• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.424-431
• /
• 2003

This report was studied about the advanced transit system for operating in oversea country and state of construction in the domestic. And we suggested the improvement policy against the major problems due to delay to operation and construction of advanced transit system in each cities of local self Government.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1266-1273
• /
• 2004

Urban railway signaling system is for train operation with safety in the urban crowded area, that has been increasing the demand of use of advanced train control systems with safe. European Commission is supporting the UGTMS(Urban Guided Transport Management System) project for the research and development. The main objective of UGTMS is to provide the European urban guided transport sector (comprising metro, tram and light rail systems) with a common Management System. A key topic is the extent to which the specifications for the successful ERTMS(European Rail Transport Management System) can be adapted to UGTMS needs. Beyond this, it is necessary to define the relevant functional and system requirements for all types of urban guided transport management systems in order to improve interoperability and intermodality. Also to be explored are the prospects for open system standards. In this article, we look into the trend of the standardization through the UGTMS project in Europe and consider any benefit to the project of the standardization for the urban railway signaling system in Korea.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.522-527
• /
• 2004

Nowadays, becoming wide area is going on over Seoul Metropolitan area. But urban railway, very important traffic facilities, is operated in normal operating position and it gives cause to week the function of commuting long distance. This paper is focus on studying the feasibility of rapid operation system in Seoul Metropolitan area through comparing the present state of urban railway in Seoul Metropolitan area with a case of the advanced facilities in developed country. And we develop rapid operation system in general aspect through only consideration of operation planning without improvement of facilities. Also, we come up with new concept of rapid operation system through investigation of limits of the preceding researches

• 한국철도학회논문집
• /
• 제17권1호
• /
• pp.79-85
• /
• 2014

본 논문은 도시형 신교통시스템 도입 계획단계에서 적정 신교통시스템을 용이하게 선정하기 위해 대중교통수단의 다양한 특성들에 대한 중요도를 고려하는 평가기법을 제시하고 있다. 이 기법은 대중교통수단의 특성을 이용자 영향요인, 지역사회 영향요인, 정부 및 운영자 영향요인으로 구분하여 총 12개의 평가항목을 설정하고, 이에 대한 중요도를 분석하여 신교통시스템을 평가하는 기법이다. 실증적 분석을 위해 AHP 기법을 이용하여 중소도시의 간선형 신교통시스템에 대한 가중치를 조사하여 평가를 시행한 결과, 중요도는 안전성, 신속 및 정시성, 편리성, 지역활성화 순으로, 우선순위는 철재차륜 AGT, LIM, 고무차륜 AGT 순으로 분석되었다.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.404-410
• /
• 2016

This paper proposed a program of an energy storage system(ESS) for peak shaving of high-speed railway substations The peak shaving saves cost of equipment and demand cost of the substation. To reduce the peak load, it is very important to know when the peak load appears. The past data based load profile forecasting method is easy and applicable to customers which have relatively fixed load profiles. And an optimal scheduling method of the ESS is helpful in reducing the electricity tariff and shaving the peak load efficiently. Based on these techniques, MS. NET based peak shaving program is developed. In case study, a specific daily load profile of the local substation was applied and simulated to verify performance of the proposed program.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.27-34
• /
• 2014

The paper proposed a sizing method of an energy storage system(ESS) for peak shaving of high-speed railway substations based on load profile patterns of substations. A lithium based battery ESS was selected since it can produce high-power at high speed that peak shaving requires, and also takes up a relatively smaller space for installation. Adequate size of the ESS, minimum capacity which can technically meet a peak shaving target, was determined by collectively considering load patterns of a target substation, characteristics of the ESS to be installed, and optimal scheduling of the ESS. In case study, a local substation was considered to demonstrate the proposed sizing method. Also economic analysis with the determined size of ESS was performed to calculate electricity cost savings of the peak shaving ESS, and to offer pay-back period and return on investment.

• 한국철도학회논문집
• /
• 제8권1호
• /
• pp.1-5
• /
• 2005

This paper has presented the parallel cyclic redundancy check (CRC) technique that performs CRC computation in parallel superior to the conventional CRC technique that processes data bits serially. Also, it has showed that the implemented parallel CRC circuit has been successfully applied to the inductively coupled passive RFTD system working at a frequency of 13.56㎒ in order to process the detection of logical faults more fast and the system has been verified experimentally. In comparison with previous works, the proposed RFID system using the parallel CRC technique has been shown to reduce the latency and increase the data processing rates about 15％ In the results. Therefore, it seems reasonable to conclude that the parallel CRC realization in the RFID system offers a means of maintaining the integrity of data in the high speed RFID system.

• 한국지반환경공학회 논문집
• /
• 제19권9호
• /
• pp.13-19
• /
• 2018

최근 우리나라는 도시의 노후화가 가속되며 사회기반시설에 대한 다양한 문제점들이 발생하고 있다. 이에 영향을 받는 도시철도 구조물 또한 노후화가 가속되면서 시민들의 불안감은 커지고 있어 이에 대한 연구의 필요성이 제기되고 있다. 도시철도 구조물은 시민의 안전과 밀접하게 연관되어 있어 이상 현상을 신속히 발견하여 처리해야 한다. 도시철도 지하구조물의 경우, 선로에 변형률 게이지를 부착하거나 광섬유 센서인 브래그 격자 센서를 활용하여 측정하고 있다. 그러나 이러한 방식은 장거리 모니터링에는 용이하지만 공간 분해능이 떨어져 이상구간을 정밀하게 측정하는 데에는 한계가 있다. 따라서 본 연구에서는 브릴루앙 광 상관영역 기반(Brillouin Optical Correlation Domain Analysis; BOCDA)의 분포형 광섬유 센서 시스템을 구축하여 도시철도 지하구조물인 궤도에 관한 모니터링 적용성 평가를 수행하였다. 구축된 BOCDA 기반의 고분해능 분포형 광섬유 센서 시스템은 공간분해능 10, 20, 50, 100cm이며 측정거리 2km 구간에 대해 상시 모니터링 및 특정 위치에 대해 모니터링이 가능하다. 철도 폐선부지에 광섬유를 약 250m 포설하여 상시 모니터링에 대한 적용성을 평가하였으며, 윤중 시험기를 사용하여 특정위치에 대한 모니터링 적용성을 평가하였다. 시험결과, 공간분해능 1.0m에서 0.1m로 낮아질수록 손실이 커지는 경향을 보이고 있으며, 공간분해능이 낮을수록 측정 속도는 감소하지만 위치 및 변형에 대한 정확한 데이터를 얻을 수 있었다. 추후, 포설방법이 해결된다면 다양한 구조물의 모니터링에 활용될 수 있을 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.921-927
• /
• 2005

Concurrent engineering is considered in the 21st century product development and H&D. Moreover, advancements in IT and advanced system engineering technology enables to produce high-quality article and shorten the period of R&D. The paper propose work breakdown structure(WBS) based on the product data management(PDM), WEB based system engineering technique, to introduce and operate advanced system engineering technique. We will manage systematically all data produced in advanced urban transit system project based on the proposed WBS. Besides, we provide strategic information for improving efficiency of R&D in advanced urban transit system project. Futhermore, we manage data such as images, design drawings, documents as well as numerical data, and will establish PDM system for sharing the data.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.705-709
• /
• 2007

This paper introduced the system characteristics of advanced EMU to be applied in urban transit system after 2010. The system characteristics are improvements of vehicle efficiency, implementation of lightweight vehicle body, improvements of passenger's convenience, facilities for handicapped people, improvements of system reliability, strengthening national competitiveness.