• 한국군사과학기술학회지
• /
• 제8권2호
• /
• pp.77-87
• /
• 2005

The thermomechanical characteristics were evaluated for 17-4PH stainless steel widely used in supersonic airframe subjected to both aerodynamic loading and heating. The thermomechanical tests were conducted under both elevated temperature and rapid heating condition from $1^{\circ}C/sec\;to\;28^{\circ}C/sec$. The thermomechanical behaviors under rapid heating were compared with those of elevated temperature after 1/2 hour exposure in terms of yield stress to investigate the influence of heating rates. A heating rate-yield temperature parameter was suggested for rapid heating based on time-temperature parameters, and master yield stress curve was obtained by using these parameters. The experimental results and methodology from this study can be used as basic engineering data when designing supersonic vehicle structures subjected to aerodynamic loading and severe heating environment.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 추계 학술대회논문집
• /
• pp.109-113
• /
• 2002

Numerical analysis of aerodynamic heating for KPSAM is performed using aerodynamic heating model suitable to KPSAM, which has complex flow field resulting from the spike attached to the dome, such as large separation area and the strong shock/boundary layer interaction region around reattachment point on the dome. The aerodynamic heating model is validated and modified through the comparison between the flight test measurement and the thermal analysis results. TFD temperature sensors are installed on the dome to measure surface temperature during the flight. Computation results, obtained from the heat transfer analysis on the sensors, agree well with flight test data. The aerodynamic heating model provides heat transfer rate into surface as a boundary condition of unsteady 1D/axisymmetric thermal analysis on the missile structure. The axisymmetric thermal analysis using FLUENT is more versatile than the 1D analysis and can be applied to the heating problem related with complex structures and multi-dimensional heat transfer problems such as prediction of temperature rise at contact surface of different materials.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.21-29
• /
• 2004

Numerical analysis of aerodynamic heating for KPSAM is performed using aerodynamic heating model suitable to KPSAM, which has complex flow field resulting from the spike attached to the dome, such as large separation area and the strong shock/boundary layer interaction region around reattachment point on the dome. The aerodynamic heating model is validated and modified through the comparison between the flight test measurement and the thermal analysis results. TFD temperature sensors are installed on the dome to measure surface temperature during the flight. Computation results, obtained from the heat transfer analysis on the sensors, agree well with flight test data. The aerodynamic heating model provides heat transfer rate into surface as a boundary condition of unsteady 1D/axisymmetric thermal analysis on the missile structure. The axisymmetric thermal analysis using FLUENT is more versatile than the 1D analysis and can be applied to the heating problem related with complex structures and multi-dimensional heat transfer problems such as prediction of temperature rise at contact surface of different materials.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.239-242
• /
• 2004

The fairing of the launch vehicles has a role of protecting the spacecraft from outer thermal, acoustical, and mechanical loads during flight. Among them, the thermal load is analyzed in the present study. The ascent thermal analyses include aerodynamic heating rate on every point of the fairing, heat transfer through the fairing and spacecraft, and the final temperature during ascent flight phase. A design code based on theoretical/experimental database is applied to calculate the aerodynamic heating rate, and a thermal math program, SINDA/Fluint, is considered for conductive heat transfer of the fairing. The results show that the present design satisfies the allowing temperature of the structure. Another important thermal problem, pyro explosive fairing separation device, is calculated because the pyro system is very sensitive to the temperature. The results also satisfies the pyro thermal condition.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.101-108
• /
• 2004

본 연구에서는 비행체 구조재료인 A12024-T3에 대하여 공력가열환경을 모사할 수 있는 복사가열기를 제작하였으며 $1^{\circ}C/sec{\sim}30^{\circ}C/sec$ 가열률 범위에서 열기계적 인장특성을 평가하였다. 가열환경에 따른 재료강도 평가를 위하여 급속가열 인장시험 결과와 일정 온도로 30분 노출후의 인장시험결과를 항복응력 측면에서 비교 고찰하였다. 급속가열 인장시험 결과로부터 시간-온도계수를 응용한 가열률-항복온도 계수를 도출하였으며, 항복응력을 가열률과 항복온도로 표현되는 실험적 master 수식을 제안하였다. 본 연구 결과를 통하여 획득 된 급속가열 안장시험결과들은 초음속 비행체 설계시 선정재료의 안전여유를 판단하는 기초자료로 활용될 수 있다.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.54-63
• /
• 2004

2002년 11월 28일 발사된 KSR-III 과학로켓에서 공력가열로 인한 온도상승을 측정하였으며, 로켓 외피의 온도 및 공력가열량을 계산하였다. 계산에 사용된 소프트웨어는 이론식에 기초한 경계층을 해석하여 비행시간동안 비정상 공력가열량을 계산하는 MINIVER 코드이며, 비행체 내부로의 일차원 고체 열전도까지 고려하였다. 계산 결과 비행체 내부 페이로드 장착부분의 열전달은 대부분 복사로 이루어지고, 공력가열로 인한 KSR-III 외피 최고온도는 핀에서 $223^{\circ}C$이며 최대 공력가열은 노즈캡에서 $133kW/m^2$이었다. 중요부분에서 재질의 허용온도를 만족하였으며 외피 단열재 설계가 적절히 이루어졌음이 확인되었다.

• 항공우주기술
• /
• 제1권1호
• /
• pp.128-134
• /
• 2002

고속비행 중의 공력가열과 같은 외부 열전달로부터 외피 구조물과 내부 탑재물을 보호하기 위하여, KSR-III의 외피에 단열처리가 필요하였다. 일련의 시험과 분석을 통하여 선정된 단열재인 BMS 10-102는 스프레이 가공 형식의 점착성 물질로서 외피에 도포 후 경화시키며, 낮은 열전달율과 낮은 밀도와 같은 특성을 지녀 우수한 단열효과를 기대할 수 있다. 본 연구에서는 KSR-III 기본형 설계에서 대표적인 다층구조인 노즈 페어링부의 honeycomb 샌드위치 구조에 대한 단열해석을 수행하였다.

• 한국추진공학회지
• /
• 제15권5호
• /
• pp.10-18
• /
• 2011

스크램제트 연소기용 파일런 분사기를 공력가열로부터 보호하기 위한 새로운 냉각 방법을 제안하고, 이를 수치적으로 검증하였다. 비행 마하수가 8인 경우를 고려하였으며, 공기를 냉각 유체로 고려하였다. 수치연구를 위하여 3차원 Navier-Stokes 방정식과$k-{\omega}$ SST 난류 모델을 이용하였다. 냉각류를 파일런 위쪽에서 하향 분사하는 방법은, 냉각류를 파일런 바닥 쪽에서 상향 분사하는 방법에 비해 적은 유량으로 더 나은 냉각효과를 나타내었다. 또한, 순압력 구배 상황에서 냉각류를 분사함으로써 분사유동의 박리가 줄어들고 파일런 분사기 앞쪽에 유동장 교란이 줄어들어, 압력손실 저감 효과가 있음을 확인하였다.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.413-421
• /
• 2014

Since the structural temperature of a flight vehicle flying at high speed rises rapidly due to aerodynamic heating, it is necessary for optimum structural design to obtain proper material properties at high temperature by taking into account of its operational environment. For a special alloy, analysis data on strength change due to exposure time to high temperature are very limited, and most of them are for an exposure time longer than 30 minutes for long term operations. In this study, base and weld metal samples of Ti-6Al-4V alloy had been prepared and high temperature tensile tests with induction heating were performed, and then high temperature strength characteristics and strength recovery characteristics through cooling have been analyzed. Pre-tests to determine maximum heating rate were performed, and response characteristics for temperature control were confirmed. As a result, high temperature tensile strength appeared to be lower than that of room temperature, but it was higher than that of high temperature of 30 minite exposure listed in MMPDS. In strength recovery through cooling Ti-6Al-4V alloy has shown higher recovery rate compared with other alloys.

• 한국전산유체공학회지
• /
• 제10권1호
• /
• pp.16-23
• /
• 2005

The objective of this research is to estimate two dimensional ablating and charring of heat shield materials in severe aero-thermal heat transfer. This estimation requires an accurate and rapid technique for its serious heat transfer with a moving boundary. Aerodynamic heating is obtained by an explicit relation which is a function of Mach number and air condition, while a fully implicit method is used for heat transfer calculations. Moving boundary is captured by FLIAR method which is a subgroup of VOF. Thickness of ablating and charring of heat shield, temperature of the moving surface and rate of radiation heat are calculated and compared with references. The results are in good agreement with other calculations.