• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.249-260
• /
• 2009

The georeferencing accuracy of the sensory data acquired by an aerial monitoring system heavily depends on the performance of the GPS/IMU mounted on the system. The employment of a high performance but expensive GPS/IMU unit causes to increase the developmental cost of the overall system. In this study, we simulate the images and GPS/IMU data acquired by an UAV-based aerial monitoring system using an inexpensive integrated GPS/IMU of a MEMS type, and perform the image georeferencing by applying the aerial triangulation to the simulated sensory data without any GCP. The image georeferencing results are then analyzed to assess the accuracy of the estimated exterior orientation parameters of the images and ground points coordinates. The analysis indicates that the RMSEs of the exterior orientation parameters and ground point coordinates is significantly decreased by about 90% in comparison with those resulted from the direct georeferencing without the aerial triangulation. From this study, we confirmed the high possibility to develop a low-cost real-time aerial monitoring system.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.100-102
• /
• 2003

This system is capable of obtaining quantitative information from images using natural features on the ortho-image maps that correspond with those from topographical maps. However, the qualitative information can also be obtained because because of the excellent visibility of ortho-image maps. There are plenty of promise for the use of ortho-image maps in the next generation topographic technology because of its wider applicability within the field. In keeping with the cutting edge, we produced ortho-image maps by scanning a specified area in narrow sections using the PKNU 2: a multispectral digital aerial photographing system made by ourselves. We evaluated the precision of the ortho-image maps, and performed an evaluation of the PKNU 2 system's capacity to improve the equipment of the PKNU 2. Ortho-image maps were made using Ground Control Points (GCPs) which were obtained from digital maps and aerial photographs of the PKNU 2. Thus, we demonstrated that it was possible to produce the ortho-image maps, which has a good constant level rate of less than 1m. The PKNU 2 system needs to be improving in the sensitivity of level maintenance equipment in the evaluation in terms of performance. It is thus required to survey the GCPs precisely for an accurate study.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.899-902
• /
• 2006

For a quick and accurate 3D modelling of a building, laser scanning data, digital maps, aerial photographs and satellite images should be fusioned. Moreover, library establishment according to a standard structure of a building and effective texturing method are required in order to determine the structure of a building. In this study, we made a standard library by categorizing Korean village forms and presented a model that can predict a structure of a building from a shape of the roof on an aerial photo image. We made an ortho image using the high-definition digital image and considerable amount of ground scanning point cloud and mapped this image. These methods enabled a more quick and accurate building modelling.

• Korean Journal of Remote Sensing
• /
• v.25 no.3
• /
• pp.233-242
• /
• 2009

This paper presents two different types of supervised classifiers such as support vector machine (SVM) and spectral angle mapper (SAM). The Compact Airborne Spectrographic Imager (CASI) high resolution aerial image was classified with the above two classifier. The image was classified into eight land use /land cover classes. Accuracy assessment and Kappa statistics were estimated for SVM and SAM separately. The overall classification accuracy and Kappa statistics value of the SAM were 69.0% and 0.62 respectively, which were higher than those of SVM (62.5%, 0.54).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.590-598
• /
• 2019

Aerial photographs taken by an image sensor fixed on a flight body, e.g. without a gimbal, are generally distorted according to its attitude, altitude and angle of view in flight. This can result in a significant difficulty of analyzing geometric information which should be integrated for numerous still frames. In this study, a simulation method of observation performance that uses geometric relationships between navigation data and image data is suggested, and this method is shown to be very useful for easily examining the integrated information such as the total range of photography, the time of target acquisition, etc.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.59-66
• /
• 2000

This study describes the precise DTM by image processing method through scanning the positive film of aerial photo using scanner instead of plotter. First, scanned the positive film of aerial photo by drum scanner and flatbed scanner in different resolution, and then compared the height from image processing method using auto correlation method with height which is taken using $50^m{\times}50^m$ grid in 1 :5,000 geographical map. It shows that heights from aerial photo image of high resolution obtained from scanner are comparable to the heights from 1：5,000 geographical map.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.3
• /
• pp.173-179
• /
• 2015

In this paper, object-based classification of urban areas based on a combination of information from lidar and aerial images is introduced. High resolution images are frequently used in automatic classification, making use of the spectral characteristics of the features under study. However, in urban areas, pixel-based classification can be difficult since building colors differ and the shadows of buildings can obscure building segmentation. Therefore, if the boundaries of buildings can be extracted from lidar, this information could improve the accuracy of urban area classifications. In the data processing stage, lidar data and the aerial image are co-registered into the same coordinate system, and a local maxima filter is used for the building segmentation of lidar data, which are then converted into an image containing only building information. Then, multiresolution segmentation is achieved using a scale parameter, and a color and shape factor; a compactness factor and a layer weight are implemented for the classification using a class hierarchy. Results indicate that lidar can provide useful additional data when combined with high resolution images in the object-oriented hierarchical classification of urban areas.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.63-69
• /
• 2011

Recent growth of the geospatial information on the web made it possible to applicate spatial data. Also, the demand for rich and latest information shows a steady growth. The need for the new service using conflation of the existing spatial databases is on the increase. The information delivery of the services using the road vector and aerial image is reached intuitionally and accurately. However, the spatial inconsistencies in map services such as Daum map, Naver map and Google map is the problem. Our approach is processed to extract the road candidate image, match the template and filter the control points pair using vector median. Finally, CNS node and link are aligned to the real road with the aerial image. The experimental results show that our approach can align a set of CNS node and link with aerial imagery for daejon, such that the completeness and correctness of the aligned road have improved about 35% compare with the original roads.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.270-278
• /
• 2008

This study : An analysis of position accuracy of topography according to using LiDAR data, aerial photo and digital map for a study area was conducted. The study area was selected in Hadan area, Sahagu, Busan aerial LiDAR data and aerial photo in the scales of 1:20,000, which are high tech surveying ways were used. The final digital orthoimage according to orientation process for each image and image resampling was producted. Using it, a checkpoint was chosen, information about the checkpoints selected was extracted, a coordinate of Horizontal Position through the screen digitizing was also extracted. Both the coordinates of LiDAR data and aerial photo using digital map in the scales of 1:20,000 announced to the public from NGII(National Geographic Information Institute) were gradually compared and analyzed. Based on the digital map, as a result of being both compared and analyzed, it has shown to us that horizontal position of aerial photo is more accurate than that of aerial LiDAR surveying (RMSE-building x:24cm, y:26cm).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.7
• /
• pp.1081-1087
• /
• 2015

Recently, the researches of aerial drones are actively executed in various areas, the researches of surface drones and underwater drones are also executed in marine areas. In case of surface drones, they essentially utilize acoustic information by the sonar and consequently have the local information in the obstacle avoidance as the sonar has the limitations due to the beam width and detection range. In order to overcome this, more global method that utilizes optical images by the camera is required. Related to this, the aerial drone with the camera is desirable as the obstacle detection of the surface drone with the camera is impossible in case of the existence of clutters. However, the dynamic-floating aerial drone is not desirable for the long-term operation as its power consumption is high. To solve this problem, a collaborative obstacle avoidance method based on the acoustic information by the sonar of the surface drone and the optical image by the camera of the static-floating aerial drone is proposed. To verify the performance of the proposed method, the collaborative obstacle avoidances of a MSD(Micro Surface Drone) with an OAS(Obstacle Avoidance Sonar) and a BMAD(Balloon-based Micro Aerial Drone) with a camera are executed. The test results show the possibility of real applications and the need for additional studies.