• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.37-42
• /
• 2012

LIFT (laser-induced forward transfer) is an advanced laser processing method used for selectively transferring micron-sized objects. In our study, this process was applied in order to deposit solder balls in microsystem packaging processes for electronics. Locally melted solder paste could be transferred to a rigid substrate using laser pulses. A thin glass plate with a solder cream layer was used as a donor film, and an IR laser pulse (wavelength = 1070 nm) was used to transfer a micron-sized solder ball to the receptor. Mass balance and energy balance were applied to analyze the shape and temperature profiles of the solder paste drops. The transferred solder bumps had measured diameters of 30-40 ${\mu}m$ and thicknesses of 50 ${\mu}m$ in our experiment. The limits and applications of this method are also presented.

• Elastomers and Composites
• /
• v.34 no.2
• /
• pp.113-120
• /
• 1999

Nobody doubts to say that one of the most important performance polymers is a conductive polymer. The manufacturing process of the commercial conductive polymers has been known by mixing with the conductive materials, but it doesn't noticeably appear of a conductive function. One of the reasons is the lack of comprehension In compounding a carbon black with polymer rosins. This paper involves the understanding of compounding technology of the conductive carbon black filled composite. Our experimental results indicate that the fibrous shaped carbon black was hard to process but appeared of a superior conductivity compared to a stick or a sphelulite shaped carbon black. Therefore, it was processed with a processing oil in compounding, which led to a better processability and a better conductivity. This study was accomplished that the solution process compared to the melting process.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.4
• /
• pp.301-311
• /
• 2016

This paper describes the whole procedures to determine ice-induced global loads on the ship using measured full-scale data in accordance with the method proposed by the Canadian Hydraulics Centre of the National Research Council of Canada. Ship motions of 6 degrees of freedom (dof) are found by processing the commercial sensor signals named Motion Pak II under the assumption of rigid body motion. Linear accelerations as well as angular rates were measured by Motion Pak II data. To eliminate the noise of the measured data and the staircase signals due to the resolution of the sensor, a band pass filter that passes frequencies between 0.001 and 0.6 Hz and cubic spline interpolation resampling had been applied. 6 dof motions were computed by the integrating and/or differentiating the filtered signals. Added mass and damping force of the ship had been computed by the 3-dimensional panel method under the assumption of zero frequency. Once the coefficients of hydrodynamic and hydrostatic data as well as all the 6 dof motion data had been obtained, global ice loads can be computed by solving the fully coupled 6 dof equations of motion. Full-scale data were acquired while the ARAON rammed old ice floes in the high Arctic. Estimated ice impact forces for two representative events showed 7e15 MN when ship operated in heavy ice conditions.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.29 no.4
• /
• pp.150-160
• /
• 2018

Objectives: This study investigated the effect of social skills training (SST) on facial emotion recognition and discrimination in children with attention-deficit/hyperactivity disorder (ADHD) and autism spectrum disorder (ASD). Methods: Twenty-three children aged 7 to 10 years participated in our SST. They included 15 children diagnosed with ADHD and 8 with ASD. The participants' parents completed the Korean version of the Child Behavior Checklist (K-CBCL), the ADHD Rating Scale, and Conner's Scale at baseline and post-treatment. The participants completed the Korean Wechsler Intelligence Scale for Children-IV (K-WISC-IV) and the Advanced Test of Attention at baseline and the Penn Emotion Recognition and Discrimination Task at baseline and post-treatment. Results: No significant changes in facial emotion recognition and discrimination occurred in either group before and after SST. However, when controlling for the processing speed of K-WISC and the social subscale of K-CBCL, the ADHD group showed more improvement in total (p=0.049), female (p=0.039), sad (p=0.002), mild (p=0.015), female extreme (p=0.005), male mild (p=0.038), and Caucasian (p=0.004) facial expressions than did the ASD group. Conclusion: SST improved facial expression recognition for children with ADHD more effectively than it did for children with ASD, in whom additional training to help emotion recognition and discrimination is needed.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.26 no.3
• /
• pp.183-189
• /
• 2015

Objectives : The aim of this study was to investigate Korean Wechsler Intelligence profiles and specific abilities related to attention problem of children with attention-deficit hyperactivity disorder (ADHD). Methods : The Korean Wechsler Intelligence Scale for Children-fourth edition (K-WISC-IV) and Advanced Test of Attention (ATA) were administered to 91 children and adolescents (age $8.5{\pm}2.6$ years, 73 boys) with ADHD. Pearson correlation and independent t-tests were used. Results : The means of Working Memory Index (WMI) and Processing Speed Index (PSI) showed a score of low average in K-WISC-IV. WMI scores for the K-WISC-IV showed clinically significant correlations with omission errors, commission errors, and response time variability on auditory ATA. PSI scores also showed significant correlations with response time and variability on visual ATA. In addition, significantly lower digit span backward scores were observed in hyperactive-impulsive/combined subtypes compared to inattentive subtype (t=3.60, p<.001). Conclusion : Children with ADHD showed significantly lower scores in WMI and PSI which were clinically correlated with ATA scores, and hyperactive-impulsive/combined subtypes showed poorer working memory functions in WMI. Follow-up studies are proposed.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.618-622
• /
• 2009

The new candidates for OTFTs, which were composed of naphthalene, anthracene, benzo[1,2-b:4,5-b’]dithiophene and 2-decylbithiophene end-capper were synthesized under Suzuki coupling reaction conditions. All of the oligomers were characterized by FT-IR, mass analysis, UV-vis, PL spectrum, cyclic voltametry (CV), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), $^1H-NMR\;and\;^{13}C-NMR$. Investigation of physical properties showed that all of the oligomers have higher oxidation potential and good thermal stability. Especially, DBT-DtB-DBT is soluble in common solvents and suitable for low cost processing technologies.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.1
• /
• pp.25-31
• /
• 2010

PURPOSE. This study compared the accuracy of an abutment-framework (A-F) taken with open tray impression technique combining cement-on crown abutments, a metal framework and resin cement to closed tray and resin-splinted open tray impression techniques for the 3-implant definitive casts. The effect of angulation on the accuracy of these 3 techniques was also evaluated. MATERIAL AND METHODS. Three definitive casts, each with 3 linearly positioned implant analogs at relative angulations 0, 30, and 40 degrees, were fabricated with passively fitted corresponding reference frameworks. Ten impressions were made and poured, using each of the 3 techniques on each of the 3 definitive casts. To record the vertical gap between reference frameworks and analogs in duplicate casts, a light microscope with image processing was used. Data were analyzed by two-way analysis of variance and the Tukey test. RESULTS. The open tray techniques showed significantly smaller vertical gaps compare to closed tray technique (P < .05). The closed tray and the resin-splinted open tray technique showed significantly different vertical gaps according to the angulation of implant (P < .05), but the A-F impression technique did not (P > .05). CONCLUSION. The accuracy of the A-F impression technique was superior to that of conventional techniques, and was not affected by the angulation of the implants.

• Journal of Adhesion and Interface
• /
• v.3 no.4
• /
• pp.44-52
• /
• 2002

Composite materials are created by combining two or more component to achieve desired properties which could not be obtained with the separate components. The use of reinforcing fillers, which can reduce material costs and improve certain properties, is increasing in thermoplastic polymer composites. Currently, various inorganic fillers such as talc, mica, clay, glass fiber and calcium carbonate are being incorporated into thermoplastic composites. Nevertheless, lignocellulose fibers have drawn attention due to their abundant availability, low cost and renewable nature. In recent, interest has grown in composites made from lignocellulose fiber in thermoplastic polymer matrices, particularly for low cost/high volume applications. In addition to high specific properties, lignocellulose fibers offer a number of benefits for lignocellulose fiber/thermoplastic polymer composites. These include low hardness, which minimize abrasion of the equipment during processing, relatively low density, biodegradability, and low cost on a unit-volume basis. In spite of the advantage mentioned above, the use of lignocellulose fibers in thermoplastic polymer composites has been plagued by difficulties in obtaining good dispersion and strong interfacial adhesion because lignocellulose fiber is hydrophilic and thermoplastic polymer is hydrophobic. The application of lignocellulose fibers as reinforcements in composite materials requires, just as for glass-fiber reinforced composites, a strong adhesion between the fiber and the matrix regardless of whether a traditional polymer matrix, a biodegradable polymer matrix or cement is used. Further this article gives a survey about physical and chemical treatment methods which improve the fiber matrix adhesion, their results and effects on the physical properties of composites. Coupling agents in lignocellulose fiber and polymer composites play a very important role in improving the compatibility and adhesion between polar lignocellulose fiber and non-polar polymeric matrices. In this article, we also review various kinds of coupling agent and interfacial mechanism or phenomena between lignocellulose fiber and thermoplastic polymer.

• Journal of Ginseng Research
• /
• v.41 no.1
• /
• pp.85-95
• /
• 2017

Background: American ginseng (Panax quinquefolius L.) and Asian ginseng (Panax ginseng Meyer) products, such as slices, have a similar appearance, but they have significantly different prices, leading to widespread adulteration in the commercial market. Their aroma characteristics are attracting increasing attention and are supposed to be effective and nondestructive markers to determine adulteration. Methods: The aroma characteristics of American and Asian ginseng were investigated using gas chromatography-mass spectrometry(GC-MS) and an electronic nose (E-nose). Their volatile organic compounds were separated, classified, compared, and analyzed with different pattern recognition. Results: The E-nose showed a good performance in grouping with a principle component analysis explaining 94.45% of variance. A total of 69 aroma components were identified by GC-MS, with 35.6% common components and 64.6% special ingredients between the two ginsengs. It was observed that the components and the number of terpenes and alcohols were markedly different, indicating possible reasons for their difference. The results of pattern recognition confirmed that the E-nose processing result is similar to that of GC-MS. The interrelation between aroma constituents and sensors indicated that special sensors were highly related to some terpenes and alcohols. Accordingly, the contents of selected constituents were accurately predicted by corresponding sensors with most $R^2$ reaching 90%. Conclusion: Combined with advanced chemometrics, the E-nose is capable of discriminating between American and Asian ginseng in both qualitative and quantitative angles, presenting an accurate, rapid, and nondestructive reference approach.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.79-88
• /
• 2015

This paper introduces surveillance equipment "ADS-B", the core subject of traffic control system and study of ADS-B 1090ES ground receiver. The standard is set not only for functional but also its reliability by analyzing international standard documents and existing products. The Bias circuit is designed for less power consumption, low noise and high gain for RF module. The signal processing is capable of overcoming its bad conditions. MCU part is configured with the latest CPU for high speed communication with external parts and SNMP is selected for remote control communication. The performance of developed receiver satisfies national and international standards and its functions are more advanced compared to foreign receivers.