• 환경위생공학
• /
• 제17권3호
• /
• pp.99-109
• /
• 2002

Charcoal $tube/CS_2$ method are more popularly used than any other in the measurement of the working environment for the exposure evaluation of organic solvent, but it is some weak points that the lower accuracy can be obtained on the polar materials and within the range of the low concentration. Thus solvent desorption method has been developed to make accuracy higher and to overcome some weak points. However, because of high price of adsorption tube for thermal desorption and the short of study on its application to the working environment, it is not popularly used in the domestic industrial hygiene fields. This dissertation aims to develop thermal desorption and adsorption tubes for measuring organic solvents in the working environment, by comparing and analyzing breakthrough condition and adsorption capacity with ACF. Specific surface area of ACF used in this study is wider than the one of AC and micropore of ACF related with adsorption has been developed, and adsorption velocity and adsorption amount are very excellent by linking a pore of surface and an inside well into micropore. 1. Result of analysis on physical characteristics of adsorbent, the specific surface area of ACF was 1.3 times higher than that of AC. Distribution ratio of micropore related to adsorption was 94% on ACF and AC. Result of SEM, micropore of the AC is opened to the surface. In contrast, ACF shows that extremely fast adsorption speed. Because of micropore are exposed on the surface and penetrate through each other. 2. Breakthrough characteristics of adsorbents was not different from slop of breakthrough curve. The effluent concentration reaches 10% of initial concentration($C_{out}/C_{in}=0.1$, break point) of ACF was 30~316min longer than that of AC. Therefore, the adsorption capacities of ACF was 1.1~4.6 times higher than that of AC. ACF can be used as a proper adsorbent for measurement of organic solvent.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.409-410
• /
• 2012

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.368-372
• /
• 2009

흡착제의 흡착특성인 흡착표면적과 세공크기를 수정진동자를 이용하여 측정하는 방법을 제안하고 그 성능을 조사하였다. 액체질소를 활용하는 기존의 방법에 비해 상온에서 이산화탄소를 이용하기 때문에 장치가 소형이고, 조작이 간편하며 짧은 흡착시간 내 측정이 가능한 이점을 가지고 있다. 마이크로 입자의 카본 크라오젤과 대나무 활성탄에 대해 흡착특성을 측정한 측정치를 흡착능 측정기로 측정한 측정치와 비교한 결과 메조세공의 흡착제에 대해서는 유효한 측정치가 얻어진 반면 마이크로 세공의 입자에서는 다소 큰 오차를 나타내었다.

• Korean Chemical Engineering Research
• /
• 제48권3호
• /
• pp.405-408
• /
• 2010

박막의 흡착특성인 흡착표면적과 세공크기를 수정진동자를 이용하여 측정하는 새로운 방법을 제안하였으며 그 성능을 조사하였다. 수정진동자의 표면에 박막을 직접 제조하여 흡착능을 측정함으로써 박막상태에서 흡착능을 측정하였으며, 이산화탄소를 피흡착 기체로 사용하여 측정이 용이하도록 하였다. 흡착측정 결과로부터 흡착면적은 양호하게 측정이 가능함을 알 수 있었으나, 세공크기의 측정에는 다소 오차가 발생하였다. 간단히 구할 수 있는 이산화탄소를 이용하여 상온에서 박막상태 흡착제의 흡착능 측정이 가능함을 제시하였다.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.127-131
• /
• 2017

Isosteric heat of hydrogen adsorption is one of the most important parameters required to describe solid-state hydrogen storage systems. Typically, it is calculated from adsorption isotherms measured at 77K (liquid N2) and 87K (liquid Ar). This simple calculation, however, results in a high degree of uncertainty due to the small temperature range. Therefore, the original Sievert type setup is upgraded using a heating and cooling device to regulate the wide sample temperature. This upgraded setup allows a wide temperature range for isotherms (77K ~ 117K) providing a minimized uncertainty (error) of measurement for adsorption enthalpy calculation and yielding reliable results. To this end, we measure the isosteric heats of hydrogen adsorption of two prototypical samples: activated carbon and metal-organic frameworks (e.g. MIL-53), and compared the small temperature range (77~87K) to the wide one (77K ~ 117K).

• 한국광학회지
• /
• 제15권6호
• /
• pp.531-538
• /
• 2004

균일한 표면에서 일어나는 가파른 계단형식의 흡착에 대한 연구는 이차원 현상에 대한 이해를 한층 높일 수 있다. 이를 위해 편광변조 타원해석법을 이용한 흡착측정장치를 제작하였다. 타원해석법 신호가 흡착막 형성의 과정을 원자층 이하 (∼0.3 $\AA$)로 매우 예민하게 측정할 수 있음을 확인할 수 있었다. HOPG (highly oriented pyrolytic graphite) 표면에서의 아르곤의 흡착 다층막을 측정한 결과, 34.04 K에서는 수천여개의 흡착층이 형성되어 완전 젖음이 일어남을 관찰할 수 있었다. 또한 67.05 K에서는 선명한 계단 형식으로 일어나는 9개의 흡착과 탈착을 확인할 수 있었다. 이에서 얻은 등온흡착곡선들은 많은 열역학적 상태에 관한 정보, 표면과 기체의 결합에너지에 대한 정보, 흡착막의 구조전이에 대한 정보 등을 줄 수 있을 것이다.

• 분석과학
• /
• 제8권3호
• /
• pp.383-389
• /
• 1995

A new approach for the measurement of the surface coverages of monomolecular films fabricated by spontaneous adsorption of thiol compounds on gold is described. It is based on the mass change measurement with EQCM for the reductive electrochemical desorption of thiol in aqueous KOH solution. The results were compared with that of charge calculation during electrochemical desorption. The surface coverage value for eicosanethiol agrees with that obtained by charge calculation of electrochemical reduction as well as that expected from a geometrical model of the compact monolayer.

• Tribology and Lubricants
• /
• 제19권5호
• /
• pp.251-258
• /
• 2003

New method and device for the on-line measurement of soot concentration in a diesel engine oil are proposed, where the measurement principle is based mainly on attenuated internal total reflection. The detector were evaluated in various ranges of contaminated oils by carbon black particles. It was found that the proposed detector could be well used to monitor the oil deterioration due to soot contamination. Operational range of the detector was found from 0 to 5 mass percentage of soot content. Test results with water and fuel dilution showed that these effects were not remarkable. However, adsorption of carbon black particles onto the measurement surface was considered to be a critical problem of the detector. Effects of particle deposition on the interface was experimentally evaluated with the oil temperature and flow turbulence and discussed throughout this work.

• 공업화학
• /
• 제30권1호
• /
• pp.54-61
• /
• 2019

본 연구에서는 Cu(II)의 흡착처리 후, 용액 내 함유된 폐흡착제의 효율적인 분리를 위하여 제올라이트(zeolite 4A)의 표면에 금속(Me = Co, Mn, Ni)이 치환된 페라이트 나노 입자를 성장시킨 자성흡착제를 합성하였다. 제올라이트 표면의 금속 페라이트는 용매열 합성법으로 제조되었으며, 자성흡착제의 특성은 XRD (X-ray diffractometer), SEM (scanning electron microscopy) 및 PPMS (physical property measurement system)로 분석하였다. Co-ferrite가 코팅된 제올라이트 복합체(CFZC)의 포화자화율이 5 emu/g으로 가장 높았으며, Cu(II)의 흡착 성능도 우수하였다. CFZC에 의한 Cu(II)의 흡착결과 값들은 298 K에서 Langmuir식에 잘 적용되었다. 그리고 Cu(II)의 흡착공정은 유사 2차 속도식에 부합하였다. 자유에너지 변화값(${\Delta}G^0=-4.63{\sim}-5.21kJ/mol$)은 Cu(II)의 흡착이 298~313 K 범위에서 자발적임을 나타내었다.

• 한국환경과학회지
• /
• 제8권4호
• /
• pp.491-496
• /
• 1999

Removal of Cu(II), Cr(III) and Pb(II) ions from aqueous solutions using the adsorption process on the loesses has been investigated. Variations of contact time, pH, adsorption isotherms and selectivity of coexisting ions were experimental parameters. pH of KJ and YIK samples diluted to 1% solution, was rearly the same with each value of pH 5.58 and 5.49, and both samples showed weak acidic properties. From chemical analysis, both samples contain remarkably different amounts of ${SiO}_{2}$, ${Al}_{2}O_{3}$ and ${Fe}_{2}O_{3}$. From XRD measurement, quartz was mainly observed in both samples. Kaolinite was also observed, also in both samples, but Feldspar was only observed in KJ sample. Adsorption of metal ions on the loesses were reached at equilibrium by shaking for about 30min. The adsorption of Cr(III) ion was higher than that of Cu(II) oand Pb(II) ions. The order of amount adsorbed among the investigated ions was Cr(III)>Pb(II)>Cu(II). In acidic solution, the adsorptivity of loesses was increased as pH increased. The adsorption of Cr(III) ion on the loesses were fitted to the Freundlich isotherms. Freundlich constants(1/n) of KJ and YIK loesses were 0.54 and 0.55, respectively.