• 한국환경과학회지
• /
• 제8권4호
• /
• pp.497-502
• /
• 1999

Removal of Pb(Ⅱ), Cu(Ⅱ), Cr(Ⅲ), and Zn(Ⅱ) ions from aqueous solutions using the adsorption process on domestic loess minerals has been investigated. Variations of contact time, pH, adsorption isotherms and selectivity of coexisting ions and leachate were experimental parameters. YDI, YPT and KRT samples diluted in 1% aquous solution which was adjusted pH 10.8, 8.0 and 6.50, respectively. The result of XRD measurement, Quartz was mainly observed in all samples. In the case of KRT sample, Kaolinite, Feldspar, Chlorite consisting of clay minerals shows almost same pattern with YPT samples. Different properties showed from the YDI sample containing Iillite, remarkably. For all the metals, maximum adsorption was observed at 30min∼60min. Adsorption of metal ions on loess minerals were reached an equilibrium by shaking the solution for about 30min. Removal efficiency of Pb(Ⅱ) ion for KRT, YPT and YDI were 84.7%, 92% and 100%, respectively. The Cu(Ⅱ) and Zn(Ⅱ) adsorptivity on KRT showed the low in various pH solution However, those on YPT and YDI were high than 90% except for the pH 2 solution. The orders of adsorptivities for domestic loess minerals showed as following : YPT>KRT>YDI. The adsorption isotherms of Cu(Ⅱ) and Zn(Ⅱ) ions on clay minerals were fitted to a Freundlich's. Freundlich constants(1/n) of KRT and YPT domestic loess minerals were 0.63, 0.97 and 0.36, 0.25, respectively.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2009년도 추계학술발표회 논문집
• /
• pp.79-84
• /
• 2009

Understanding the polymer adsorption in particle/binder/solvent system is important to achieve successful film products. While most of the reported work has dealt with the suspension microstructure, a few studies have focused on film formation. We investigated the effect of adsorption on film formation through measurement of adsorption amount in suspension and stress development in drying film with respect to mixing time ($t_m$). All of the adsorption amount (PVA), characteristic stress ($\sigma_{ch}$) exhibited similarities expressed by the form of $1-e^{t_m/{\tau}}$. The porous and non-unifonn dried film at short tm became close-packed and uniform with longer $t_m$. We found that polymer adsorption plays the key role in film fonnation as it introduces steric repulsion in suspension and suppresses the flocculation during solvent evaporation. We also found that the mixing time for the saturated polymer adsorption is the important variable to acquire the consolidated and uniform film microstructure.

• 청정기술
• /
• 제9권4호
• /
• pp.153-161
• /
• 2003

벤젠과 톨루엔을 활성탄에 흡착하는 공정을 개발하기 위한 기초 실험을 수행하였다. 정적흡착실험은 온도와 압력의 변화에 따른 벤젠과 톨루엔의 흡착특성을 연구하였다. 흡착제로는 활성탄 12~20mesh와 20~40mesh를 사용하였으며 흡착질로는 벤젠, 톨루엔, 질소를 사용하였다. 실험결과는 Langmuir isotherm으로 fittimg하였고, 온도의존성을 계산하였고, 흡착열과 흡착상수를 얻었다. 이성분 정적흡착실험에서는 Langmuir isotherm parameter들이 Extended Langmuir isotherm에 일반적으로 적용할 수 있는 지를 확인하였다. 이때 사용한 실험기법은 기존의 방법에서처럼 흡착 전후의 기상의 몰분율을 측정하여 실험하는 방법이 아닌 압력변화반을 측정하는 정용적법에 기초한 방법을 사용하였다. 동적흡착실험올 수행하여 실험결과를 전사모사로부터 얻어진 결과와 비교하였다. 본 연구에서는 공정에서 흡착조건을 결정할 수 있는 기본 데이터를 획득할 수 있었다.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.106-112
• /
• 2015

Many researchers have proposed analytical methods to measure the adsorption of di-sulpho fluorescent whitening agents (D-FWAs), but practical methods for D-FWA utilization in an actual paper mill have not been established. In particular, the D-FWA adsorption behavior must be monitored in paper mills to ensure the effective use of D-FWAs. This study used the zeta-potential of pulps as an indicator of the adsorption behavior of a D-FWA. We identified the relationship between the actual adsorption of the D-FWA and the zeta-potential of the pulps as a function of D-FWA addition. zeta-potential measurements were then used to analyze the D-FWA adsorption behavior under different conditions of pulp type, conductivity, and pH. The actual adsorption of a D-FWA was proportional to the ${\Delta}zeta-potential$ of the pulps (i.e., the difference between the zeta-potential of a pulp containing no D-FWA and one containing the D-FWA). The ${\Delta}zeta-potential$ of the pulps was therefore adopted for adsorption analysis. A higher adsorption of the D-FWA was observed onto Hw-BKP than onto Sw-BKP because of the shorter fiber length and higher fines content of Hw-BKP. A high conductivity and an acidic pH decreased the D-FWA adsorption because of direct effects of high ion concentrations and low pH on the D-FWA solubility. Therefore, a D-FWA must be added to Hw-BKP under low conductivity conditions and at neutral or alkaline pH to optimize the D-FWA adsorption.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.378.2-378.2
• /
• 2016

Biosensors currently suffer from severe non-specific adsorption of proteins, which causes false positive errors in detection through overestimation of the affinity value. Overcoming this technical issue motivates our research. Polyethylene glycol (PEG) is well known for its ability to reduce the adsorption of biomolecules; hence, it is widely used in various areas of medicine and other biological fields. Likewise, amine functionalized surfaces are widely used for biochemical analysis, drug delivery, medical diagnostics and high throughput screening such as biochips. As a result, many coating techniques have been introduced, one of which is plasma polymerization - a powerful coating method due to its uniformity, homogeneity, mechanical and chemical stability, and excellent adhesion to any substrate. In our previous works, we successfully fabricated plasmapolymerized PEG (PP-PEG) films [1] and amine functionalized films [2] using the plasma enhanced chemical vapor deposition (PECVD) technique. In this research, an amine functionalized PP-PEG film was fabricated by using the plasma co-polymerization technique with PEG 200 and ethylenediamine (EDA) as co-precursors. A biocompatible amine functionalized film was surface characterized by X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). The density of the surface amine functional groups was carried out by quantitative analysis using UV-visible spectroscopy. We found through surface plasmon resonance (SPR) analysis that non-specific protein adsorption was drastically reduced on amine functionalized PP-PEG films. Our functionalized PP-PEG films show considerable potential for biotechnological applications such as biosensors.

• 전기화학회지
• /
• 제2권1호
• /
• pp.23-26
• /
• 1999

백금$(Pt)/0.1M\;H_2SO_4$, 전해질 계면에서 교류임피던스 측정과 위상이동 방법을 사용하여 Langmuir 흡착등온식을 정성적으로 해석하였다. 위상이동$(\phi)$은 음전위(E<0)와 주파수(f)에 따르며, Pt 일전극(음극)에 흡착된 수소원자$(H_{ads})$의 표면피복율$(\theta)$에 반비례한다. 중간주파수대$(1\~100 Hz)$에서 위상이동 변화$(\phi\;vs.\;E)$는 Langmuir 흡착등온식$(\theta\;vs.\;E)$의 계산과 해석에 사용할 수 있는 실험적인 방법이다. $Pt/0.1M\;H_2SO_4$ 전해질 계면에서 흡착평형상수(K)와 표준자유에너지$({\Delta}G_{ads})$는 각각 $3\times10^{_4}$와 20.1kJ/mol이다.

• 한국재료학회지
• /
• 제29권5호
• /
• pp.336-341
• /
• 2019

The gas adsorption isotherm requires accurate measurement for the analysis of porous materials and is used as an index of surface area, pore distribution, and adsorption amount of gas. Basically, adsorption isotherms of porous materials are measured conventionally at 77K and 87K using liquid nitrogen and liquid argon. The cold volume calibration in this conventional method is done simply by splitting a sample cell into two zones (cold and warm volumes) by controlling the level sensor in a Dewar filled with liquid nitrogen or argon. As a result, BET measurement for textural properties is mainly limited to liquefied gases (i.e. $N_2$ or Ar) at atmospheric pressure. In order to independently investigate other gases (e.g. hydrogen isotopes) at cryogenic temperature, a novel temperature control system in the sample cell is required, and consequently cold volume calibration at various temperatures becomes more important. In this study, a cryocooler system is installed in a commercially available BET device to control the sample cell temperature, and the automated cold volume calibration method of temperature variation is introduced. This developed calibration method presents a reliable and reproducible method of cryogenic measurement for hydrogen isotope separation in porous materials, and also provides large flexibility for evaluating various other gases at various temperature.

• 한국환경과학회지
• /
• 제21권6호
• /
• pp.687-694
• /
• 2012

Zeolite 4A was synthesized by fusion method from coal fly ash discharged at the thermal power plants. The synthesized zeolite(FAZ) was characterized through particle size analyzer, XRD, XRF and SEM. $N_2$ adsorption-desorption measurement was used to examine surface and pore structures. The adsorption experiments were carried out under dynamic conditions of trace $SO_2$ in $N_2$ to investigate $SO_2$ adsorption capacity of FAZ. The experiments were conducted to characterize the breakthrough characteristics of $SO_2$ in a fixed bed under different operating conditions including temperature(50-$125^{\circ}C$), concentration of $SO_2$(3000-10000 ppm) and FAZ with 4 kinds of commercial zeolite. The adsorption capacity of FAZ was 53.84 $mgSO_2/g$ adsorbent, larger than that of the same type commercial zeolite(WK4A).

• 펄프종이기술
• /
• 제37권1호
• /
• pp.1-9
• /
• 2005

Many factors which affect the adsorption of cationic polymers on fibers and fines have been investigated by many researchers that include contact time, pH, collision frequency, properties of cationic polymers and adsorbent, etc. But the effect of white water quality on the adsorption of cationic polymer have not been examined throughly. In this study, the adsorption of cationic PAM was analyzed as a function of white water quality. The adsorption of the cationic PAM was analyzed by two analysis methods, Kjeldahl nitrogen content measurement and electrokinetic measurements. When the distilled water was used, adsorbed amount of C-PAM and zeta-potential of fibers increased as a function of the addition of C-PAM. When closure level increased, nitrogen content of fibers increased indicating that the cationic PAM was adsorbed. Zeta-potential of fibers, however, showed no significant change with the increased addition of C-PAM. This showed that adsorption of C-PAM was not reflected by zeta-potential of fibers due to the deteriorated efficiency of C-PAM by the anionic contaminants in white water.

• 청정기술
• /
• 제14권1호
• /
• pp.47-52
• /
• 2008

흡착공정의 흡착속도를 표현하는 여러 가지 물질전달 모델들 가운데, 식의 형태가 비교적 간단한 선형추진력(Linear Driving Force, LDF) 모델이 많이 사용된다. 본 연구에서는 벤젠을 분리 및 제거하기 위한 실제 흡착공정에서 이 물질전달모델의 적용가능성을 알아보고자 하였다. LDF모델에 의한 전산모사 결과와 동적실험에서 구한 실험 값을 비교함으로써 흡착공정의 물질전달 계수를 구하였다. 여러 다른 값의 온도 및 압력에서 얻은 파과곡선을 이용하여 물질전달계수의 온도 및 압력에 대한 의존관계를 알아보았다. 물질전달계수의 온도와 압력에 대한 의존성은 각각, 아레니우스함수와 지수함수 형태의 경험식으로 표현할 수 있었다.