• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.929-938
• /
• 2015

Maximum power point tracking (MPPT) and battery charging control are two important functions for a solar battery charger. The former improves utilization of the available solar energy, while the latter ensures a prolonged battery life. Nevertheless, complete implementation of both functions can be complex and costly, especially for low voltage application such as standalone street lamps. In this paper, the operation of a solar battery charger for standalone street light systems is investigated. Using only one voltage sensor, the solar charger is able to operate in both MPPT and constant voltage (CV) charging mode, hence providing high performance at a low cost. Using a lab prototype and a solar simulator, the operation of the charger system is demonstrated and its performance under varying irradiance is validated.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.564-566
• /
• 2012

무선 센서 네트워크에서 관심지역이 배치된 센서들에 의하여 모두 관측되고 이의 데이터가 싱크노드까지 전달되는 동시에 네트워크의 수명을 최대화하도록 센서들을 배치하는 연구는 중요하다. 본 논문에서는 센서 에너지 소모의 균등화를 통해 네트워크 수명의 최대화를 이루기 위해 불균등 분포를 따르면서 네트워크의 기능이 올바르게 동작할 수 있도록 하는 센서의 배치 패턴을 제시한다.

• Journal of Hydrogen and New Energy
• /
• v.8 no.4
• /
• pp.145-154
• /
• 1997

The $H_2$ and $H_2S$ sensing characteristics of Pd and Pd-Rh gate MOS sensor and the effect of Pd deposition condition on the hydrogen sensing performance of Pd gate MOS sensor was investigated. The increase of rf power and deposition temperature led to the decrease in the sensitivity and the initial response rate. The deposition temperature gave more effects on the decrease of the sensitivity and the initial response rate than the rf power. The sensitivity of Pd-Rh sensor gave better performance than pure Pd sensor. As the concentration of Rh in the gate increased, the sensitivity decreased. For Pd-Rh sensor, the sensitivity to $H_2$ was higher than that to $H_2S$. It was demonstrated that rf power, deposition temperature had an important role in the sensor performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.567-568
• /
• 2018

In recent years, there have been frequent occurrences of collapsing buildings and tilting accidents due to frequent earthquakes and aging of buildings. Various methods have been proposed to prevent disasters on these buildings. In this paper, we propose a system algorithm that provides an indication of anomalous phenomena such as collapse and tilting of buildings by real - time monitoring of IoT (Internet of Things) - based architectural anomalies. The multi-advanced sensor is based on the Inclinometer sensor and the Accelerometer sensor, transmits the detected data to the server in real time, accumulates the data, and provides the service to cope when the set threshold value is different. It is possible to evacuate and repair the collapse and tilting of the building by warning the occurrence of the upper threshold event event such as the collapse and tilting of the building.

• Journal of the Korean Vacuum Society
• /
• v.9 no.2
• /
• pp.99-101
• /
• 2000

The fabrication of the submicron size hole has been interesting due to the potential application of the near field optical sensor or liquid metal ion source. The 2 micron size dot array was photolithographically patterned. After formation of the V-groove shape by anisotropic KOH etching, dry oxidation at $1000^{\circ}C$ for 600 minutes was followed. In this procedure, the orientation dependent oxide growth was performed to have an etch-mask for dry etching. The reactive ion etching by the inductively coupled plasma (ICP) system was performed in order to etch ~90 nm $SiO_2$ layer at the bottom of the V-groove and to etch the Si at the bottom. The negative ion energy would enhance the anisotropic etching by the $Cl_2$ gas. After etching, the remaining thickness of the oxide on the Si(111) surface was measured to be ~130 nm by scanning electron microscopy. The etched Si aperture can be used for NSOM sensor.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.607-614
• /
• 2013

In this study, effect of the sensor gain error is theoretically analyzed and simulated when mixed sequential two-prove method(MTPM) is applied for the precision measurement of straightness error of a linear motion table. According to the theoretical analysis, difference of the gain errors between two displacement sensors increases measurement error dramatically and alignment error of the straightedge is also amplified by the sensor gain difference. On the other hand, if the gain errors of the two sensors are identical, most of error terms are cancelled out and the alignment error doesn't give any influence on the measurement error. Also the measurement error of the straightness error is minimized compared with that of the straightedge's form error owing to close relationship between straightness error and angular motion error of the table in the error terms.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1966-1971
• /
• 2004

As the remote sensing satellite technology grows, the acquisition of accurate attitude and position information of the satellite has become more and more important. Due to the data processing limitation of the on-board orbit propagator and attitude determination algorithm, it is required to develop much more accurate orbit and attitude determination, which are so called POD (precision orbit determination) and PAD (precision attitude determination) techniques. The sensor and attitude dynamics simulation takes a great part in developing a PAD algorithm for two reasons: 1. when a PAD algorithm is developed before the launch, realistic sensor data are not available, and 2. reference attitude data are necessary for the performance verification of a PAD algorithm. A realistic attitude dynamics and sensor (IRU and star tracker) outputs simulation considering their physical characteristics are presented in this paper, which is planned to be used for a PAD algorithm development, test and performance verification.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.237-244
• /
• 2016

There are two destinations to aware the risk of common life. Recognition of the condition of pedestrian's own and the environmental factor awareness both are beneficial for risk awareness. It is good way of advancing the crime prevention effectivity that including IoT technology at the crime prevention research. The purpose of this research is that advanced way of crime prevention with multi-sensor data fusion of the condition of pedestrian and environmental factors. The 3-axis acceleration sensor is available to recognize the gait and the illumination sensor also useful to infer the road state. This research suggest a novel way of assess these factors and the result is the degree of danger.

• Carbon letters
• /
• v.14 no.3
• /
• pp.186-189
• /
• 2013

We report a highly sensitive $NO_2$ gas sensor based on multi-layer graphene (MLG) films synthesized by a chemical vapor deposition method on a microheater-embedded flexible substrate. The MLG could detect low-concentration $NO_2$ even at sub-ppm (<200 ppb) levels. It also exhibited a high resistance change of ~6% when it was exposed to 1 ppm $NO_2$ gas at room temperature for 1 min. The exceptionally high sensitivity could be attributed to the large number of $NO_2$ molecule adsorption sites on the MLG due to its a large surface area and various defect-sites, and to the high mobility of carriers transferred between the MLG films and the adsorbed gas molecules. Although desorption of the $NO_2$ molecules was slow, it could be enhanced by an additional annealing process using an embedded Au microheater. The outstanding mechanical flexibility of the graphene film ensures the stable sensing response of the device under extreme bending stress. Our large-scale and easily reproducible MLG films can provide a proof-of-concept for future flexible $NO_2$ gas sensor devices.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.5
• /
• pp.566-572
• /
• 2014

Recently, indoor navigation has been applied in large convention centers by using wireless sensor networks (WSNs), which provide not only a user's path to be traveled but also orientation and shopping information to increase user's convenience. This paper presents the localization system for estimating relative coordinates without pre-deployment of the reference node based on ultra wide band (UWB) ranging system, which is relatively suitable for indoor localization compared to other wireless communications, and azimuth sensor. The proposed localization system which consists of an azimuth sensor and a mobile node composed of three nodes estimates relative coordinates of the reference node without applying any recursive and time consumption algorithms. Also, in the process of estimating relative coordinates of the reference node, ranging errors are minimized through the proposed technique and the number of nodes can be reduced. Experimental results show the feasibility and validity of the proposed system.