• 제목/요약/키워드: Advanced Construction Technology

검색결과 906건 처리시간 0.029초

건설분쟁 중재제도의 차별화 및 개선방안에 관한 연구 (A Study on Differentiation and Improvement in Arbitration Systems in Construction Disputes)

  • 이선재
    • 한국중재학회지:중재연구
    • /
    • 제29권2호
    • /
    • pp.239-282
    • /
    • 2019
  • The importance of ADR(Alternative Dispute Resolution), which has the advantage of expertise, speed and neutrality due to the increase of arbitration cases due to domestic and foreign construction disputes, has emerged. Therefore, in order for the nation's arbitration system and the arbitration Organization to jump into the ranks of advanced international mediators, it is necessary to research the characteristics and advantages of these arbitration Organization through a study of prior domestic and foreign research and operation of international arbitration Organization. As a problem, First, education for the efficient promotion of arbitrators (compulsory education, maintenance education, specialized education, seminars, etc.). second, The effectiveness of arbitration in resolving construction disputes (hearing methods, composition of the tribunal, and speed). third, The issue of flexibility and diversity of arbitration solutions (the real problem of methodologies such as mediation and arbitration) needs to be drawn on the Arbitration laws and practical problems, such as laws, rules and guidelines. Therefore, Identify the problems presented in the preceding literature and diagnosis of the defects and problems of the KCAB by drawing features and benefits from the arbitration system operated by the international arbitration Institution. As an improvement, the results of an empirical analysis are derived for "arbitrator" simultaneously through a recognition survey. As a method of improvement, First, as an optimal combination of arbitration hearing and judgment in the settlement of construction disputes,(to improve speed). (1) A plan to improve the composition of the audit department according to the complexity, specificity, and magnification of the arbitration cases - (1)Methods to cope with the increased role of the non-lawyer(Specialist, technical expert). (2)Securing technical mediators for each specialized expert according to the large and special corporation arbitration cases. (2) Improving the method of writing by area of the arbitration guidelines, second, Introduction of the intensive hearing system for psychological efficiency and the institutional improvement plan (1) Problems of optimizing the arbitration decision hearing procedure and resolution of arbitration, and (2) Problems of the management of technical arbitrators of arbitration tribunals. (1)A plan to expand hearing work of technical arbitrator(Review on the introduction of the Assistant System as a member of the arbitration tribunals). (2)Improved use of alternative appraisers by tribunals(cost analysis and utilization of the specialized institution for calculating construction costs), Direct management of technical arbitrators : A Study on the Improvement of the Assessment Reliability of the Appraisal and the Appraisal Period. third, Improvement of expert committee system and new method, (1) Creating a non-executive technical committee : Special technology affairs, etc.(Major, supports pre-qualification of special events and coordinating work between parties). (2) Expanding the standing committee.(Added expert technicians : important, special, large affairs / pre-consultations, pre-coordination and mediation-arbitration). This has been shown to be an improvement. In addition, institutional differentiation to enhance the flexibility and diversity of arbitration. In addition, as an institutional differentiation to enhance the flexibility and diversity of arbitration, First, The options for "Med-Arb", "Arb-Med" and "Arb-Med-Arb" are selected. second, By revising the Agreement Act [Article 28, 2 (Agreement on Dispute Resolution)], which is to be amended by the National Parties, the revision of the arbitration settlement clause under the Act, to expand the method to resolve arbitration. third, 2017.6.28. Measures to strengthen the status role and activities of expert technical arbitrators under enforcement, such as the Act on Promotion of Interestments Industry and the Information of Enforcement Decree. Fourth, a measure to increase the role of expert technical Arbitrators by enacting laws on the promotion of the arbitration industry is needed. Especially, the establishment of the Act on Promotion of Intermediation Industry should be established as an international arbitration agency for the arbitration system. Therefore, it proposes a study of improvement and differentiation measures in the details and a policy, legal and institutional improvement and legislation.

고온공기주입 공법 적용시 지중온도가 생분해속도에 미치는 영향 (Effects of Soil Temperature on Biodegradation Rate of Diesel Compounds from a Field Pilot Test Using Hot Air Injection Process)

  • 박기호;신항식;박민호;홍승모;고석오
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권4호
    • /
    • pp.45-53
    • /
    • 2005
  • 본 연구의 목적은 실제 디젤유로 오염된 불포화 토양을 복원하기 위해 수행되었던 고온공기 주입 파일롯 테스트에서 토양온도 변화가 생분해 속도에 미치는 영향을 알아보고자 히는 것이었고, 이것을 토대로 현장 생분해 속도, 최적의 생분해 온도 및 1차 분해 속도 상수를 도출하고 총복원기간을 예측해 보았다. 실험은 과거 디젤유 누출 사고가 있었던 고농도 오염지역에 대해 토양의 온도별 현장 호흡률(in-situ respiration)을 약 10일 간격으로 측정하는 식으로 진행되었다. 적용된 복원공법은 고온공기를 주입/추출하여 1차적으로 오염된 디젤 성분을 휘발, 추출하고 이어서 토양의 잔열과 미생물 생분해를 이용하여 토양내 잔류 디젤을 제거하는 후속공정으로 이루어졌다. 토양온도 $26\sim60^{\circ}C$ 범위에서 산소소비속도는 $2.2\sim46.3%/day$ 값을 보였고 $32^{\circ}C$에서 가장 빠른 46.3%/day를 나타냈다. 산소소비속도를 기준으로 하여 계산한 0차반응 생분해 속도(biodegradation rate)는 $6.5\sim21.3mg/kg-day$ 이었고 역시 토양온도 $ 32^{\circ}C$ 에서 최대값을 보였고 그 이전과 이후는 각각 감소된 값을 나타냈다. 주기적으로 측정된 현장호흡률을 바탕으로 계산한 1차 분해속도 k는 몇가지 온도 범위에서 즉, $0.0027\;d^{-1}(@32.8^{\circ}C),\;0.0013\;d^{-1}(@41.1^{\circ}C)$ 그리고 $0.0006\;d^{-1}(@52.7^{\circ}C)$ 이었다. 토양의 초기 TPH 농도 대비목표 농도를 870 mg/kg으로 가정했을 경우 소요 복원기간은 $2\mu9$년 정도 소요되는 것으로 예측되었다.

경제적 철골제작$\cdot$설치 및 공기단축 사례분석연구 (Case Study on Economical Fabrication and Erection of Steel Structure and Reduction in Field Erection Time)

  • 안재봉;최윤기
    • 한국건설관리학회논문집
    • /
    • 제5권5호
    • /
    • pp.183-192
    • /
    • 2004
  • 현재 국내에도 건물의 특성에 알맞은 가변적이며 대공간 확보가 가능하고 사용부재의 두께가 수mm에서 100mm에 이르는 극후판 두께의 건축 철골구조의 건축물 및 Box형 강재교량으로 구축되는 사례가 증가하면서 철골부재의 제작 및 가공기술이 예전보다 더욱 향상되고 구조물로서의 품질관리에 대한 신뢰성의 요구도 증가되고 있는 실정이다, 그러나 국내의 철골조 건축부재의 구조설계는 설계사대로 각기 이루어지고 해당 부재는 공장별로 제작진행되어 그 기술수준에는 보이지 않는 상당한 격차가 있다고 보여지며 업체별로 경제성 등을 고려하여 기본적이며 일반적 철골제작기법을 간결하게 적용하는 것에 머물러 고도한 선진적인 기술의 채용은 대부분 주저할 수 밖에 없는 상황이다 또한, 중소규모의 빌딩 건축물들의 철골조 설계적용을 고려해볼 때 수많은 접합부의 표준화를 비롯하여 구조체 전체의 표준화 및 내$\cdot$외장재까지 포함된 시스템건축의 건축물설계와 부재의 제작 및 설치기술 개발경향도 엿보이고 있는 가운데 특히, 철골부재의 공장제작과 현장설치의 보다 경제적이고 짧은 공기내에 완전한 품질을 확보할 수 있는 부재간의 접합부 설계에 대한 연구검토는 철골분야에 종사하는 업계는 물론 현장 관계자에게도 의미있는 일일 것이다. 본 논문에서는 철골조 건축물의 특성을 알아보고 철골구조물 공장제작 및 현장설치공기를 최대한 단축할 수 있는 철골기둥과 기둥, 기둥과 큰보부재 접합부 변경사례 및 Box Column의 용접자동화, 로봇화에 의한 철골기둥 부재제작사례와 금후 철골구조물 제작상의 문제점과 대응방안에 대하여 서술하고자 한다.

알루미나 제조 공정 산출물 레드머드의 재활용 현황과 기술개발 동향 분석 (Overview and Future Concerns for Red Mud Recycling Technology and Industry)

  • 홍현선;김예린;조현정;김대원;김대웅;김형준;김용;김성표
    • 자원리싸이클링
    • /
    • 제26권5호
    • /
    • pp.12-21
    • /
    • 2017
  • 알루미나 제조공정 부산물인 레드머드는 여러 가지 유용한 자원을 포함하고 있음에도 불구하고 아직까지 재활용되지 않고 있어 환경문제를 야기하고 있다. 현재 우리나라에서 레드머드가 매년 약 20만 톤 이상을 생산하고 있으며 대부분이 야적되고 있는 실정이다. 글로벌하게 보면 최근 중국의 알루미나 생산량이 증가함에 따라 전 세계에서 발생하는 레드머드의 양은 1억 톤 이상으로 꾸준히 증가하고 있다. 레드머드의 재활용 기술은 우리나라를 비롯한 많은 국가에서도 개발되고 있지만, 재활용 및 처리 기술은 여전히 레드머드의 생산증가 속도에 비해 미흡한 실정이다. 본 논문에서는 레드머드와 관련된 특허, 논문, 기술보고서를 내용별 연도별로 분석하였다. 또한 국내 산출 레드머드의 물성 분석을 통해 기초 소재특성 자료를 제공하였고 국내외 레드머드 재활용의 실용화 추진 사례를 분석하여 실용화 기술 개발 가능성을 제시하였다. 특히 레드머드에서 희토류를 회수하는 기술, 환경오염 방지제 기술 등은 수요가 높고 경제적 가치가 높기 때문에 전 세계적으로 개발되고 있는 것으로 파악되었다. 이처럼 본 연구에서 도출된 레드머드의 기술개발 사례 등의 자료는 향후 고부가가치의 실용적 연구 및 기술 개발에 기여할 것으로 판단된다.

하천시설 유지운영을 위한 손상정보 관리방안 연구 (Study on Damage Information Management Plan for Maintenance and Operation of River Facilities)

  • 주재하;남정용;김태형
    • 한국전산구조공학회논문집
    • /
    • 제34권1호
    • /
    • pp.9-18
    • /
    • 2021
  • 최근 건설시장에 4차 산업혁명기술의 급속한 확산과 도입, 적용이 트랜드로 부각되고 있다. BIM 기술은 4차 산업혁명 기술의 근간을 이루는 다차원 정보체계이다. 이러한 정보기반체계를 활용한 하천분야도 유지관리를 위한 현행화 방안 등 적극적인 연구검토가 되고 있다. 최근 하천 전문가들의 하천분야 BIM도입 효과에 필요성을 반영하여 적극적인 연구와 현행화 작업을 해야 된다. 그리고 첨단기술을 반영한 시설물 유지관리 정보체계를 활성화하고 관리계획 수립 및 운영을 위해서는 다양한 정보체계를 구축하기 위한 도구 및 지원소프트웨어의 개발이 반드시 필요할 것으로 전망된다. 하천시설의 유지운영을 위한 연구로 기본적으로 기존 도면자료를 이용하여 3차원 정보모델을 구축하고 이를 활용한 손상을 점검하고 정보화하며 보수보강을 위한 자료로 활용토록 하는 것이다. 이는 기존 도면방식에 없는 정보체계를 하천시설물을 3D 모델링과 함께 유지관리정보를 속성으로 구축하는 방법을 연구하여 유지운영을 위한 점검, 손상 관리를 보다 효과적이고 활용성이 높은 관리방안을 제시하고자 하였다.

핀란드 고준위방사성폐기물 심층처분시설 처분터널 뒤채움 설계 변경을 위한 연구사례 분석 (Analysis on Design Change for Backfilling Solution of the Disposal Tunnel in the Deep Geological Repository for High-Level Radioactive Waste in Finland)

  • 구희권;김석훈;이정환
    • 터널과지하공간
    • /
    • 제33권6호
    • /
    • pp.435-444
    • /
    • 2023
  • 핀란드에서는 고준위방사성폐기물 심층처분시스템 공학적방벽의 구성요소인 뒤채움재에 대해 기존 건설허가 신청 시 적용한 블록/펠렛 방식을 과립형 방식으로 변경하여 운영허가를 신청한 바 있다. 이에 따라 뒤채움에 대한 설계개념 수립을 위해 기존 뒤채움 방식의 문제점 및 대안 설계의 개선점을 확인하여 국내 적용성을 검토할 필요가 있다. 이에 본 논문에서는 우선적으로 핀란드 심층처분시설 인허가 과정에서 처분터널 뒤채움 방식 변경과 관련하여 수행된 주요 연구사례를 검토하여 블록/펠렛 뒤채움 방식 적용 시 예상되는 문제점을 확인하였다. 또한, 이를 바탕으로 뒤채움 방식에 대해 기술적 및 운영적 측면에서 고려되어야 하는 요소항목을 도출한 후 2가지 방식에 대한 비교·평가를 수행하여 설계 변경의 종합적 우위성을 규명하였다. 이와 같은 결과는 향후 국내 고유 심층처분시설 개발과정에서 최적 설계안을 도출하기 위한 기술적 근거자료로 활용할 수 있을 것으로 예상된다. 단, 뒤채움 방식 선정을 위해 필수적으로 고려되어야 하는 세부 요소항목에 대해 추가 기술자료를 확보하여 적용 가능성을 사전에 검토해야 한다.

M2M 환경에서 장치간 상호 인증 및 정형검증 (Inter-device Mutual authentication and Formal Verification in M2M Environment)

  • 배우식
    • 디지털융복합연구
    • /
    • 제12권9호
    • /
    • pp.219-223
    • /
    • 2014
  • 최근 무선통신 시스템의 기술이 발전함으로 M2M(Machine-to-Machine)이 산업분야에서 관심이 되고 있다. 기기간 통신인 M2M은 재난, 안전, 건설, 보건복지, 기상, 환경, 물류, 문화, 국방, 의료, 농.축산 등 사람의 접근이 어려운 공간 등에 설치되어 운용된다. 이는 사람을 대신해 장비들이 자동으로 상황에 맞추어 통신을 하고 어느 정도의 조치는 자동으로 취해지도록 함으로써 사람을 대신한 정보 관리 및 장비 운영을 할 수 있다. M2M이 디바이스간 통신이 무선으로 이루어지는 경우 공격자의 공격에 노출되어 운영되는 보안적 문제로 정당한 장치인지 상호인증 등 적절한 보안이 필요하다. 관련하여 최근 보안적으로 안전한 많은 프로토콜이 연구 되고 있으며 본 논문에서는 M2M 보안문제를 해결하기 위하여 SessionKey, HashFunction, 및 Nonce 를 적용하였으며 보안취약성을 보완한 안전한 프로토콜을 제안한다. 제안프로토콜을 기존의 대부분의 연구처럼 수학적 정리증명으로 안전함을 주장하지 않고 Casper/FDR을 이용하여 정형검증 하였으며 실험결과 제안프로토콜이 안전함이 확인되었다.

Multiple-inputs Dual-outputs Process Characterization and Optimization of HDP-CVD SiO2 Deposition

  • Hong, Sang-Jeen;Hwang, Jong-Ha;Chun, Sang-Hyun;Han, Seung-Soo
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제11권3호
    • /
    • pp.135-145
    • /
    • 2011
  • Accurate process characterization and optimization are the first step for a successful advanced process control (APC), and they should be followed by continuous monitoring and control in order to run manufacturing processes most efficiently. In this paper, process characterization and recipe optimization methods with multiple outputs are presented in high density plasma-chemical vapor deposition (HDP-CVD) silicon dioxide deposition process. Five controllable process variables of Top $SiH_4$, Bottom $SiH_4$, $O_2$, Top RF Power, and Bottom RF Power, and two responses of interest, such as deposition rate and uniformity, are simultaneously considered employing both statistical response surface methodology (RSM) and neural networks (NNs) based genetic algorithm (GA). Statistically, two phases of experimental design was performed, and the established statistical models were optimized using performance index (PI). Artificial intelligently, NN process model with two outputs were established, and recipe synthesis was performed employing GA. Statistical RSM offers minimum numbers of experiment to build regression models and response surface models, but the analysis of the data need to satisfy underlying assumption and statistical data analysis capability. NN based-GA does not require any underlying assumption for data modeling; however, the selection of the input data for the model establishment is important for accurate model construction. Both statistical and artificial intelligent methods suggest competitive characterization and optimization results in HDP-CVD $SiO_2$ deposition process, and the NN based-GA method showed 26% uniformity improvement with 36% less $SiH_4$ gas usage yielding 20.8 ${\AA}/sec$ deposition rate.

Numerical simulation of hollow steel profiles for lightweight concrete sandwich panels

  • Brunesi, E.;Nascimbene, R.;Deyanova, M.;Pagani, C.;Zambelli, S.
    • Computers and Concrete
    • /
    • 제15권6호
    • /
    • pp.951-972
    • /
    • 2015
  • The focus of the present study is to investigate both local and global behaviour of a precast concrete sandwich panel. The selected prototype consists of two reinforced concrete layers coupled by a system of cold-drawn steel profiles and one intermediate layer of insulating material. High-definition nonlinear finite element (FE) models, based on 3D brick and 2D interface elements, are used to assess the capacity of this technology under shear, tension and compression. Geometrical nonlinearities are accounted via large displacement-large strain formulation, whilst material nonlinearities are included, in the series of simulations, by means of Von Mises yielding criterion for steel elements and a classical total strain crack model for concrete; a bond-slip constitutive law is additionally adopted to reproduce steel profile-concrete layer interaction. First, constitutive models are calibrated on the basis of preliminary pull and pull-out tests for steel and concrete, respectively. Geometrically and materially nonlinear FE simulations are performed, in compliance with experimental tests, to validate the proposed modeling approach and characterize shear, compressive and tensile response of this system, in terms of global capacity curves and local stress/strain distributions. Based on these experimental and numerical data, the structural performance is then quantified under various loading conditions, aimed to reproduce the behaviour of this solution during production, transport, construction and service conditions.

국가 R&D 지식정보관리시스템 구축에 관한 연구 -연구기획 및 관리를 중심으로- (A Study on the Construction of the National R&D Knowledge Information -Mainly Focused on the Research Planning and Management-)

  • 류범종;최기석
    • 한국문헌정보학회지
    • /
    • 제38권1호
    • /
    • pp.281-301
    • /
    • 2004
  • 우리나라의 R&D 투자대비 성과 관리는 선진국에 비해 저조하며 국가연구개발사업을 추진하는데 있어 효율적 기술 기획 및 기술확산의 성과활용 체제가 미흡하여 연구개발 투자 효율성이 낮아지고 있다. 본 연구에서는 국가 연구개발 사업의 효율적인 기획, 관리 체제 구축을 위한 종합정보시스템을 구축하며, 국가 연구개발 활동 주체간의 원활한 정보유통 체제와 효율적이고 효과적인 연구개발 정보 지원체제 구축 방안을 제안한다. 아울러 제안된 시스템을 기초기술연구정보망 구축 사업에 실제 적용하는 사례를 보인다. 이렇게 함으로써 전주기적 연구개발 체제를 종합하는 국가연구개발사업에 대한 종합적 서비스를 제공할 수 있게 된다.