• 제목/요약/키워드: Advanced Effectiveness

검색결과 1,358건 처리시간 0.028초

민간경비 자격검정 개선방안에 관한 연구 (A Study on Developing Qualification Criteria in the Private Security Industry)

  • 최정택
    • 시큐리티연구
    • /
    • 제18호
    • /
    • pp.143-167
    • /
    • 2009
  • 21세기에 들어서면서 선진국은 민간경비산업의 전문화를 위해 자격제도 및 교육훈련을 강화하고 있는 추세이다. 우리나라도 전문성 강화를 위한 교육훈련 시스템의 변화를 시도하고 있으나 합리적이지 못한 선발기준과 교육시스템 운영으로 과점시장이 형성되어 있는 실정이다. 오히려 '직업면허제도'를 통하여 자격증 소지자나 경비업체, 교육기관 및 위탁자의 지대추구행위가 증가하고 있는 상태이다. 경비산업 종사자의 질적 향상을 목적으로 자격증 발급 및 지정교육기관을 통한 기본교육이 실시되고 있으나 실질적인 효과는 적은편이다. 이에 본 연구는 민간경비원 선발 및 교육에 관한 문제점을 찾아본 결과, 이원화된 검정제도와 교육시스템의 구조적 문제 그리고 경비업체 운영자 및 최고관리자(임원)의 전문성과 운영능력에 대한 검증이 전혀 이루어지지 않고 있는 것을 알 수 있었다. 이러한 문제를 해결하기 위해서는 이원화 되어있는 경비지도사 자격증 제도와 경비원 교육 이수 제도를 '공인자격검증제도'로 단일화하며, 그 자격검정 대상은 관련 종사자 전체로 확대하여야 할 것이다. 또한 시장 지배적 지위를 이용한 과점현상으로 발생되는 후생손실을 최소화하고 자율경쟁이 가능하도록 지정교육기관의 수를 늘리고 경비원들의 교육 및 취업(업체) 선택에 자율권을 부여하여야 할 것이다. 앞서 제시한 문제점들을 최소화 하고 객관성을 유지하기 위해서는 전문가 집단부터 이해관계자, 시민단체 까지 모두 참여하는 거버넌스 네트워크 형태의 '민간보안산업위원회'와 같은 새로운 관리 감독 기관 설립이 필요하다.

  • PDF

선형 SOC 사업과 지적재조사측량의 연계에 따른 효과 분석 (Effectiveness Analysis According to the Affiliation of Linear SOC Projects and Cadastral Resurvey Project)

  • 이병길;윤종성;손종영
    • 한국측량학회지
    • /
    • 제32권spc4_2호
    • /
    • pp.393-400
    • /
    • 2014
  • "지적재조사 기본계획"에는 2012년에 수행된 정부의 예비타당성조사 결과가 반영되어 2030년까지 약 1조 3,000억 원의 국가재정을 지적재조사사업에 투입할 것을 계획하고 있다. 지적재조사사업의 사업비 중 78.8%를 차지하고 있는 지적재조사측량을 효율적으로 사업추진하는 것이 전체 지적재조사사업의 효율화에 매우 중요하다. 현재 "지적재조사 기본계획" 상 지적확정측량으로 계획된 13%의 물량은 "측량 수로조사 및 지적에 관한 법률" 제86조에 규정된 면형 SOC(Social Overhead Capital) 사업이며, 여기에 포함되지 않은 선형 SOC 사업도 지적재조사사업과 연계를 통하여 효율성 향상을 기대할 수 있다. 선형 SOC 사업에서 용지경계측량이 이루어지면 설치된 경계말뚝을 이용하여 지역측지계에 의한 분할측량이 이루어지고, 사업이 완료된 후에 용지경계와 내부에 대한 지적재조사측량이 이루어진다. 본 연구에서 제시된 연계방안에 의하면 분할측량과 동시에 용지경계측량 성과를 이용하여 세계측지계에 의한 지적재조사측량 성과를 산출함으로써 중복작업을 배제할 수 있다. 본 연구를 통해 선형 SOC 사업과 지적재조사사업의 연계 방안을 제시하였으며, 이를 통해 년간 73,877필지, 4,078백만원의 효과가 발생할 것으로 예상되었다.

생태계보전협력금 제도 활성화를 위한 부과금 개선 방안 연구 (A study on Improvement and Invigoration of Cooperation Charge on Conservation Ecosystem Fund)

  • 김경호;이상혁
    • 한국환경복원기술학회지
    • /
    • 제14권6호
    • /
    • pp.97-109
    • /
    • 2011
  • Korea introduced the cooperation charge on conservation of ecosystem for minimizing damage of ecosystem due to development projects and their effects and for preparing resources for natural environment conservation projects. Advanced countries have made efforts by expanding investment in natural environment conservation and restoring projects to promote prevention of global warming and improvement of biological diversity, are establishing nationwide strategies and plans. To examine the reality of projects by returns of the cooperation charge on conservation of ecosystem, microsite projects in schools and public facilities take the largest share while their project budgets are only about 100~300 KRW, relatively small, which might be attributable to budget restrictions in accordance with the calculating method of levying cooperation charge on conservation of ecosystem and problems of project proceeding in the system of returning fund for projects in general. The conclusion which this study suggests on invigoration of cooperation charge on conservation of ecosystem and its operation are as followings. First, although the cooperation charge on conservation of ecosystem has been introduced in 2001, the amount of imposition per unit area remains unchanged. It is desirable to increase the amount into $1,400KRW/m^2$ as of August, 2011 as the price index has been continuously rising for the past 10 years and the upward adjustment of imposition per unit area should be notified by the decree of the Ministry of Environment every January. Second, the ceiling amount of the cooperation charge on conservation of ecosystem should be abolished. Now the ceiling amount is defined as 1 billion KRW but it was found that there was not any ceiling amount specified according to the comparative analysis of similar systems with the Korean environmental improvement fund. The ceiling should be abolished so that medium level businesses are carried out and ecosystem recovering projects in the true sense of the word can be made smoothly. Third, weight should be introduced in calculating amounts in accordance with ecologic and economic values. Harmony between development and environment can be achieved by applying differentiated weights of constant regional coefficient by use zone and ecologic and economic values. Continuous efforts of improving cooperation charge on conservation of ecosystem should be made more than anything else so that projects by returns of cooperation charge on conservation of ecosystem get effectiveness.

우리나라 대학도서관 업무의 전산화 및 그 실현에 관한 연구 (A STUDY ON PLANNING AND IMPLEMENTATION OF COMPUTERIZATION OF LIBRARY WORK FOR UNIVERSITY LIBRARIES IN KOREA)

  • 홍순영
    • 한국문헌정보학회지
    • /
    • 제12권
    • /
    • pp.165-200
    • /
    • 1985
  • We have come to the time when we no longer ask why we computerize, but we need to concentrate on how to effectively accomplish the task. Application of computers has been very active in many fields in Korea during the last few years. And yet libraries are rather slow in taking adventage of computers most likely due to the lack of adequate funds and proper understanding of administrators, but also it seems that the majority of librarians are not quite prepared to adopt it. The purpose of this paper is to study the various aspects of computerization of library work, mainly for library administrators and librarians; although they need not understand the electronical and technical aspects of computers, but they should prepare themselves enough at least to be able to make proper requests to computer specialists in relation to what they want to accomplish with computers in order to improve the work of the library. In preparing this paper, not only successful cases of computer application which had been carried out in many libraries of advanced countries have been studied, but also various reasons for failure have been reviewed in order not to make the same mistakes. The paper covers those areas of library work where computers can be applied, such as feasibility, cost effectiveness, planning, implementation and some other aspects of computerization. As a conclusion, two viewpoints need to be discussed. First, each library should work cooperatively with other libraies instead of trying to develop its own computer programs, since we cannot affort to waste financial and technical resources as well as time. Computer applicable library work can be divided and assumed by certain libraries with responsibility to develop turn-key systems applicable to Korean university libraries. In order to carry out this task, there should be complete financial assistance from government, and in turn those libraries shouldf be required to offer assistance to any other interested libaries in Korea. Secondly, library school curriculum should offer such courses where future librarians can learn decision making, business administration and independent thinking in addition to traditional courses. Future librarians as well as those who are already in the profession should prepare themselves to meet the challenge of the professional requirements in order to meet the ever increasing and diverse needs for good quality service generated from the library users.

  • PDF

Evaluation of removal forces of implant-supported zirconia copings depending on abutment geometry, luting agent and cleaning method during re-cementation

  • Rodiger, Matthias;Rinke, Sven;Ehret-Kleinau, Fenja;Pohlmeyer, Franziska;Lange, Katharina;Burgers, Ralf;Gersdorff, Nikolaus
    • The Journal of Advanced Prosthodontics
    • /
    • 제6권3호
    • /
    • pp.233-240
    • /
    • 2014
  • PURPOSE. To evaluate the effects of different abutment geometries in combination with varying luting agents and the effectiveness of different cleaning methods (prior to re-cementation) regarding the retentiveness of zirconia copings on implants. MATERIALS AND METHODS. Implants were embedded in resin blocks. Three groups of titanium abutments (pre-fabricated, height: 7.5 mm, taper: $5.7^{\circ}$; customized-long, height: 6.79 mm, taper: $4.8^{\circ}$; customized-short, height: 4.31 mm, taper: $4.8^{\circ}$) were used for luting of CAD/CAM-fabricated zirconia copings with a semi-permanent (Telio CS) and a provisional cement (TempBond NE). Retention forces were evaluated using a universal testing machine. Furthermore, the influence of cleaning methods (manually, manually in combination with ultrasonic bath or sandblasting) prior to re-cementation with a provisional cement (TempBond NE) was investigated with the pre-fabricated titanium abutments (height: 7.5 mm, taper: $5.7^{\circ}$) and SEM-analysis of inner surfaces of the copings was performed. Significant differences were determined via two-way ANOVA. RESULTS. Significant interactions between abutment geometry and luting agent were observed. TempBond NE showed the highest level of retentiveness on customized-long abutments, but was negatively affected by other abutment geometries. In contrast, luting with Telio CS demonstrated consistent results irrespective of the varying abutment geometries. Manual cleaning in combination with an ultrasonic bath was the only cleaning method tested prior to re-cementation that revealed retentiveness levels not inferior to primary cementation. CONCLUSION. No superiority for one of the two cements could be demonstrated because their influences on retentive strength are also depending on abutment geometry. Only manual cleaning in combination with an ultrasonic bath offers retentiveness levels after re-cementation comparable to those of primary luting.

한-헝가리 간의 신물류 확대전략 (The Expansion Strategy for the New Route between Korea and Hungary)

  • 서대성
    • 유통과학연구
    • /
    • 제12권6호
    • /
    • pp.59-65
    • /
    • 2014
  • Purpose - The competitiveness of logistics in the 21st century rests on ensuring the efficiency and effectiveness of its local hub. While considering entry into a niche market in local logistics, it is pertinent to note that Budapest is emerging as a hub in EU enlargement in Eastern Europe. Big, small, and medium-sized businesses in Korea entered Hungary in the early 1990s since then, there has been a significant increase in Korean presence, of approximately 130 times. This study aimed to identify the key distribution issues that have emerged in relation to Eastern Europe. Research design, data, and methodology - This study indicates that 33 major Korean companies were located in Hungary, which serves as an out post to enter the European marketplace. However, Korea's exports to Hungary have declined (-32.0% in 2012) because of a loss of competitiveness against multinational corporations, due to factors such as the rise in current local distribution costs and wages. Hungary, on the other hand, through diversification and expansion of foreign trade with the non-EU markets, including Korea, is increasing its exports. Strategies of emerging countries are compared and reviewed in this study, by examining the vicissitudes of Hungary's distribution methods. Results - There are issues regarding Hungary's innovative ability. Hungary has a history of low wages and high skilled labor. However, the outflow of high-quality human resources for high-wages has become more extensive, and this underlines concerns that the CEE's trade hub is moving to neighboring countries. After the European financial crisis in 2010, the Hungarian economy is now developing, because of the IMF's measures, and it is being transformed into a trade surplus nation, while regaining distribution volumes rapidly. However, if there is continued lack of investment, the supply chain is weakened and exports decline amidst competition with TNCs or with China's distribution networks. Conclusions - It is necessary to create a new logistics approach for increasing trade between Korea and Hungary. First, Korean small and medium enterprises (SMEs) should build trust by working with advanced Hungarian talent, and they should expand into state-of-the-art fields instead of being confined to traditional sectors. Second, this study focuses on limiting and lowering their high expectations for success according to foreign direct investment (FDI) inflows and the role in the CEE distribution hub Korea should try to strengthen the distribution hub with its centralized population, using better, more highly educated human resources, thereby sustaining more innovative ability. Further, the positive effects of these measures are manifested in enhanced business on both sides of Hungary, namely, the EU and non-EU nations such as Turkey and emerging markets around Europe, and a better engagement in the core placement of culture and industry. For this, Korea can contribute to, and benefit from, a Hungarian logistics center, for adopting the high-tech cluster systems and commercializing distribution technology such as RFID·USN.

전남지역 사회적기업종사자의 만족도인식 연구 (A Study on the Satisfaction Recognition of the Employees of the Social Enterprise in JeollaNamdo)

  • 정문경
    • 디지털융복합연구
    • /
    • 제14권12호
    • /
    • pp.133-140
    • /
    • 2016
  • 본 연구는 전남지역의 사회적 기업이 지속적인 발전을 할 수 있도록 활성화방안을 모색하는데 목적이 있다. 연구 조사는 전남 일원에 거주하는 사회적기업종사자를 조사대상자로 선정 하였다. 조사대상자는 총 210부 중 180부 회수하였고 사전교육과정을 통해 직접 방문하여 응답결과를 기록하는 방법을 원칙으로 자기기입방법을 실시하였다. 수집된 자료 분석은 T-검정과 구조분석을 사용하였다. 연구결과는 사회적 기업의 제도효과성이 종사자만족도인식에 영향을 미치는 것으로 나타났다. 즉, 사회적 기업의 인증제도, 지자체의 우선구매제도가 효과적이라고 볼 수 있다. 둘째, 사회적 기업의 지속가능성이 종사자만족도인식에 영향을 미치는 젓으로 나타났다. 즉, 사회적 기업이 성장하기 위해 새로운 사업아이템 발굴의 필요성이 긍정적인 영향을 미치는 것으로 보인다. 셋째, 사회적기업의 운영애로사항이 종사자만족도인식에 영향을 미치지 않는 것으로 나타났다. 즉, 사회적 기업에 대한 지방정부로부터 공식적인 인정을 못 받음으로서 발생하는 애로사항은 종사자만족도인식에 영향을 미치지 않았다.

LED 조명기구의 함정 적용과 효과분석 (Application and effect analysis of LED luminaires for naval vessels)

  • 조규룡;길경석
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제40권9호
    • /
    • pp.812-817
    • /
    • 2016
  • 본 논문은 함정용 LED 조명기구의 전기적, 광학적 요구사항을 제시하고 실증으로 요구사항 만족여부를 확인하였으며, 2012년 함정에 최초 적용된 이후 현재까지 비용 효과를 분석하였다. 함정용 LED 조명기구의 요구사항을 도출하기 위하여 한국산업규격(KS), 국방규격(KDS) 및 미 해군규격(MIL)의 요구사항을 비교하여 함정용 LED 조명기구의 요구사항을 제시하였다. 형광등기구와 LED 조명기구의 전기적 특성과 광학적 특성을 실험으로 분석하여 요구사항 적용 타당성을 검증하였고, 제시된 함정용 LED 조명기구의 요구사항으로 A1함정에 주 조명등으로 설치되었다. LED 조명기구로 설치된 이후 형광등에 비해 소비전력은 약 40% 감소되었고, 광속은 10 ~ 15% 증가하였다. 또한, 2012년에서 2015년까지 함정 10척에서 약 4,900개의 형광등기구가 감소되는 효과가 있었고, 약 5.6억원의 절감효과를 확인하였다. 향후 지속적으로 함정에 LED 조명기구를 설치하고 있어 많은 절감효과가 기대된다.

호흡 운동에 의한 내부 장기의 움직임 감소에 관한 연구 (A Study on the Reduction of Organ Motion from Respiration)

  • 김재균;이동한;이동훈;김미숙;조철구;류성렬;양광모;오원용;지영훈
    • 한국의학물리학회지:의학물리
    • /
    • 제15권4호
    • /
    • pp.179-185
    • /
    • 2004
  • 선형 가속기를 통한 세기 변조절 방사선치료(Intensity Modulated Radiation Therapy, IMRT), IGRT, 3D-CRT (Three-Dimensional Conformal Radiotherapy) 및 사이버나이프를 통한 치료와 같은 3차원 방사선 치료에서 호흡에 의해 발생하는 종양의 움직임은 실제 치료에 있어 매우 중요한 요소이다. 이와 관련하여 움직이는 종양에 보다 정확한 방사선량을 조사시키기 위하여 ABC (Active Breathing Control), 호흡동기 방사선 치료 등의 여러 방법들이 사용되고 있다. 본 연구에서는 방사선 치료시 호흡에 따른 내부 장기의 움직임 감소 장치를 개발하여 내부 장기 중 횡격막 운동이 얼마나 효율적으로 감소하였는지에 대한 연구를 시행하였다. 4개의 벨트로 구성된 움직임 감소 장치를 환자에게 장착시키고, 환자의 복부 위에 작은 진공쿠션(Vaccum cusion)을 놓아 최대한 호흡을 내쉬게 한 후, 벨트로 환자의 횡격막 주위를 묶는 방법을 사용하였다 이때 횡격막에 움직임 감소 장치를 사용한 경우와 사용하지 않는 경우로 나누어 투시영상(fluoroscopy)에 나타난 횡격막의 움직임을 디지털 카메라 동영상 모드로 촬영하였다. 이 파일을 퍼스널 컴퓨터에 연결 후 포토샵 6.0 소프트웨어 프로그램을 통하여, 횡격막의 가장 높은 지점이 움직이는 최대점과 최소점을 관찰하여 횡격막 운동의 범위를 측정하였다. 움직임 감소장치를 사용하지 않은 경우 횡격막 움직임의 범위는 최소 1.14 cm에서 최대 3.14 cm였고, 그 평균값은 2.14 cm였다. 그러나 횡격막에 움직임 감소 장치를 사용한 결과 그 범위는 0.72~l.95 cm로, 평균값은 1.16 cm로 감소하였다. 횡격막 운동은 20~68.4% (평균 44.9%) 감소효과가 있었다. 횡격막 운동의 주기의 경우에는, 움직임 감소 장치를 사용한 결과 호흡 주기의 평균값이 4.4초에서 3.07초로 줄어들어 호흡이 빨라졌음을 확인할 수 있었다. 본 연구를 통하여 움직임 감소 장치를 사용함으로써 내부 장기 중 횡격막 움직임의 범위가 감소함과 동시에 CTV-PTV 마진이 크게 줄어드는 결과를 확인하였다. 이 결과를 통하여 흉부 또는 복부에 종양을 가진 환자 치료 시 더욱 질 높은 방사선 치료가 실현될 것으로 기대한다.

  • PDF

지역중소기업 수출경쟁력 강화를 위한 산.학.관 협력모델에 관한 사례 연구 - 경북PRIDE상품 육성사업을 중심으로 - (A Case Study on the Industry-Academy-Government Cooperation to Intensify Export Competitiveness of Local SMEs - Focused on Gyeongbuk PRIDE Products -)

  • 여택동;이희용
    • 통상정보연구
    • /
    • 제14권2호
    • /
    • pp.411-443
    • /
    • 2012
  • 정보통신기술의 급속한 발전, 자유무역협정(Free Trade Agreement)의 심화 확산, 글로벌 아웃소싱의 확대 등으로 요약할 수 있는 중소기업의 경영환경 변화는 산학 협력 또는 산학관 협력의 여러 가지 측면에서 많은 변화를 가져오고 있다. 이러한 새로운 산학관 협력은 기존 연구개발 및 이론 연구중심의 협력에서 벗어나 지역기업 제품의 실용화 및 상품화를 목표로 실무 능력과 전문성이 강화된 현장 및 실습 중심의 협력 모델로 추진되고 있다. 기존의 산학관 모델과 비교하여 첫째, 기존의 중소기업 지원 시스템은 중앙정부 및 중소기업관련 유관기관 중심의 하향식 중소기업 지원 체제이나 새로운 모델에서는 선택과 집중을 통한 선도 기업군에 대한 실질적인 맞춤형 지원을 통한 성과 확산을 기대할 수 있다. 둘째, 기존의 산업기술 개발, 인력 교육, 교류 위주의 산학관 협력 모델에서 벗어나 글로벌비즈니스 역량 강화와 해외시장 개척활동 지원이라는 다소 새롭고 실질적인 역할 분담 및 성과 측정이 가능한 모델 구축이 가능하다. 본 연구에서는 새로운 산학관 협력 모델인 '경북PRIDE상품 육성사업' 추진 내용을 고찰하고 '경북 PRIDE상품 육성사업' 지원 기업을 대상으로 '경북PRIDE상품 육성사업' 효과성을 연구방법론을 통해 측정하고자 한다. 경북PRIDE상품은 수요자 중심의 체계적 전담 지원, 전문화된 지식공유와 연계기능, 차별화된 산학관 협력 사업 추진으로 나타낼 수 있다.

  • PDF