• 전기학회논문지P
• /
• 제59권2호
• /
• pp.185-190
• /
• 2010

This paper presents the estimation on switching technique via output power source analysis of power conversion unit in electric railway vehicle. The focus of this study suggested an alternative on critical problems by using head electric power(HEP). To achieve this, we have measured output power of HEP, and measurement devices set up at output of transformer connected HEP to analysis quality on output power source of head electric power(HEP) unit in electric railway vehicle. Using results of measurement of it, parameters are assumed for simulation to confirm estimation on switching technique. It is confirmed that switching technique is Selected Harmonic Elimination PWM(SHEPWM) and inverter switching frequency is less than 500[Hz]. Throughout experiment and simulation, it is estimated that switching technique used HEP is advanced SHEPWM and switching frequency is about 300[Hz]. Also leakage inductance in transformer is about $180[{\mu}H]$ less than $365[{\mu}H]$ known.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.456-461
• /
• 2011

Recently the design specification has been advanced with preventing earthquake disaster in Korea because of increasing occurrence of large size earthquake. A composite plate with ductile fiber is proposed, which can enhance the performance of built tunnel in both strength and ductility. This study is to focus to verify the effect of strengthening of existing tunnels which is built without earthquake type load scenario, so that it can provide the safety of existing urban subway system against earthquakes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.58-62
• /
• 1989

Magnetic levitation railway is being developed as an advanced ground transport system which is high speed and has less environmental pollution. In this paper, the effectiveness of the proposed controller is proved by a vehicle body's curvature running characteristics. We select two types of transition curves for investigation, namely clothoid and sine.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.617-623
• /
• 2020

다수의 승객을 운송하는 도시철도 전동차는 도시 철도교통시스템의 핵심이다. 따라서 차량의 동적성능이 확보가 차량 안전 확보 및 승객서비스 차원에서 선행되어야 한다. 철도차량의 진동, 승차감과 같은 동적거동은 현가시스템 구조 및 현가요소에 따라 크게 영향을 받는다. 철도차량의 현가시스템은 윤축과 대차간 1차현가시스템, 대차와 차체간 2차현가시스템으로 구성되어 있다. 본 논문에서는 국내에서 운용되고 있는 전동차 현가구조에 따른 전동차의 동적거동에 대하여 분석하고자 한다. 현가구조가 상이한 2종류의 전동차에 대하여 실제 선로에서 동일 주행조건으로 주행시험을 수행하였으며 차량의 진동을 계측하였고 진동과 승차감, 진동감쇠율과 같은 동적거동 특성을 분석하였다. 시험결과, 차체 진동성능은 좌우방향은 B대차가, 상하방향은 A대차가 상대적으로 우수하게 나타났다. 승차감은 전반적으로 A대차가 B대차에 비하여 우수하게 나타났다. 진동감쇠율을 보면, 1차현가시스템은 고무스프링이 적용된 A대차에 비하여 코일스프링이 적용된 B대차의 진동감쇠 성능이 우수하며 2차현가시스템은 코일스프링에 비하여 공기스프링이 적용된 A대차의 진동감쇠 성능이 우수하다. 본 논문의 결과는 향후 철도차량 신차 설계 과정에서 현가구조 설계 및 현가요소 선정 시, 유용한 자료로 활용될 것이라 기대된다.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.101-109
• /
• 2012

It is commonly recognized that railway is one of the representative transportation and it offers public service based on strategies for being rapid, automation, safety. Since the opening of high speed railway, 3-hundred-million people have used it and acknowledged its efficiency. However, derailed accident at Kwangmyeong station in February, 2011, frequent malfunction of KTX-Sancheon, and accidents by engineer's careless fault damaged on credibility of safety, Especially, spreaded accidents through social networking service by cell phones amplified anxiety of public, being criticized by the press. This study analyzed statistics of past accident and cases of passing-by accident, and surveyed 152 KTX captain engineers about their recognition of the accident by careless fault and experiences of possibility of occurrence for preventing engineer's careless fault and restoring trust According to the analysis, engineers worry about responsibility and disadvantages related to the accidents for the most, and they are nervous about malfunction for the second most. This study presents prevention methods regarding the result. First, it is required to improve mental stability and concentration on their work, secondly, advanced ability to cope with malfunction or error through repetitive education and training are required to increase confidence, and for the last, improvement of operational supporting system such as ATP, GPS to prevent errors by human factors. Improvement of the system is expected to lead engineers to prevent careless fault and regain the reputation of railway.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.982-989
• /
• 2005

Safety of the Train Control System become more important along with the progress of the computer and the technology of communications in these days. Safety of the Train Traffic Control System needs an accurate analysis of the Hazard to reduce losses of a property and lives. Many of advanced railroad nations already had established safety standards when they set the system even considering scrap of railroad and put a great concern on developing safety system which is getting larger and more complicate. Domestic railroad system has to introduce improved technology and systematically prepare and make a scientific survey to achieve unparalleled reliability and safety as well. In this Study, ITCC CTC System will show the research and the analysis of the hazard to ensure the safety of software.

• 한국철도학회논문집
• /
• 제19권4호
• /
• pp.417-426
• /
• 2016

본 연구에서는 AZ61 압출 판재 마찰교반용접부의 기계적 강도 평가와 미세조직 평가를 수행하여 최적의 용접조건을 도출하였다. 용접조건은 용접 툴의 회전속도 400, 600, 800rpm, 이송속도 200, 300, 400mm/min으로 선정하였다. 인장시험 및 경도시험을 통해서 용접부의 기계적 강도 평가를 하였으며, 파단면 관찰과 용접부 단면 미세조직 관찰을 통해서 용접부의 결함 유무를 확인하였다. 용접부 특성 평가 결과 본 연구에서 제시한 용접조건 내에서 AZ61 압출 판재의 최적용접조건은 회전속도 800rpm, 이송속도 200mm/min이었고, 용접부의 인장강도, 항복강도 그리고 연신율은 모재 대비 79.0%, 65.4%, 30.1%로 측정되었다.

• 조명전기설비학회논문지
• /
• 제22권2호
• /
• pp.71-79
• /
• 2008

철도 고압배전선로의 경우 궤도를 따라 양방향으로 선로연변에 통신 및 신호설비와 병행하여 가공 또는 지중선로로 설치되어 있다. 가공선로의 경우에는 대기중에 노출되어 있어 뇌격, 폭풍우, 염해 등 자연현상으로 인한 고장발생이 다수 발생하고 있으며, 이에 따른 보호장치의 오 부동작이 빈번하게 발생하고 있다. 철도 고압배전선로에서 발생하는 사고 중 가장 많은 것은 1선 지락이지만 이밖에 선간 단락, 심할 경우에는 3선 지락(단락)으로까지 진전되는 사고가 있을 뿐만 아니라 단선 사고까지 발생하는 경우도 있다. 따라서 사고를 방지하기 위해서는 보다 상세한 점검보수가 필요하며, 고장발생시 조기발견과 신속한 고장처리는 철도안전수송에 중요하다. 본 논문에서는 철도 고압배전계통의 주류를 이루게 될 22.9[kV] 직접접지 계통을 대상으로 고장 발생시 고장 위치를 신속하게 표정할 수 있는 고장점 표정 알고리즘 개발을 위해 22.9[kV] 고압배전계통을 모델링 하여 특성해석과 고장해석을 수행하였고, 정확한 고장점 표정이 가능한 반복계산법을 이용한 알고리즘을 제시하였으며, 사례연구를 통해 성능을 입증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1235-1240
• /
• 2004

This paper has presented the parallel cyclic redundancy check (CRC) technique that performs CRC computation in parallel superior to the conventional CRC technique that processes data bits serially. Also, it has showed that the implemented parallel CRC circuit had been successfully applied to the inductively coupled passive RFID system working at a frequency of 13.56MHz in order to process the detection of logical faults more fast and the system had been verified experimentally. In comparison with previous works, the proposed RFID system using the parallel CRC technique has been shown to reduce the latency and increase the data processing rates in the results. Therefore, it seems reasonable to conclude that the parallel CRC realization in the RFID system offers a means of maintaining the integrity of data in the high speed RFID system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.854-861
• /
• 2004

LRT(Light Rail Transit System) is devided into steel-wheel train, LIM and rubber tired AGT(Automated Guide-way Transit System) The main features of LRT are low construction cost, low space, low noise, Environment-friendly, fastly, low maintenance cost. it's a civil transit transfer system of new generation became popular advanced nation. In this study, the beginning designed manufactureing rubber tired AGT turnout and guide-way system for the field application. We hope reliability for the system shall home production of turnout and guide-way