• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.5
• /
• pp.485-491
• /
• 2008

LiDAR systems are usually incorporated a laser scanner and GPS/INS modules with a digital aerial camera. LiDAR point clouds and digital aerial images acquired by the systems provide complementary spatial information on the ground. In addition, some of laser scanners provide intensity, radiometric information on the surface of the earth. Since the intensity is unnecessary of registration and provides the radiometric information at a certain wavelength on the location of LiDAR point, it can be a valuable ancillary information but it does not deliver sufficient radiometric information compared with digital images. This study utilize the LiDAR points as ground control points (GCPs) to adjust exterior orientations(EOs) of the stereo images. It is difficult to find exact point of LiDAR corresponding to conjugate points in stereo images, but this study used intensity of LiDAR as an ancillary data to find the GCPs. The LiDAR points were successfully used to adjust EOs of stereo aerial images, therefore, successfully provided the prerequisite for the precise registration of the two data sets from the LiDAR systems.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.270-278
• /
• 2008

This study : An analysis of position accuracy of topography according to using LiDAR data, aerial photo and digital map for a study area was conducted. The study area was selected in Hadan area, Sahagu, Busan aerial LiDAR data and aerial photo in the scales of 1:20,000, which are high tech surveying ways were used. The final digital orthoimage according to orientation process for each image and image resampling was producted. Using it, a checkpoint was chosen, information about the checkpoints selected was extracted, a coordinate of Horizontal Position through the screen digitizing was also extracted. Both the coordinates of LiDAR data and aerial photo using digital map in the scales of 1:20,000 announced to the public from NGII(National Geographic Information Institute) were gradually compared and analyzed. Based on the digital map, as a result of being both compared and analyzed, it has shown to us that horizontal position of aerial photo is more accurate than that of aerial LiDAR surveying (RMSE-building x:24cm, y:26cm).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.47-56
• /
• 2010

The use of airborne LiDAR data obtained by airborne laser scanners has increased in the field of spatial information such as building modeling. LiDAR data consist of irregularly distributed 3D coordinates and lack visual and semantic information. Therefore, LiDAR data processing is complicate. This study suggested a method of LiDAR data segmentation using roof surface patches from aerial images. Each segmented patch was modeled by analyzing geometric characteristics of the LiDAR data. The optimal functions could be determined with segmented data that fits various shapes of the roof surfaces as flat and slanted planes, dome and arch types. However, satisfiable segmentation results were not obtained occasionally due to shadow and tonal variation on the images. Therefore, methods to remove unnecessary edges result in incorrect segmentation are required.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.463-471
• /
• 2008

The quality of orthoimages mainly depends on the elevation information and exterior orientation (EO) parameters. Since LiDAR data directly provides the elevation information over the earth's surface including buildings and trees, the concept of true orthorectification has been rapidly developed and implemented. If a LiDAR-driven digital surface model (DSM) is used for orthorectification, the displacements caused by trees and buildings are effectively removed when compared with the conventional orthoimages processed with a digital elevation model (DEM). This study utilized LiDAR data to generate orthorectified digital aerial images. Experimental orthoimages were produced using digital terrain model (DTM) and DSM. For the preparation of orthorectification, EO components, one of the inputs for orthorectification, were adjusted with the ground control points (GCPs) collected from the LiDAR point data, and the ground points were extracted by a filtering method used in a previous research. The orthoimage generated by DSM corresponded more closely to non-ground LiDAR points than the orthoimage produced by DTM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.49-58
• /
• 2012

Buildings become complex and diverse with time. It is difficult to extract individual buildings using only an optical image, because they have similar spectral characteristics to objects such as vegetation and roads. In this study, we propose a method to extract building area and boundary through integrating airborne Light Detection and Ranging(LiDAR) data and aerial images. Firstly, a binary edge map was generated using Edison edge detector after applying Adaptive dynamic range linear stretching radiometric enhancement algorithm to the aerial image. Secondly, building objects on airborne LiDAR data were extracted from normalized Digital Surface Model and aerial image. Then, a temporary building areas were extracted by overlaying the binary edge map and building objects extracted from LiDAR data. Finally, some building boundaries were additionally refined considering positional accuracy between LiDAR data and aerial image. The proposed method was applied to two experimental sites for validation. Through error matrix, F-measure, Jaccard coefficient, Yule coefficient, and Overall accuracy were calculated, and the values had a higher accuracy than 0.85.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.67-68
• /
• 2010

Segmentation of LiDAR data is an important procedure in building modeling. Therefore, in this study, aerial imagery is used to group LiDAR data for both improving segmentation accuracy and modeling detail surface patches of the roofs. The results show that the proposed method is efficient to analyze and to model various types of roof shape.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.181-184
• /
• 2008

The quality of orthoimages mainly depends on the elevation information and exterior orientation (EO) parameters. Since LiDAR data directly provides the elevation information over the earth's surface including buildings and trees, the concept of true orthorectification has been rapidly developed and implemented. If a LiDAR-driven digital surface model (DSM) is used for orthorectification, the displacements caused by trees and buildings are effectively removed when compared with the conventional orthoimages processed with a digital elevation model (DEM). This study sequentially utilized LiDAR data to generate orthorectified digital aerial images. Experimental orthoimages were produced using DTM and DSM. For the preparation of orthorectification, EO components, one of the inputs for orthorectification, were adjusted with the ground control points (GCPs) collected from the LiDAR point data, and the ground points were extracted by a filtering method. The orthoimage generated by DSM corresponded more closely to non-ground LiDAR points than the orthoimage produced by DTM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.545-553
• /
• 2009

Digital Elevation Models (DEM) is widely used in establishing the topographic profile in nation spatial information. Aerial Light Detection And Ranging (LiDAR) system is one of the well-known means to produce DEM. The system has fast data acquisition procedures and less weather-dependent restrictions compared to photogrammetric approaches. In this regards, LiDAR has been widely utilized and accepted in the process of nation spatial information generation due to its sufficient positional accuracy. However, the investigation of the accuracy of aerial LiDAR data over the area of forestation with various kinds of vegetations has been barely implemented in Korea. Hence, this research focuses on the investigation of the accuracy of aerial LiDAR data over the area of forestation and the evaluation of the acquired accuracy according to the characteristics of the vegetations. The study areas include land with shrubs and its adjacent forest area with mixed tree species. The spots for the investigation have been selected to be well-distributed over the whole study areas and their coordinates are surveyed by Global Positioning Systems (GPS). Then, the surveyed information and aerial LiDAR data have been compared with each other and the result accuracy has been evaluated. Conclusively, it is recommended that LiDAR data collection to be conducted after defoliation period, especially over the areas with broadleaf trees due to the possibility of significant outliers.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.1 s.39
• /
• pp.67-73
• /
• 2007

Recently, three-dimensional (3D) GI (Geospatial Information) using LiDAR system has been used various fields such as the production of digital map, the modeling of 3D building and urban area, and analysis of communication network and environmental effect. In this study, the production cost of digital map by aerial LiDAR surveying were compared with the cost by aerial photograph surveying for analysis of economical efficiency. It is expected that the results of this study will be used base data for production, update, revision of digital map and curtail effect of national budget.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.179-190
• /
• 2017

A terrestrial LiDAR survey was conducted and unmanned aerial vehicle(UAV) images were taken for target cultural properties to present the utilization measures of terrestrial LiDAR and UAV in three-dimensional modeling of cultural properties for the identification of the status and restoration of cultural properties. Then the accuracy of the point clouds generated through this process was compared, an overlap analysis of the 3D model was conducted, and a convergence model was created. According to the results, the modeling with terrestrial LiDAR is more appropriate for precise survey because 3D modeling for the detection of displacement and deformation of cultural properties requires an accuracy of mm units. And UAV model has limitation as the impossibility of detailed expression of parts with sharp unevenness such as cracks of bricks. However, it is found that the UAV model has a wide range of modeling and has the advantage of modeling of real cultural properties. Finally, the convergence model created in this study using the advantages of the terrestrial LiDAR model and the UAV model could be efficiently utilized for the basic data development of cultural properties.