• Journal of Environmental Health Sciences
• /
• v.2 no.1
• /
• pp.5-9
• /
• 1975

For analysis of Xanthene dyes according to the developing solvent and adsorbent was applied to Thin-layer chromatography with silicagel and cellulose plate. Silicagel chromato-plate used were prepared under different condition of activation. Using eight developing solvent, the influence of the condition for activation upon the separation of Xanthene dyes was investigated. The results are shown in Table 3. Methyl ethyl ketone+Acetone+$H_2O$ (10:0.1:0.4) mixture and n-butanol+Ammonia water (4:1) mixture gave clear separation for Xanthene dyes, including Fluorescein, Erythrosine Rhodamin B, Eosine, Rose bengale, phloxine and Acid red those Rf values decrease in the described ordor. Methyl ethyl ketone+Acetone+$H_2O$ (10:0.1:0.4) was applied to two adsorbents which were purchased from different manufactures. The results of Chromatograms are obtained Figure 6.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.6 no.1
• /
• pp.59-66
• /
• 1988

One of the rising problems in the field of environmental engineering is the eutrophic phenomenon which appears in the closed water basin. This study is the elimination orthophosphate by adsorption, which is indispensible nutritive element for eutrophication Ziriconium(IV) oxide hydrate-activatedcarbon complex. which has excellent adsorptivity for orthophosphate and can easily be reused after desorption process has been made and used as adsorbents. The main purpose of this study is to obtain intraparticle diffusivity which is basic data for the design of adsorption operation the experimental results were as follows. 1. Optimum condition which gave maxinum adsorption of orthophosphate was ph5 2. Equilibrium adsorption showed good consistency with Freundlich type. q=10.80C1/2.08 3. Pore diffusivity and surface diffusivity obtained the kinetic experiment of batch adsorption were respectivity 5.38 and 2.06 ($\textrm{cm}^2$/sec)

• Carbon letters
• /
• v.11 no.3
• /
• pp.201-205
• /
• 2010

Activated carbons are well known as adsorbents for gases and vapors. Micro porous carbons are used for the sorption/separation of light gases, whereas, carbon with bigger pore size are applied for removal of large molecules. Therefore, the control of pore size of activated carbon plays a vital role for their use in specific applications. In the present work, steam activation parameters have been varied to control pore size of the resulting activated carbon. It was found that flow rate of steam has profound effect on both surface characteristic and surface morphology. The flow rate of steam was optimized to retain monolith structure as well as higher surface area.

• Carbon letters
• /
• v.12 no.1
• /
• pp.44-47
• /
• 2011

Activated carbon fibers (ACFs) were prepared from cost effective commercial textiles through stabilization, carbonization, and subsequently activation by carbon dioxide. ACFs were characterized for surface area and pore size distribution by physical adsorption of nitrogen at 77 K. ACFs were also examined for various surface characteristics by scanning electron microscopy, Fourier transform infrared spectroscopy, and CHNO elemental analyzer. The prepared ACFs exhibited good surface textural properties with well developed micro porous structure. With improvement in physical strength, the commercial textile grade acrylic precursor based ACFs developed in this study may have great utility as cost effective adsorbents in environmental remediation applications.

• 한국가스학회:학술대회논문집
• /
• 2003.10a
• /
• pp.233-237
• /
• 2003

• Microbiology and Biotechnology Letters
• /
• v.6 no.1
• /
• pp.33-40
• /
• 1978

Immobilization of alkaline protease was investigated by absorbing the enzyme on adsorbents. Alkaline protease was adsorbed on silica gel selected as a carrier to immobilize the enzyme. In this study, properties of the immobilized enzyme were compared with those of the soluble enzyme. 1) The optimum pH (10.0) of the enzyme was not changed, but the activity was increased at alkaline pH by immobilization. 2) The optimum temperature of the immobilized enzyme was shifted from 50$^{\circ}C$ to 45$^{\circ}C$, while the temperature-activity Profile became broader than those of the soluble enzyme. 3) The pH stability of the immobilized enzyme was significantely increased at pH 4.0, althouth it did not change in the neutral and alkaline pH region. 4) The heat stability of the enzyme was enhanced in the temperature range of 55$^{\circ}C$∼65$^{\circ}C$ by the immobilization. 5) The immobilized enzyme retained 40％ of its original activity after repetitive use for 6 times. 6) The enzyme stability was greately improved for a prolonged storage at 4$^{\circ}C$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.221.2-221.2
• /
• 2011

In this study, we prepared the magnesium oxide decorated ordered mesoporous carbons processed by the reduction of magnesium oxide precursor on the CMK-3 surfaces in order to investigate the characterization and the effect on their carbon dioxide adsorption behaviors. The magnesium contents of the prepared samples were characterized using XPS. The textural properties of the prepared samples were investigated by $N_2$/77 K adsorption isotherms by BET equation. The carbon dioxide adsorption capacities of the prepared samples were investigated by the amounts of carbon dioxide adsorptions at 298 K and 1.0 atm. The results showed that the magnesium oxide on the CMK-3 surface enhanced interaction between carbon dioxide and adsorbents. Consequently, it was found that the magnesium oxide led to an increase in the carbon dioxide adsorption capacity of the CMK-3.

• Textile Coloration and Finishing
• /
• v.4 no.2
• /
• pp.84-88
• /
• 1992

셀룰로오스 펄프에 폴리비닐알코올의 블랜드, 가교, 및 카복시메칠화한 아니온성 셀룰로오스계 고분자 흡착제에 대한 모델 카치온 염료, C.I. Basic Red 18의 흡착 및 탈색 성능을 수용액계(pH 4.2)에서 검토하였다. 아니온성 셀룰로오스 고분자 흡착제의 카치온 모델 염료의 흡착등온성은 저농도 영역에서 Sigmoidal 형을 나타내었고 Donnan 흡착 모델 기구로 해석하였다. 하전기 도입에 따라 염료의 흡착능은 증가하였으며 이 흡착능력은 Sodium이온의 첨가에 의하여 저하하였다. 또 아니온 셀룰로오스계 흡착제에 의한 모델 염료의 배수 탈색율은 크게 증가하였으며 입상활성탄보다 우수한 탈색능력을 나타내었다.

• Environmental Engineering Research
• /
• v.22 no.4
• /
• pp.384-392
• /
• 2017

Mango shell (MS) and mango shell activated carbon (MSAC) was used to adsorb crude oil from water at various experimental conditions. The MSAC was prepared by carbonization at $450^{\circ}C$ and chemical activation using strong $H_3PO_4$ acid. The adsorbents were characterized with Fourier Transform Infrared spectroscopy. Investigations carried out included the effects of parametric variations of different adsorbate dose, adsorbent dose, time, temperature, pH and mixing speed on the adsorption of crude oil. The equilibrium isotherm for the adsorption process was determined using Langmuir, Freundlich, Temkin and Dubinin Radushkevich isotherm models. Temkin isotherm was found to fit the equilibrium data reasonably well than others. The result demonstrated that MSAC was more effective for crude oil adsorption than raw mango shell. Optimum conditions were also presented. The enhanced effect from activation was justified statistically using Analysis of Variance and Bonferroni-Holm Posthoc significance test. The pseudo first order kinetics gave a better fit for crude oil adsorption with both MS and MSAC.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.473-482
• /
• 2009

Titanium dioxide particles are used as cosmetics, pigments, photocatalysts, adsorbents, catalytic supports, and sensors. The $TiO_2$ particles were prepared by the precipitation in TTIP/Solvent mixtures and calcined at different temperatures. The resulting materials were characterized by XRD and SEM testing techniques. The $TiO_2$ particles phase composition was determined by XRD ranging from amorphous to crystalline anatase and rutile largely proportional to the calcination temperature.