• 한국물환경학회지
• /
• 제22권2호
• /
• pp.358-363
• /
• 2006

KSMBR process is dynamic state advanced wastewater treatment applied with Trisectional Aeration (TSA) mode combined with membrane. TSA was remodeled conventional intermittent aeration which was operated nonaeration-aeration. TSA operates nonaeration ($N_1$) - aeration (A) - nonaeration ($N_2$) in Trisectional Aeration Reactor (TAR). Organics of influent could be nearly consumed to denitrification without influence by remained DO in TAR and it could be operated about sludge return ratio of 1Q (influent base). The purpose of this study was to apply KSMBR to the full-scale plant and to evaluate efficiency of nitrogen and phosphorus removal and TSA operation. The result of this study, average CODcr/T-N and CODcr/T-P ratio were 7.8 and 59.6, respectively. BOD, TCODcr, SS, T-N, T-P, E-coli removal efficiency were 98.4, 95.2, 73.0, 69.6, 99.95 %, respectively. KSMBR obtained high removal efficiencies of C, N and P when it applied full-scale plant.

• 한국환경과학회지
• /
• 제27권6호
• /
• pp.447-456
• /
• 2018

In this research, the target process was a modified type of a conventional aeration tank with four different influent feeding points and alternated aeration to obtain nitrogen removal. For more accurate switching of influent feeding, the process was operated under a designed control strategy based on monitoring of $NH_4-N$ and $NO_X-N$ concentrations in the tank. However, the strategy did have some limitations. For example, it was not sensitive to detecting the end of each reaction when losing the balance between nitrification and denitrification of each opposite part of biological tank. To overcome the limitations of the existing control strategy, a diagnosis-based control strategy was suggested in this research using the diagnosis results classified as normal (N), ammonia accumulation (AA) and nitrate accumulation (NA). Using the pre-designed rules for control actions, the aeration and volume of the aerated part of the reactor could be increased or decreased at a fixed mode time. In simulations of the suggested diagnosis-based control strategy, the $NH_4-N$ and $NO_X-N$ removal rates in the reactor were maintained at higher levels than those of the existing control strategy.

• 멤브레인
• /
• 제15권1호
• /
• pp.70-83
• /
• 2005

폭기조를 간헐 폭기로 운전하여 호기/무산소(oxic/anoxic) 시간 비율과 무산소 조건에서 호기 조건으로의 전환시 공기세정이 투과플럭스 및 투과압력에 미치는 영향을 조사하였으며, 호기조건에서 무산소 조건으로 전환 시 펌프의 회전력에 의한 흡인압력이 투과플럭스와 투과 압력에 주는 영향을 조사하였다. 또한 긴 슬러지체류시간(SRT; Sludge Retention Time)과 고농도의 MLSS 유지시에 발생하는 미생물 대사산물이 분리막에 미치는 영향과 응집제를 투여하였을 때 분리막에 작용하는 플러스 효과에 대하여 조사하여 보았다. 호기/무산소(oxic/anoxic)의 시간비율에 따른 유기물 및 질소 제거효율을 조사해본 결과 폭기 40 비폭기 20분의 시간배분 조건에서 처리효율이 가장 양호하였으므로 호기/무산소(oxic/anoxic) 조건을 40/20분으로 한 조건(step-7)에서 약품주입 실험을 수행하였다. 액체 명반을 폭기조에 직접 투여할 경우 약품의 농도가 질산화 및 탈질 미생물에 많은 영향을 주는 것을 알 수 있었으며, MBR공정에서 인 1 mg/L를 제거하기 위해서는 약 0.7 mg/L의 액체명반이 필요한 것으로 확인되었다.

• 환경생물
• /
• 제22권1호
• /
• pp.167-170
• /
• 2004

Phytopathogenic fungi들에 대해 매우 공격적인 Trichoderma hurzianum은 다른 곰팡이들의 세포벽 주성분인 chitin을 분해하는 extracellualr chitinase를 분비하기 때문에 매우 효율적인 biocontrol agent로 사용할 수 있다. Trichoderma harzianum의 생물학적 제어 기능을 이용하기 위하여 extracellualr chitinase의 생산성을 높일 수 있는 batch모드에서의 적정 환경을 찾는 일은 매우 복잡하다. 이러한 문제를 해결할 수 있는 방법이 바로 self-directing optimization이다 이 방법을 이용하여 실험한 결과 6∼7차례의 실험만으로 최적의 온도 혹은 pH 및 폭기율과 교반양을 구할 수 있었다. 그 결과 온도 $32^{\circ}C$, pH4.9, 폭기율 3.22 ι, 교반율 225 rpm에서 chitinase의 최대 생산량 16.825 U를 나타내었다. 이는 온도 $25^{\circ}C$, pH 5, 폭기율 1l, 교반율 150 rpm에서 나타난 chitinase 생산량 4.221 U에 비교하면 3.99배 증가한 효과를 나타내고 있다. 이로서 self-directing optimization방법을 통한 최적화 기술이 효소 생산 기술에 있어 그 최적화 과정을 단축시키고 최종 과정에 도달하는 새로운 기술로 적용할 수 있음을 알 수 있었다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.287-290
• /
• 2000

회분배양에서 교반속도와 통기량에 대한 영향을 살펴본 결과 400 rpm과 1.0 vvm의 조건에서 균체량은 25.1 g/L, 다당체는 2.5 g/L로 가장 높게 생성되었다. 회분배양을 기초로 균체량과 다당체 생성을 높이기 위해 glucose를 대수기에 공급한 결과 배양 6일째 균체량은 29,2 g/L, 다당체 생성은 3.3 g/L로 회분배양보다 우수한 결과를 보였다.

• 공업화학
• /
• 제16권2호
• /
• pp.217-225
• /
• 2005

H사의 유로변경식 고도하수처리 공법의 제어 변수가 DO와 수온 등으로 한정되어 있어 효율성의 만족도를 충족시켜주지 못하는 현재의 상황을 개선하고자 세 가지 개선방향을 설정하여 Simulation을 통한 Operation Data의 분석 및 장치구성과 실험을 통한 최적제어 Logic을 연구하여 이를 다시 S하수처리장에 설치 적용한 결과이다. 본 실험을 통해서 수온과 유량에 근간한 Operation Mode 변경의 최적화와 이를 통한 동력비 절감을 이루었고 암모니아성 질소의 농도에 따른 Operation Mode의 변경에서 일반 Normal Mode와 병행하여 Save Mode를 새로 적용하여 동력비 절감을 이루었다. 또한 DO 값을 송풍량과 수중폭기기의 교반속도에 의해 비례제어하고 유출수의 암모니아 농도에 따라 DO 값을 제어하여 안정적인 질산화를 이루었다. 이러한 결과는 공정효율의 극대화와 운영 및 유지관리비의 절감을 이루었다.

• 상하수도학회지
• /
• 제22권2호
• /
• pp.179-182
• /
• 2008

The KIDEA process, occurred in single reactor, is operated by three consequential steps, i.e., aerobic, settling, and discharge while introducing wastewater into the bottom of reactor continuously. It could accomplish biological oxidation (BOD), nitrification, denitrification (T-N), phosphate removal (T-P), and solid separation (SS) through the operational mode mentioned. Especially, this system has removed the T-P by wasting certain amount of sludge at the end of aeration phase during 5~10 minutes and not returned the activated sludge into the reactor, that is, no RAS (Return Activated Sludge). All running mode and instrumentation were controlled by the PLC equipment automatically. In this study, therefore, we have evaluated T-P removal efficiency and moisture content (MC) performance under the different excess sludge wasting mode. T-P track study and MC with TS concentration were analyzed during aerobic and settling phase. It has revealed that there was no significant difference of released T-P concentration between the first case which waste the sludge at the end of aerobic phase (0.2mg/L) and the second case which waste the sludge at 40 min of settling phase (0.25mg/L). Also, dewatering duration and MC have decreased 1.7% when TS concentration was increased from 0.31% to 0.5% during aerobic condition. Hence, it has concluded the system performance was less influenced by the operation time change of PLC program.

• 한국환경보건학회지
• /
• 제31권1호
• /
• pp.15-22
• /
• 2005

This study was conducted to evaluate air injection mode on stabilization of solid waste in lysimeter. For three lysimeters, one was maintained under anaerobic condition as control, and air was injected into two lysimeters in continuous mode (atmospheric pressure) and intermittent mode (high pressure of 2 bar). Distilled water was sprayed over solid waste in 1.4 l/$m^3$(solid waste)/day, supposing rainfall intensity of 1,200 mm/yr and 30% infiltration. Oxygen in landfill gas was not detected in control lysimeter during operational days. After 30 day-aeration, oxygen concentrations of continuous and intermittent modes were maintained in 14% and 6%, respectively. $COD_{Cr}$ removal efficiencies of continuous and intermittent modes were about 70% and 50%, and BOD5 removal efficiencies were about 80% and 20%, respectively. In view of oxygen supply, and $COD_{Cr}$ and $BOD_5$ removal, continuous air injection mode of atmospheric pressure was more effective than intermittent mode of 2 bar. Settling degree of solid waste in case of two air injection modes was 3 times higher than that of anaerobic condition as control. Considering the above results, it was thought that air injection (especially continuous atmospheric pressure) could improve degradation of solid waste and induce preliminary stabilization in landfill site.

• 한국물환경학회지
• /
• 제24권5호
• /
• pp.618-625
• /
• 2008

Advanced Phase Isolation Ditch (APID) process was studied to develop economic retrofitting technology, for the plants where retrofitting of common activated sludge process is required. In this study, to evaluate the effluent BOD, SS, T-N, and T-P concentrations as process capable and stable parameters for treating municipal wastewater, a demonstration plant was installed and operated in the existing sewage treatment plant of P city. During this study, the average effluent BOD, SS, T-N, and T-P concentrations were 4.56, 5.20, 9.30, and 1.75 mg/L at the conventional mode and 3.95, 3.17, 7.65, and 1.18 mg/L at the modified mode. The modified mode (BOD: 3.69, SS: 3.19, T-N: 1.27, and T-P: 0.69) increased the process capability more than the conventional mode (BOD: 1.80, SS: 1.05, T-N: 2.17, and T-P: 0.15) in this study. If process capability over 1.0, this process is capable and stable to treat wastewater. Therefore, newly developed APID process with modified intermittent aeration mode can be one of the useful processes for stable organic matter and nutrients removal.

• BMB Reports
• /
• 제32권2호
• /
• pp.210-213
• /
• 1999

In Serratia marcescens, acetolactate produced by the catabolic acetolactate synthase (ALS) is converted into acetoin, its physiological role of which is to maintain intracellular pH homeostasis. In this study, the expression mode of catabolic ALS by aeration and branched-chain amino acids was examined by the ELISA method. The amount of catabolic ALS decreased approximately 93% under aerobic conditions. We also showed that the expression of catabolic ALS decreased approximately 34 % and 65 % in the presence of 2.5 mM and 10 mM leucine, respectively. The repression of catabolic ALS by leucine has not been reported previously. In contrast to leucine, catabolic ALS levels increased approximately 13% and 38% by treatment with 2.5 mM and 10 mM isoleucine, respectively, while valine alone did not have any significant effect on the synthesis of catabolic ALS. The amount of catabolic ALS was also reduced to approximately 32% and 45% in the presence of 10 mM Leu+Ile and Leu+Ile+Val, respectively. The regulatory mode of the Serratia catabolic ALS suggests that catabolic ALS may also have a role in supplying acetolactate as an intermediate of valine and leucine biosynthesis in addition to the maintenance of internal pH.