• Tunnel and Underground Space
• /
• v.28 no.3
• /
• pp.193-208
• /
• 2018

In order to interpret rock slope safely and effectively, the mechanical properties of the rock must be carefully investigated. However, due to the limitations of clinometer usage, a new measure of measurement is required to complement these limitations. In this study, a measuring device was developed to analyze the characteristics of joint orientation, and to apply the orientation of joint to the field. The developed measuring equipment is divided into analysis software and hardware. The hardware was composed of a measuring module that measures the joint orientation of rock and a transport module that transmits the measurement data. The software was developed to analyze the orientation of the joint from the data obtained from the measuring module and is named Drone Joint Orientation Survey Measurement. The developed measuring equipment was well field capable if it could not be measured by the inspector, such as in areas where access was difficult, and was capable of effectively analyzing the lab test results for the orientation of the joint.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.251-258
• /
• 2007

Airborne Lidar (light detection and ranging) can be an effective alternative in forest inventory to overcome the limitations of conventional field survey and aerial photo interpretation. In this study, we attempt to develop methodologies to identify individual trees and to estimate tree height from airborne Lidar data. Initially, digital elevation model (DEM) data representing the exact ground surface were generated by removing non-ground returns from the multiple-return laser point clouds, obtained over the coniferous forest site of rugged terrain. Based on the canopy height model (CHM) data representing non-ground layer, individual tree heights are extracted through pseudo-grid method and moving window filtering algorithm. Comparing with field survey data and aerial photo interpretation on sample plots, the number of trees extracted from Lidar data show over 90% accuracy and tree heights were underestimated within 1.1m in average at two plantation stands of pine (Pinus koraiensis) and larch (Larix leptolepis).

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.2
• /
• pp.119-125
• /
• 2017

The mud flat in Korea is the geographical feature generated from the sediment of rivers of Korea and China and it is the important topography for pollution purification and fishing industry. The mud flat is difficult to access such that it requires the aerial survey for the high-resolution spatial information of the area. In this study we used drones instead of the conventional aerial and remote sensing approaches which have shortcomings of costs and revisit times. We carried out GPS-based control point survey, temporal image acquisition using drones, bundle adjustment, stereo image processing for DSM and ortho photo generation, followed by co-registration between the spatio-temporal information.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.469-479
• /
• 2016

Kimchi cabbage is one of the most important vegetables in Korea and a target crop for market stabilization as well. In particular Kimchi cabbages in a highland area are very sensitive to the fluctuations in supply and demand. Yield variability due to growth conditions dictates the market fluctuations of Kimchi cabbage price. This study was carried out to understand the distribution of the highland Kimchi cabbage growth status in Anbandeok. Anbandeok area in Gangneung, Gangwon-do, Korea is one of the main producing districts of highland Kimchi cabbage. The highland Kimchi cabbage status map of each growth factor was obtained from unmanned aerial vehicle (UAV) imagery and field survey data. Six status maps include UAVRGB image map, normalized difference vegetation index (NDVI) distribution/anomaly map, Crop distribution map, Planting/Harvest distribution map, Growth parameter map and Growth disorder map. As a result, the highland Kimchi cabbage status maps from May 31 to Sep. 6 in 2016 were presented to show spatial variability in the field. The benefits of the highland Kimchi cabbage status map can be summarized as follows: crop growth monitoring, reference for field observations and survey, the relative comparison of the growth condition in field scale, evaluation of growth in comparison of average year, change detection of annual crops or planting areas, abandoned fields monitoring, prediction of harvest season etc.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.213-225
• /
• 2018

For constructing three-dimensional (3D) spatial information occlusion region problem arises in the process of taking the texture of the building. In order to solve this problem, it is necessary to investigate the automation method to automatically recognize the occlusion region, issue it, and automatically complement the texture. In fact there are occasions when it is possible to generate a very large number of structures and occlusion, so alternatives to overcome are being considered. In this study, we attempt to apply an approach to automatically create an occlusion region based on learning by patterning the blocked region using the recently emerging deep learning algorithm. Experiment to see the performance automatic detection of people, banners, vehicles, and traffic lights that cause occlusion in building walls using two advanced algorithms of Convolutional Neural Network (CNN) technique, Faster Region-based Convolutional Neural Network (R-CNN) and Mask R-CNN. And the results of the automatic detection by learning the banners in the pre-learned model of the Mask R-CNN method were found to be excellent.

• Journal of Environmental Impact Assessment
• /
• v.8 no.3
• /
• pp.77-90
• /
• 1999

The degree of green naturality (DGN) has played a key role for maintaining the environmental quality from inappropriate developments, although the quality and effectiveness of the mapping of DGN has been under debate. In this study, spatial distribution of degree of green naturality was initially estimated from forest stand maps that were produced from the aerial photo interpretation and extensive field survey. Once the boundary of initial classes of DGN were defined, it were overlaid with normalized difference vegetation index (NDVI) data that were derived from the recently obtained Landsat Thematic Mapper data. NDVI was calculated for each pixel from the radiometrically corrected satellite image. There were no significant differences in mean values of vegetation index among the initial DGN classes. However, the satellite derived vegetation index was very effective to delineate the developed and damaged forest lands and to adjust the initial value of DGN according to the distribution of NDVI within each class.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.385-392
• /
• 2010

A LiDAR technique has the merits that survey engineers can get a large number of measurements with high precision quickly. Aerial photos and satellite sensor images are used for generating 3D spatial images which are matched with the map coordinates and elevation data from digital topographic files. Also, those images are used for matching with 3D spatial image contents through perspective view condition composed along to the designated roads until arrival the corresponding location. Recently, 3D aviation image could be generated by various digital data. The advanced geographical methods for guidance of the destination road are experimented under the GIS environments. More information and access designated are guided by the multimedia contents on internet or from the public tour information desk using the simulation images. The height data based on LiDAR is transformed into DEM, and the real time unification of the vector via digital image mapping and raster via extract evaluation are transformed to trace the generated model of 3-dimensional downtown building along to the long distance for 3D tract model generation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.13-19
• /
• 2009

The Gwangalli Beach, one of beaches representative of Busan together with the Haeundae Beach, is a tourist attraction, having increased tourists since the completion of Gwangandaero Bridge in 2003 and recording more than 10 million tourists in 2006. Although the competent local government office has conducted artificial beach nourishment/gravel removal projects every year to manage it, systematic monitoring and studies of erosion are insufficient. This study analyzed the changes in the coastline of Gwangalli Beach using aerial photos, tidal data, GPS survey data for the last sixty years, and examined how the Gwangandaero Bridge, which had been constructed on the Gwanganlli sea, has affected the changes. The results show that the area of Gwangalli Beach has increased 40% for the last sixty years, and that the effects of Gwangandaero Bridge on the coastline are insignificant.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.1
• /
• pp.1-12
• /
• 2017

Planting trees is a very common practice in the coastal dunefields of South Korea as a way to stabilize dune landscapes and protect inland residential areas from strong winds and blown sands. On the other hand, disturbing the original foredune environment may deteriorate the ability of coastal landsto recover from coastal erosion after storms, causing a retreat of coastline. However, there is little information of this sort on the surface of forested dunefields. Airborne LiDAR or drone-based mapping is not easily applicable in such areas. In this study, we developed a digital terrain model of Dasari dunefields, Chungnam Province, based on direct topographic surveys with real-time kinematic GPS and total stations. We also analyzed previous two aerial photographs taken in 1947 and 1966, in order to detect an older landforms of the dunefields. Results suggested that there have been little changes in geomorphology of the Dasari dunefields for the last 50 years, despite continued tree plantings. Today, there are remains of U-shaped structures such as blowouts and parabolic dunes in the dunefields.

• Journal of Engineering Education Research
• /
• v.24 no.5
• /
• pp.46-52
• /
• 2021

This study introduces the development and application of instructional materials for a micro-UAV (unmanned aerial vehicle) design and manufacturing program in university education for freshman/sophomore students. The ADDIE methodology was applied to the development of educational materials, which consist of 15 lessons including the aircraft design theory, 3D CAD modeling, 3D printing production, and UAV flight control. The validity of the program was evaluated with 8 expert panels. A total of 82 participants from engineering and social science grouped the 16 teams for the creative UAV wing design and cooperative interactions. The results of overall program satisfaction survey was measured highly as the average 4.54 (out of 5), so that the students were content with the professional engineering knowledge, 3D digital tools, and the opportunity to design and manufacture airplanes on their own. In conclusion, it can be confirmed that the developed program is effective for UAV education for junior level college student.