• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.417-422
• /
• 2008

With standard orthorectification algorithms, one can produce unacceptable structure duplication in the orthophoto due to the double projection. Because of the abrupt height differences, such structure duplication is a frequently occurred phenomenon in the dense urban area which includes multi-history buildings. Therefore, occlusion area detection especially for the urban area is a critical issue in generation of true orthophoto. This paper deals with occlusion area detection with visible height based approach from aerial imagery and LiDAR. In order to accomplish this, a grid format DSM is produced from the point clouds of LiDAR. Next, visible height based algorithm is proposed to detect the occlusion area for each camera exposure station with DSM. Finally, generation of true orthophoto is presented with DSM and previously produced occlusion maps. The proposed algorithms are applied in the Purdue campus, Indiana, USA.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.304-311
• /
• 2022

Although the SEAD(suppression to enemy air defenses) mission is a strategically important task in modern warfare, the high risk of direct exposure to enemy air defense assets forces to use of unmanned aerial vehicles. this paper proposes a path planning algorithm for SEAD mission for an unmanned aerial vehicle and a method for calculating the mission effectiveness on the planned path. Based on the RRT-based path planning algorithm, a low-altitude ingress/egress flight path that can consider the enemy's short-range air defense threat was generated. The Dubins path-based Intercept path planning technique was used to generate a path that is the shortest path while avoiding the enemy's short-range anti-aircraft threat as much as possible. The ingress/intercept/egress paths were connected in order. In addition, mission effectiveness consisting of fuel consumption, the survival probability, the time required to perform the mission, and the target destruction probability was calculated based on the generated path. The proposed techniques were verified through a scenario.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.145-154
• /
• 2014

The road network becomes more complex and extensive. Therefore, the inconveniences are caused in accordance with the time delay of the restoration of damaged roads, demands for excessive costs on information collection, and limitations on acquisition of damage information of the roads. Recently, road centric spatial information is gathered using mobile multi sensor system for road inventory. But expensive MMS(Mobile Mapping System) equipments require high maintenance costs from beginning and takes a lot of time in the data processing. So research is needed for continuous maintenance by collecting and displaying the damaged information on a digital map using low cost mobile camera system. In this research we aim to develop the techniques for mosaic with a regular ground sample distance using successive image from oblique camera on a vehicle. For doing this, mosaic image is generated by estimating the homography of high resolution oblique image, and the ground sample distance and appropriate overlap are analyzed using high resolution aerial oblique images which contain resolution target. Based on this we have proposed the appropriate overlap and exposure interval for mobile road inventory system.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.181-191
• /
• 2004

Nowadays, GPS-photogrammetry can be applied to the basemap production, a land register and NGIS. And from now on, as the increase of GPS receiver rate, the study on the interpolation methods considering the exact movement of an aircraft at photoflight and the study on the supplement of GPS defect by INS are required continuously. GPS-Photogrammetry, which are based on the direct measurement of the projection centers and attitude at the moment of camera exposure time through loading the GPS receiver in aircraft. This photogrammetric methods can of for us to acquire the exterior orientation parameters with only minimum ground control points, even the ground control process could be completely skipped. Consequently, we can drastically reduce the time and cost far the mapping process. In this thesis, two test flights were conducted in area to evaluate the performance of accuracy and efficiency through the analysis of results between the two photogrammetric methods, that is, traditional photograrammetry, GPS-Photogrammetry. Test results shows that a large variety of advantages of GPS-Photogrammetry against traditional photogrammetry is to be verified. Especially, the number of ground control points for the exterior orientation could be saved more than 70～80%, and the cost far map production 30～50%, respectively. In addition, it was convinced that the large reduction of control points has not any effect on the block accuracy.

• Ocean and Polar Research
• /
• v.36 no.2
• /
• pp.145-156
• /
• 2014

Macrobenthic biodiversity in the rocky intertidal areas of the Tae-an region, Republic of Korea, has decreased since the Hebei Spirit oil spill in December 2007. We aimed to investigate ecological roles of Pacific oyster (Crassostrea gigas) because recruitment and growth of oysters are critical to the recovery of damaged rocky shore ecosystem. We surveyed two sites monthly: natural rocky substrate and farming substrate, from July 2012 to January 2013 to identify and compare the changes in macrobenthic fauna. The abundance of young oysters was higher at the natural site. On the other hand, the mean height of oyster on the farming substrate was more than twice as great. The abundance of oyster at the natural site increased until October and then continuously decreased until end of study period. However, the abundance of oyster at the farming site constantly decreased from the beginning of study period. These different growth patterns might be attributable to spatial competition between oyster and a barnacle species (Balanus albicostatus) and environmental factors. At the natural site, physical stress factors including dramatic temperature changes and desiccation a few of the major factors limiting growth during aerial exposure. In addition, motile macrobenthos could be detrimental to oysters because they interrupt filter-feeding activities and hence hamper the growth of oysters. We show the higher recruitment of oysters at the natural site and healthy growth in the farming substrate are due to complicated differences in physical and biological stress factors.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.4
• /
• pp.471-479
• /
• 2009

A Nanoscale Zero-Valent Iron(NZVI) was modified to build a reactor system to treat nitrate. Shell layer of the NZVI was modified by slow exposure of the iron surface to air flow, which produced NZVI particles that are resistant to aerial oxidation. A XANES (X-ray Absorption Near-Edge Structure) analysis revealed that the shell consists of magnetite ($Fe_3O_4$) dominantly. The shell-modified NZVI(0.5 g NZVI/ 120 mL) was able to degrade more than 95% of 30 mg/L of nitrate within $30 hr^{-1}$ ( pseudo first-order rate constant($k_{SA}$) normalzed to NZVI surface area ($17.96m^2/g$) : $0.0050L{\cdot}m^{-2}{\cdot}hr^{-1}$). Ammonia occupied about 90% of degradation products of nitrate. Nitrate degradation efficiencies increased with the increase of NZVI dose generally. Initial pH values of the reactor systems at 4, 7, and 10 did not affect nitrate removal rate and final pH values of all experiments were near 12. Nitrate removal experiments by using the shell-modified NZVI immobilized on a cellulose acetate (CA) membrane were also conducted. The nitrate removal efficiency of the CA membrane supported NZVI ($k_{SA}=0.0036L{\cdot}m^{-2}{\cdot}hr^{-1}$) was less than that of the NZVI slurries($k_{SA}=0.0050L{\cdot}m^{-2}{\cdot}hr^{-1}$), which is probably due to less surface area available for reduction and to kinetic retardation by nitrate transport through the CA membrane. The detachment of the NZVI from the CA membrane was minimal and impregnation of up to 1 g of NZVI onto 1 g of the CA membrane was found feasible.

• The Korean Journal of Mycology
• /
• v.13 no.2
• /
• pp.115-121
• /
• 1985

An aerial survey for fungal flora in Seoul has been carried out by Petri plate exposure method for a period of one year. A total of 2227 fungal spores appeared in the plates. Of these, Cladosporium was the commonest fungus representing 43.5% of the total spore count followed by Penicillium (15.8%). Alternaria (10.5%), and Aspergillus (3.8%). There were seasonal variations in the prevalence of fungal spores. The occurrence of these fungi was greatly affected by climatic conditions. However, Alternaria appeared to prefer warmer weather. A comparison of fungal population from the outdoor and indoor air was also investigated to support the view that Alternaria is abundant population from the outdoor air and that Cladosporium from the indoor air depending on their availability in the atmosphere.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.39-54
• /
• 2017

Between 1998 and 2010, the computerization of underground facilities was completed in 84 cities. Since 2011, new pipelines have been laid or existing pipelines have been maintained, renovated, and renewed. To measure the exact location and depth of the exposure pipe, a map of underground facilities was created before filling the ground. This method is based on the time when the underground facilities of the National Geographic Information Institute Regulation No. 134 of the National Geographic Information Office revised in 2010 were drafted. The process of the drone taking the video is based on a theoretical basis of ground control points. The method works by removing all ground control points located outside of the error range and re-processing it for calculating the best result. Furthermore, using a drone-based spontaneous measuring method allows workers to obtain a high accuracy underground facilities map in error bound. The proposed method could be used as a new way to standardize the processing.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.261-271
• /
• 2009

Due to the recent rise of a need for 3 dimensional geospatial information on urban areas, general interest in aerial multi-view cameras has been on an increase. The conventional geospatial information system depends solely upon vertical images, while the multi-view camera is capable of taking both vertical and oblique images taken from multiple directions, thus making it easier for the user to interpret the object. Through our research we developed a prototype of a multi-view camera system that includes a camera system, GPS/INS, a flight management system, and a control system. We also studied and experimented with the camera viewing angles, the synchronization of image capture, the exposure delay, the data storage that must be considered for the development of the multi-view camera system.

• The Korean Journal of Mycology
• /
• v.17 no.4
• /
• pp.189-193
• /
• 1989

Ganoderma lucidum formed uniquely non-basidiocarpous basidiospore (NBB) from the aerial mycelia on agar media without the normal basidiocarps. Light was necessary for NBB formation. Best sporulation was obtained at the periodic exposure of 16 hour light and 8 hour darkness for more than 8 days. Effective wave length was blue and yellow but non sporulation was induced by near U.V. light. Effective light intensity for NBB bearing appeared to be about 1,000 Lux as white light. Photomorphogenetic responses in Ganoderma lucidum were clearly different among strains of the fungus.