• 제목/요약/키워드: Adsorptive fractionation

검색결과 4건 처리시간 0.018초

INFLUENCE OF HUMIC SUBSTANCE (HS) ADSORPTIVE FRACTIONATION ON PYRENE PARTITIONING TO DISSOLVED AND MINERAL-ASSOCIATED HS

  • Hur, Jin;Schlautman, Mark A.
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 추계학술발표회
    • /
    • pp.123-127
    • /
    • 2003
  • Changes in pyrene partitioning due to mineral surface adsorptive fractionation processes of humic substances (HS) were examined in model environmental systems. For purified Aldrich humic acid(PAHA), carbon-normalized pyrene binding coefficients ( $K_{oc}$ ) for the residual (i.e., nonadsorbed and dissolved) PAHA components were different from the original dissolved PAHA $K_{oc}$ , value prior to contact with mineral suspensions. A positive correlation between the extent of pyrene binding and weight-average molecular weight (M $W_{w}$) of residual PAHA components was observed, which appeared to be unaffected by the specific mineral adsorbents use and fractionation mechanisms. A similar positive correlation was not observed with the adsorbed PAHA components, suggesting that conformational changes occurred for the mineral-associated components upon adsorption. Nonlinear pyrene sorption to mineral-associated PAHA was observed, and the degree of nonlinearity is hypothesized to be dependent on adsorptive fractionation effects and/or structural rearrangement of the adsorbed PAHA components.s.

  • PDF

추출제로 카프르산을 사용한 아연(II)의 흡착 기포 분리 (Adsorptive Bubble Separation of Zinc (II) Using Capric Acid as Collector)

  • Chung Hee Kwak;Chul Lee
    • Nuclear Engineering and Technology
    • /
    • 제15권2호
    • /
    • pp.149-153
    • /
    • 1983
  • 흡착 기포 분리에 의하여 수용액으로부터 아연(II)을 회수하는 방법에 관하여 연구하였다. 그리고 흡착 기포 분리에서 용매부선 과정과 거품 분별 과정에 채용되었고 이들 분리 과정에서 카프르산을 아연의 회수 물질로 사용하였다. 이온 강도 및 수소이온의 농도가 분리 과정의 효율에 어떤 영향을 미치는지를 기술하였으며, 추출제로 벤젠에 녹은 카프르산을 이용한 용매 추출과정과도 상호 비교하였다.

  • PDF

Influence of Solution pH on Pyrene Binding to Sorption-Fractionated and Kaolinite-Bound Humic Substance

  • Hur Jin
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권5호
    • /
    • pp.61-69
    • /
    • 2005
  • 다양한 pH 조건하에서 휴믹물질 흡착적 분획현상에 의해 변화하는 용존 및 kaolinite에 흡착된 휴믹물질(Aldrich 휴믹산)과의 pyrene의 결합변화를 조사하였다. 먼저 흡착효과를 배제한 흡착 전 상태에서 bulk 휴믹산은, pH에 따른 분배(partitioning)과 크기별 배제효과 영향 차이에 의해 유기탄소 결합계수의 변화를 보였다. 모든 용액 pH 조건에 서 Aldrich 휴믹산은 kaolinite에 흡착하는 과정에서 분자량별 분획이 일어났으며 용존 휴믹산의 분자량은 흡착전의 분자량과는 달랐다. 그에 따라 흡착 후 남은 휴믹산과의 pyrene 결합계수는 흡착 전의 경우와 달랐다. pH 7과 9 조건에서 흡착 후 남은 휴믹산은 그 분자량과 pyrene 결합계수 사이에 양성 상관관계를 보였으나 그러한 상관관계가 pH 4의 조건하에서는 관찰되지 않았다. 이러한 차이는 흡착적 분획과정에서 pH 4인 경우 고분자에 대한 독점적 분획현상이 없었고 분자량에 대해 다소 균일한 분획이 일어났다는 점으로 설명할 수 있었다. 또한 관찰되는 분획현상 차이는 pH 조건에 따라 달라지는 흡착포화 정도 차이 때문인 것으로 사료된다. 흡착된 PAHA의 경우, 형태변화 (conformational changes) pyrene 결합에 중요한 것으로 나타났다. pH 7과 9 조건 하에서, 흡착전의 휴믹산의 경우 더 낮은 pyrene 결합계수를 보였고 이러한 형태변화효과는 pH가 높을수록 더 크게 나타났다.

제올라이트: 압력순환형 흡착제로서의 특성과 CO2 흡착성능 (Zeolites: Their Features as Pressure Swing Adsorbents and CO2 Adsorption Capacity)

  • 김문현;조일흠;최상옥;추수태
    • 한국환경과학회지
    • /
    • 제23권5호
    • /
    • pp.943-962
    • /
    • 2014
  • Industrial gas drying, dilute gas mixtures purification, air fractionation, hydrogen production from steam reformers and petroleum refinery off-gases, etc are conducted by using adsorptive separation technology. The pressure swing adsorption (PSA) has certain advantages over the other methods, such as absorption and membrane, that are a low energy requirement and cost-effectiveness. A key component of PSA systems is adsorbents that should be highly selective to a gas being separated from its mixture streams and have isotherms suitable for the operation principle. The six standard types of isotherms have been examined in this review, and among them the best behavior in the adsorption of $CO_2$ as a function of pressure was proposed in aspects of maximizing a working capacity upon excursion between adsorption and desorption cycles. Zeolites and molecular sieves are historically typical adsorbents for such PSA applications in gas and related industries, and their physicochemical features, e.g., framework, channel structure, pore size, Si-to-Al ratio (SAR), and specific surface area, are strongly associated with the extent of $CO_2$ adsorption at given conditions and those points have been extensively described with literature data. A great body of data of $CO_2$ adsorption on the nanoporous zeolitic materials have been collected according to pressure ranges adsorbed, and these isotherms have been discussed to get an insight into a better $CO_2$ adsorbent for PSA processes.