• 한국환경보건학회지
• /
• 제37권2호
• /
• pp.141-149
• /
• 2011

This study aimed for developing a two stage dual media filtration system. It has a sand and activated carbon layer above the under-drain system, and a sand layer above the middle-drain system for pretreatment. When retrofitting an old sand filter bed or designing a new one, this technology can substitute the existing sand filter bed without requiring a new plant site. The removal rate of total particle is 93, and 3~7 ${\mu}m$ and 5~15 ${\mu}m$ particles are all 97%. These high removal efficiencies of each pollutant due to adsorption and biological oxidation in activated carbon filter layer. The best backwashing method of two stage dual media filtration system is ascertained by air injection, air + water injection and water injection sequence. In this study, a pilot plant of two stage and dual filtration system was operated for 4 months in water treatment plant. The stability of turbidity was maintained below 1 NTU. The TOC, THMFP and HAAFP were removed about 90% by two stage and dual media filtration system, which is almost 2 times higher than existing water treatment plant.

• Korean Chemical Engineering Research
• /
• 제46권2호
• /
• pp.286-290
• /
• 2008

고분자전해질 연료전지는 $60{\sim}80^{\circ}C$ 운전 온도에서 개질 가스에 약간의 일산화탄소만 있어도 백금 표면에 CO가 강하게 흡착하여 촉매기능을 방해한다. 본 연구에서는 일산화탄소를 산화시키기 위해 Ru/C 층(CO 필터)을 Pt/C 층과 가스 확산층(GDL) 사이에 위치 시켰다. Ru/C 필터는 PEMFC anode가 좋은 CO 내성을 갖게 했으나 Ru/C 필터 두께로 인한 물질전달 저항과 전하 전달 저항증가에 의한 단위전지 성능저하가 0.6 V에서 약 10% 있었다. 고분자막의 열화는 PEMFC 수명을 단축시키는 주요 원인이 되고 있다. 막 내구성은 전극의 촉매 종류에 영향을 받을 수 있다. 가속실험결과 Ru/C 촉매가 불소유출 속도를 향상시킴을 보임으로써 Ru/C 촉매 첨가가 PEMFC 수명을 단축시킬 수 있음을 보였다.

• Transactions on Electrical and Electronic Materials
• /
• 제8권1호
• /
• pp.5-10
• /
• 2007

Using a reference slurry, ammonium dodecyl sulfate (ADS), an anionic and environmentally friendly surfactant, was investigated as an alternative to BTA for its inhibition and lubrication characteristics. Results demonstrated that the inhibition efficiency of ADS was superior to that of BTA. Coefficient of friction (COF) was the lowest when the slurry contained ADS. This suggested that adsorbed ADS on the surface provided lubricating action thereby reducing the wear between the contacting surfaces. Temperature results were consistent with the COF and removal rate data. ADS showed the lowest temperature rise again confirming the softening effect of the adsorbed surfactant layer and less energy dissipation due to friction. Spectral analysis of shear force showed that increasing the pad-wafer sliding velocity at constant wafer pressure shifted the high frequency spectral peaks to lower frequencies while increasing the variance of the frictional force. Addition of ADS reduced the fluctuating component of the shear force and the extent of the pre-existing stick-slip phenomena caused by the kinematics of the process and collision event between pad asperities with the wafer. By contrast, in the case of BTA, there were no such observed benefits but instead undesirable effects were seen at some polishing conditions. This work underscored the importance of real-time force spectroscopy in elucidating the adsorption, lubrication and inhibition of additives in slurries in CMP.

• 전기화학회지
• /
• 제2권2호
• /
• pp.106-111
• /
• 1999

[ $CaNi_5$ ] 수소저장합금의 전기화학적 충$\cdot$방전 특성에 미치는 MG(mechanical grinding) 영향이 Ar및 $H_2$ 가스분위기에서 조사되었다 MG공정중 $CaNi_5$ 합금은 표면 산화층의 파괴와 재생성 및 산화층 근방의 불균질화로 인하여 MG 15시간 이후부터 CaO와 Ni로 뚜렷한 상분리가 일어났다. $MG-CaNi_5$는 MG시간이 길어질수록 초기의 전기화학적 방전용량은 현저히 감소하였지만 충$\cdot$방전 싸이클의 증가에 따른 용량저하 속도는 $CaNi_5$합금에 비하여 낮았다. MG처리된 $CaNi_5$합금의 퇴화는 MG공정중의 상분리 및 불규칙화에 의한 수소의 가역반응 site의 감소 및 분극저항의 증가, KOH 전해질 내에서 합금 표면의 산화반응에 의한 부동태 피막형성에 기인하는 것으로 판단되었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.444-450
• /
• 2011

A novel method that utilizes poly(5-methyl-2-thiozyl methacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid-co-divinylbenzene) [MTMAAm/AMPS/DVB] as a solid-phase extractant was developed for simultaneous preconcentration of trace Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Ni(II), Pb(II), and Zn(II) prior to the measurement by flame atomic absorpiton spectrometry (FAAS). Experimental conditions for effective adsorption of the metal ions were optimized using column procedures. The optimum pH value for the simultaneously separation of the metal ions on the new adsorbent was 2.5. Effects of concentration and volume of elution solution, sample flow rate, sample volume and interfering ions on the recovery of the analytes were investigated. A high preconcentration factor, 100, and low relative standard deviation values, $\leq$1.5% (n = 10), were obtained. The detection limits (${\mu}gL^{-1}$) based on the 3s criterion were 0.18 for Cd(II), 0.11 for Co(II), 0.07 for Cr(III), 0.12 for Cu(II), 0.18 for Fe(III), 0.67 for Mn(II), 0.13 for Ni(II), 0.06 for Pb(II), and 0.09 for Zn(II). The validation of the procedure was performed by the analysis of two certified reference materials. The presented method was applied to the determination of the analytes in various environmental samples with satisfactory results.

• 한국잡초학회지
• /
• 제10권3호
• /
• pp.207-213
• /
• 1990

Oxyfluorfen(2-chloro-2,2,2-trifluro-p-toyl-3-ethoxy-4-nitrophenyl ether)의 서방형(徐放型) 모형화(模型化)를 위하여 각종(各種) 흡착(吸着) 및 치환형(置換型)2 30종(種)을 만들고 유채를 검정식물(檢定植物)로 하는 in vitro test를 실시(實施)하여 비교적(比較的) 활성(活性)이 높고 지속성(持續性)이 인정(認定)되는 16종제형(種製型)을 선발(選拔)할 수 있었다. 따라서 이들 16종(種)의 제형(製型)을 기존제형(旣存製型) 4종(種)과 병행공시(竝行公試)하여 pot실험(實驗)을 수행(遂行)하였다. 검정식물(檢定植物)로는 물달개비를 사용(使用)하였고, 처리후(處理後) 73일(日)까지 정기적(定期的)으로 제초활성(除草活性)이 변동양상(變動樣相)과 지속성(持續性)을 판단(判斷)한 결과(結果) Polymer 11, Elvan 7/40, Coal slag 7/40, Zeolite (A), Bentonite(A)의 5종(種)을 선발(選拔)할 수 있었다. 이들의 제초활성(除草活性)은 처리후(處理後) 73일(日)까지 무처리대비(無處理對比) 100%에 가까운 Biomass inhibition rate를 보였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.117-121
• /
• 2006

Virgin bleached kraft pulp, CPO (computer printout) and white ledgers are main raw materials used in tissue mills. The utilization rate of recycled fibers and virgin pulp in South Korea tissue industry are 90% and 10%, respectively. To improve brightness of printing grades the use of 'fluorescent whitening agents (FWAs)' or 'optical brightening agents (OBAs)' has been increased. When recycling these papers for tissue production, it is unavoidable that FWAs contained in recycled papers flow into tissue production lines and remain in the products. And this draws great attention from the public. This study was carried out to develop a technology for the removal of fluorescent whitening agents from recycled fibers. Enzymatic removal of FWAs was evaluated as a method to remove FWAs from the recycled fiber. The ${\alpha}-amylase$ that degrades starched used for surface sizing of fine papers and contained substantial condition is needed to prevent the re-adsorption of FWAs on fibers. The temperature of pulp suspension was another important factor affecting on FWA removal. The higher the temperature, the greater the efficiency of removing FWAs was obtained. Optimum pH and temperature for the effective removal of FWAs were suggested to be pH 8.5 and $65^{\circ}C$, respectively. The enzymatic removal of FWAs showed a great synergistic effect when proper control in pH and temperature was made.

• 한국습지학회지
• /
• 제14권4호
• /
• pp.629-635
• /
• 2012

본 연구는 부영양화 호소의 개선을 위하여 분말활성탄 공정을 적용하고 호소수 내의 용존 유기물과 인의 제거특성을 파악하고자 수행되었다. 용존 유기물의 제거특성은 부유물질의 제거특성과 다르며 응집제 주입량과 pH에 영향을 받음을 확인하였다. 용존 유기물은 분말활성탄에 의해 흡착으로 제거되며 응집과정에서 용존 유기물의 제거효율을 증가시킬 수 있었다. 응집침전공정의 인 제거 과정과 같은 화학침전과정에서 형성되는 용존성 착화합물과 콜로이드성 물질은 인의 제거효율을 저하시키는 요인이다. 분말활성탄의 주입으로 콜로이드성 물질과 용존성 착화합물을 흡착함으로써 인의 제거효율을 증가시킬 수 있었다. 또한 분말활성탄은 응집과정의 floc의 밀도를 증가시켜 침전속도를 높이고 고액분리 효율을 높일 수 있었다.

• 한국재료학회지
• /
• 제20권5호
• /
• pp.246-251
• /
• 2010

The composite photocatalysts of a Fe-modified carbon nanotube (CNT)-$TiO_2$ were synthesized by a two-step sol-gel method at high temperature. Its chemical composition and surface properties were investigated by BET surface area, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD) and ultraviolet-visible (UV-Vis) spectroscopy. The results showed that the BET surface area was improved by modification of Fe, which was related to the adsorption capacity for each composite. Interesting thin layer aggregates of nanosized $TiO_2$ were observed from TEM images, probably stabilized by the presence of CNT, and the surface and structural characterization of the samples was carried out. The XRD results showed that the Fe/CNT-$TiO_2$ composites contained a mix of anatase and rutile forms of $TiO_2$ particles when the precursor is $TiOSO_4{\cdot}xH_2O$ (TOS). An excellent photocatalytic activity of Fe/CNT-$TiO_2$ was obtained for the degradation of methylene blue (MB) under visible light irradiation. It was considered that Fe cation could be doped into the matrix of $TiO_2$, which could hinder the recombination rate of the excited electrons/holes. The photocatalytic activity of the composites was also found to depend on the presence of CNT. The synergistic effects among the Fe, CNT and $TiO_2$ components were responsible for improving the visible light photocatalytic activity.

• KSBB Journal
• /
• 제23권2호
• /
• pp.135-141
• /
• 2008

SMB 크로마토그래피를 위한 예비 실험으로서 L-ribose와 L-arabinose의 혼합물의 분리 특성을 $NH_2$ 컬럼을 사용하여 확인하였고 두 성분 분리 최적 조건으로 Acetonitrile과 증류수의 조성이 85/15 (v/v)에서 실험을 수행하였다. PIM(Pulse input method)과 Aspen chromatography 전산모사를 통해 L-ribose와 L-arabinose가 선형 흡착등온식을 따르는 것을 알 수 있었으며 각 성분의 Henry상수를 추산하였고 다음과 같다. $$C_{S,Ribose}=3.51{\cdot}C_{M.Ribose}$$ $$C_{S,Arabinose}=5.07{\cdot}C_{M.Arabinose}$$ 이를 바탕으로 SMB 크로마토그래피의 최적 운전조건을 수립하기 위하여 Triangle 이론에 의한 운전 조작변수를 추산함으로서 $m_2\;=\;3.51$, $m_3\;=\;5.07$일 때 즉, 삼각형에서 꼭지점의 조건에서 L-ribose와 L-arabinose의 순도가 각각 85, 80% 정도로 두 성분의 분리에 있어서 가장 효과적인 운전 조건임을 확인 할 수 있었다.