• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.128-135
• /
• 2012

ALC는 경량이며 단열 및 차열 등의 성능이 우수한 반면 낮은 강도로 인한 모서리부의 취성파괴가 발생하기 쉬우므로 운반 및 취급 시 상당한 주의를 요구한다. 본 연구에서는 ALC의 물리적 성능개선을 위해 메타카올린 및 실리카퓸 등의 혼화재나 규석 분말 및 석고의 혼입율을 조절하여 제조한 ALC의 성능을 평가하였다. 연구결과 메타카올린이나 규석 분말의 혼입율이 18%인 경우 강도의 개선이 현저하였다. 이와 같은 결과는 공극의 충전효과에 의한 것으로 강도는 개선되나 밀도가 증가하므로 밀도를 낮추면서 강도를 개선할 수 있는 배합이나 제조법에 대한 연구가 필요하다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권1호
• /
• pp.53-61
• /
• 2015

이 연구에서는 층간소음을 억제하기 위하여 사용되는 뜬바닥구조의 구조거동을 실험을 통하여 평가하였다. 최근 층간소음을 억제하기 위하여 연질의 완충재가 사용되며, 이로 인하여 마감모르타르나 기포콘크리트에 균열이 발생할 가능성이 높아지고 있다. 이 연구에서는 완충재의 강성, 하중가력 위치, 바닥 구성층을 변수로 하는 16개의 2방향 뜬바닥구조를 실험하였다. 실험에 의하면 완충재의 강성은 뜬바닥구조의 균열강도에 큰 영향을 미치며 완충재의 할선계수가 0.2MPa인 경우에 낮은 강도에서 균열이 발생하였다. 또한 슬래브의 단부나 모서리에 하중이 가력될 경우에 균열강도가 감소하였다. 뜬바닥구조를 이루고 있는 마감모르타르는 균열강도에 영향을 주었지만 기포콘크리트는 균열강도에 영향을 주지 않았다.

• Steel and Composite Structures
• /
• 제51권3호
• /
• pp.271-288
• /
• 2024

The primary objective of this study is to investigate the production and performance characteristics of structural concrete incorporating varying proportions (0%, 25%, and 50% by volume) of pumice stone, as well as aluminum lathe as an additive at 0%, 1%, 2%, and 3%, under fire conditions. The experiment will be conducted over a period of up to 1 hour, at temperatures ranging from 24℃, 200℃, 400℃ and 600℃. For the purpose of this, a total of twelve test samples were manufactured, and then tests of compressive strength (CS), splitting tensile strength (STS), and flexural strength (FS) were performed on these samples.Next, a comparison was made between the obtained values and the influence of temperature. To achieve this objective, the manufactured samples were placed at temperatures of 200℃, 400℃, and 600℃ for a duration of 1 hour, and were subjected to the influence of temperature.These values at 24 ℃ were then contrasted with the CS results obtained from test samples that were subjected to the temperature effect for an hour at 200 ℃, 400 ℃, and 600 ℃. A comprehensive analysis of the test outcomes reveals that the incorporation of aluminum lathe wastes into a mixture results in a significant reduction in the compressive strength of the concrete. As a result of this adjustment, the CS values dropped by 32.93%, 45.70%, and 52.07%, respectively. Furthermore, It was shown that testing the ratios of pumice stone alone resulted in a decrease in CS outcomes. Additionally, it was found that the presence of higher temperatures is clearly the primary factor contributing to the decrease in the strength of concrete. Due to elevated temperatures, the CS values decreased by 19.88%, 28.27%, and 38.61% respectively.After this investigation, an equation that explains the connection between CS and STS was provided through the utilization of the data of the experiments that were carried out.

• Earthquakes and Structures
• /
• 제18권3호
• /
• pp.367-377
• /
• 2020

Incremental dynamic analysis (IDA) widely uses for the collapse risk assessment procedures of buildings. In this study, an IDA-based collapse risk assessment methodology is proposed, which employs a novel approach for detecting the near-collapse (NC) limit state. The proposed approach uses the modal pushover analysis results to calculate the maximum inter-story drift ratio of the structure. This value, which is used as the upper-bound limit in the IDA process, depends on the structural characteristics and global seismic responses of the structure. In this paper, steel midrise intermediate moment resisting frames (IMRFs) have selected as case studies, and their collapse risk parameters are evaluated by the suggested methodology. The composite action of a concrete floor slab and steel beams, and the interaction between the infill walls and the frames could change the collapse mechanism of the structure. In this study, the influences of the metal deck floor and autoclaved aerated concrete (AAC) masonry infill walls with uniform distribution are investigated on the seismic collapse risk of the IMRFs using the proposed methodology. The results demonstrate that the suggested modified IDA method can accurately discover the near-collapse limit state. Also, this method leads to much fewer steps and lower calculation costs rather than the current IDA method. Moreover, the results show that the concrete slab and the AAC infill walls can change the collapse parameters of the structure and should be considered in the analytical modeling and the collapse assessment process of the steel mid-rise intermediate moment resisting frames.

• Earthquakes and Structures
• /
• 제25권3호
• /
• pp.149-160
• /
• 2023

Over the course of the last 4-5 years, India's northeastern region have widely used Autoclaved Aerated Concrete (AAC) blocks to construct load-bearing masonry structures. The aim of this investigation is to examine the shear characteristics of AAC masonry triplet assemblage strengthened by using two techniques, i.e., the bead joint (BJ) and the bed-head joint (BHJ) technique. Three unique variations of wire mesh were involved in the strengthening method. Furthermore, three strengthening configurations were used to strengthen each of the three wire mesh variations and the two-strengthening method, i.e. (-), L and (Z) configuration. The unreinforced and reinforced triplet masonry wallets were tested under direct shear test. From the results obtained, the 'BJ'triplet masonry wallets observed an enhanced in shear strength of about 2.23% to 23.33 % whereas the 'BHJ' triplet masonry wallets observed an enhanced in shear strength of about 22.92% to 50.69%. The "BHJ" strengthening method effectively enhance the shear strength of the triplet masonry wallets compared to the "BJ" and the "UR" wallets with an increase in capacity as the wire mesh strength increases. Furthermore, in terms of the strengthening configuration, the (Z) configuration performs better, followed by the (L) and (-) configuration demonstrating the strengthening configuration effectiveness.

• Earthquakes and Structures
• /
• 제26권5호
• /
• pp.363-382
• /
• 2024

In India's north-eastern region, low-strength autoclaved aerated concrete (AAC) blocks are widely used for constructing masonry structures, making them susceptible to lateral forces due to their low tensile and shear strengths and brittleness nature. The absence of earthquake-resistant attributes further compromises their resilience during seismic events. An economically viable solution to enhance the structural integrity of these masonry structures involves integrating steel wire mesh within the masonry mortar joints. This study investigates the in-plane shear behaviour of AAC masonry by employing two approaches: incorporating steel wire mesh within the masonry bed joint "BJ" and the masonry bed and head joint "BHJ". These approaches aim to augment strength and ductility, potentially serving as earthquake-resistant attributes in masonry structures. Three distinct variations of steel wire mesh and three reinforcing arrangements, i.e. (-), (L) and (Z) arrangement were employed to reinforce the two approaches. The test result reveals a significant enhancement in structural performance upon inclusion of steel wire mesh in both reinforcing approaches, with the "BHJ" approach outperforming the "BJ" approach and the unreinforced masonry, along with increase in capacity as the wire mesh size increases. Furthermore, the effectiveness of the reinforcing arrangement is ranked with the (Z) arrangement showing the largest performance, followed by the (L) and (-) arrangement.

• 한국환경농학회지
• /
• 제13권2호
• /
• pp.223-230
• /
• 1994

고형(固形) 축산폐기물(畜産廢棄物)에 의한 농업환경(農業環境) 오염(汚染)을 줄이고 폐기물(廢棄物) 중에 함유된 식물(植物)에 유용한 양분물질(養分物質)의 효율적(效率的)인 재활용(再活用)을 위하여 중(中), 소규모(小規模) 양돈농가에서 비닐하우스 돈분(豚糞)건조발효 복합시설을 개발(開發)하여 적용 가능성과 효율을 구명하고자 농가 실증시험(實證試驗)을 수행하였다. 건조상(乾燥床)은 원형(圓形) 콘크리트 바닥형태를 적용하였고 돈분(豚糞)의 교반(攪拌)은 기계식(機械式) 교반기(攪拌機)를 이용하였으며 건조상(乾燥床)에서 수분이 감소된 돈분(豚糞)의 발효(醱酵)를 위하여 2조(組) 1식(式)의 송풍식(送風式) 발효상(醱酵床)으로 구성된 건조(乾燥), 발효시설(醱酵施設)에서 시험을 수행하여 얻어진 결과(結果)는 다음과 같다. 기온(氣溫)이 높은 계절에는 기계식(機械式) 교반기(攪拌機)를 이용한 건조상(乾燥床)에서 최초투입(最初投入)되는 돈분(豚糞)의 수분함량이 70-80%였던 것이 건조상(乾燥床)을 통과하여 발효상(醱酵床)에 투입되는 단계에서의 분분(糞糞) 수분함양(水分含量)은 발효(醱酵)에 적합한 45-65%에 달하였으나 기온(氣溫)이 낮아질수록 건조상(乾燥床)에서의 교반(攪拌)에 의한 수분제거률(水分除去率)이 감소되었다. 돈분건조시(豚糞乾燥時) 수분조절제(水分調節劑)로 이미 건조(乾燥)된 돈분(豚糞)을 부재료(副材料)로 사용하였을 때 수분감소률(水分減少率)은 52.1%로 생돈분(生豚糞)만을 건조(乾燥)하였을 때에 수분감소율(水分減少率) 19.7%에 비하여 수분제거(水分除去) 효과(效果)는 32.4% 증가(增加)한 결과(結果)를 보였다. 생돈분(生豚糞)과 건조돈분(乾燥豚糞) 간의 건조기간(乾燥期間) 경과(經過)에 따른 돈분(豚糞) 중 화학성분(化學成分) 함량간(含量間)에는 큰 차이가 없이 유사(類似)한 경향을 보였으며 $P_2O_5$ 함양(含量)은 생돈분(生豚糞)에 비하여 건조돈분(乾燥豚糞)에서 경미(輕微)하게 높은 경향을 보였다. 그리고 생돈분(生豚糞)과 건조돈분(乾燥豚糞) 중 무기성분(無機成分) 함량(含量)도 큰 차이가 없었으며 성분별(成分別)로 볼때 CaO가 가장 높았고 다음이 $K_2O$, MgO, $Na_2O$였다. 돈분(豚糞)을 건조(乾燥)함에 따른 미생물(微生物) 밀도(密度)는 생돈분(生豚糞)에 비하여 건조돈분(乾燥豚糞)에서 E. coli 141.9배(倍) 그리고 Streptococci는 236.2배(倍)가 감소(減少)하였다. 돈분(豚糞) 건조(乾燥), 발효복합시설(醱酵複合施設)의 총비용(總費用)은 4,185,630원이었으며 본(本) 건조시설운용비(乾燥施設運用費)는 190,000원/년으(年)로 두당(頭當) 건조시설(乾燥施設) 관리 소요경비(所要經費)는 985원(200두(頭) 기준(基準))였다.