditions. The characteristics of vocal fold closure patterns also were examined by comparing closed quotients(CQ) measured by Electroglottograph(EGG) under three therapy conditions. However, maximum phonation time (MPT) was measured under only resonant voice and tongue-tip trills using Aerophone II. The results are summarized as follows : 1) CQ, subglottal pressure and MPT decreased significantly under resonant voice as compared with throat voice, but the air flow rate increased significantly under resonant voice. 2) CQ decreased significantly under accent method as compared with throat voice, but both air flow rate and subglottal pressure increased significantly under accent method. 3) Both CQ and MPT decreased significantly under tongue tip trills as compared with throat voice, but air flow rate and subglottal pressure increased significantly under tongue-tip trills. Clinical implications of results were discussed in light of differential effects of three voice therapies.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.275-278
• /
• 2010

핀틀형 추력기는 운용 도중에 노즐목 면적을 변경시켜 고체추진기관과 같은 추력기를 액체 추진기관과 같이 추력을 자유자재로 조절할 수 있다. 본 논문에서는 SNECMA사(社)에서 개발한 Divert용 핀틀추력기의 핀틀의 형상 변화에 대해 수치해석 기법으로 분석하였다. Bore에 의하여 핀틀 구동시 받게되는 핀틀의 하중은 줄어들었고, 핀틀 형상에 따라 유동장이 크게 변하는걸 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.189-192
• /
• 2011

핀틀추력기는 핀틀 구동을 통해 노즐목을 조절하여 고체추진기관에서도 액체추진기관처럼 추력조절이 가능하도록 설계되어있다. 프랑스 SNECMA에서는 핀틀 중심에 bore라는 홀을 뚫어 설계하였다. 본 연구에서는 수치해석 기법을 통해 bore의 존재에 따른 추력기의 성능에 대해 분석하였다. Bore의 존재는 핀틀에 작용하는 공력하중을 감소시키는 결과를 보였다.

• 대한기계학회논문집B
• /
• 제29권12호
• /
• pp.1285-1290
• /
• 2005

A theoretical analysis of an annular injection supersonic ejector equipped with a second-throat was developed under the assumption that the secondary flow is choked aerodynamically by interaction with primary flow in the mixing chamber. The predicted secondary flow pressure agrees reasonably well with the measurements. Using the analysis, the compression ratio, the secondary flow Mach number, and the location of the choking point were presented in terms of entrainment ratio.

• 대한후두음성언어의학회지
• /
• 제26권2호
• /
• pp.112-116
• /
• 2015

Background and Objectives : Aerodynamic analysis is an examination which provides information regarding various vocalization measures indicating laryngeal efficiency. Voice evaluation using such examination must be capable of distinguishing between normal to abnormal voice. It also observes variables on aerodynamic characteristics by gender in regards to patients of vocal disorders, especially of vocal cord paralysis and vocal polyp, and compares the conditions before and after surgery. This paper therefore, seeks to build a framework for establishing standard levels of aerodynamical characteristic on vocal disorders. Subjects and Methods : The study was intended for a total number of 20 patients with vocal polyp or unilateral vocal cord paralysis. Those with the vocal polyp underwent laryngomycroscopy surgery and the vocal cord paralysis, vocal fold injection using Restylane. Aerodynamic analysis fulfilled the Maximum sustained Phonation (MXPH) and Voicing Efficiency (VOEF) by using PAS Model 6600 (KayPENTAX, USA). Results : In MXPH, increase in PHOT were evident with vocal polyp after surgery. As for patients with vocal cord paralysis, MAXDB, MEADB, DHODB, PHOT all have increased and MEAP, PEF, MEAF decreased after surgery. In VOEF, patients with vocal cord paralysis who underwent surgery showed increase in MAXDB, MEADB, DHODB, FET100, ARES, but decreases in PEF, TARF. Conclusion : Overall, it can be concluded that patients with the vocal polyp and vocal cord paralysis seemed to get closer to the normal values after than before surgery in majority of measures. This confirms that the function of their vocal cord has improved nearly to normality through operations.

• 한국추진공학회지
• /
• 제21권3호
• /
• pp.1-9
• /
• 2017

노즐 목 내부형 핀틀추력기에서 핀틀 행정거리가 추력기 성능에 미치는 영향에 대해 전산수치해석 연구를 수행하였다. 해석결과 핀틀 행정거리가 증가함에 따라 추력조절비는 2% 이내였고, 공력하중비는 최대 22%로 확인되었다. 노즐 목을 지난 유동이 핀틀의 형상으로 인해 급격히 팽창하며 충격파가 발생하였다. 특히, 핀틀 행정거리 4, 5 mm에서는 충격파가 노즐 벽면에 부딪치며 박리거품이 발생하였다. 고도에 따라서는 추력은 증가하였고 공력하중은 감소하였지만, 그 차이가 1.5% 이내로 작았다. 보어가 있는 경우 핀틀 팁의 면적 감소로 공력하중이 감소하는 결과를 보였다.

• Advances in aircraft and spacecraft science
• /
• 제3권4호
• /
• pp.367-378
• /
• 2016

Thrust Vectoring is a dynamic feature that offers many benefits in terms of maneuverability and control effectiveness. Thrust vectoring capabilities make the satisfaction of take-off and landing requirements easier. Moreover, it can be a valuable control effector at low dynamic pressures, where traditional aerodynamic controls are less effective. A numerical investigation of Fluidic Thrust Vectoring (FTV) is completed to evaluate the use of fluidic injection to manipulate flow separation and cause thrust vectoring of the primary jet thrust. The methodology presented is general and can be used to study different techniques of fluidic thrust vectoring like shock-vector control, sonic-plane skewing and counterflow methods. For validation purposes the method will focus on the dual-throat nozzle concept. Internal nozzle performances and thrust vector angles were computed for several range of nozzle pressure ratios and fluidic injection flow rate. The numerical results obtained are compared with the analogues experimental data reported in the scientific literature. The model is integrated using a finite volume discretization of the compressible URANS equations coupled with a Spalart-Allmaras turbulence model. Second order accuracy in space and time is achieved using an ENO scheme.