• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.98-100
• /
• 2003

The efficiency of the adsorption of adsorbents depends on both pore size and shape. In other to adsorb hydrated ion in application of electric double layer capacitor (EDLC), mesopore is necessary[1,2]. Tamai et al.[3] reported that an increased portion of mesopore was introduced through addition of metal or organometallic compound in the precursor and following activation of the carbon fibers with steam. (omitted)

• Archives of Pharmacal Research
• /
• v.2 no.2
• /
• pp.79-83
• /
• 1979

Using cephalosporium acremonium ATCC 14553, we studied on the important factors in fermentation. Those factors were :carbon and nitrogen sources, methionine effect, absorbent effect, fermentation variables in a batch fermentation variables in a batch fermentation, effect of reuse of its cellular biomass as a reusable nutrient, and 2, 4-dinitrophenol effect on cephalosprin C production.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.411-412
• /
• 2002

현재 많은 산업현장에서 휘발성 유기용제를 사용하고 있다. 국내 환경부에서 규제대상 VOC로 고시하고 있는 물질(환경부고시, '98. 7.1.)은 레이드 증기압, 광화학반응성, 물질사용량, 발암성 등 유해성을 감안하여 31개를 선정하여 규제하고 있으며 앞으로 규제대상 물질을 점차로 확대하여 나갈 계획으로 있다. 이에 한정된 자원의 고갈을 방지하고 환경의 보존을 위해 공정상에서 유기용제의 사용을 대체하는 것이 가장 이상적이나, 현재의 여건으로는 맡은 시간이 소요되므로 효율적인 휘발성 유기용제 처리공정 개발이 시급한 실정이다. (중략)

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.124.1-124
• /
• 2003

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.737-741
• /
• 1997

The typical removal method of volatile organic compounds is adsorption process. In this study, granular activated carbon and activated carbon fiber were used as adsorbents, and the adsorption behavior for the two types of adsorbent was compared. And they were regenerated by supercritical carbon dioxide extraction at a constant temperature, 318.15 K, and 2000, 2500, 3000 psi respectively. The desorption percentage of initial adsorbates and iodine values were increased with pressure of supercritical carbon dioxide. The regeneration time was 70 and 60 minutes in adsorbents loaded with methyl ethyl ketone(MEK) and benzene, respectively. The desorption percentages were 64.0% for granular activated carbon and 55.3% for activated carbon fiber loaded with MEK, and 59.1% for granular activated carbon and 45.2% for activated carbon fiber loaded with benzene. The exit concentration could be evaluated by Tan and Liou model. Therefore, the granular activated carbon and the activated carbon fiber could be regenerated by supercritical fluid extraction process.

• Clean Technology
• /
• v.21 no.2
• /
• pp.108-116
• /
• 2015

Hydrogen sulfide and ammonia are one of the common malodorous compounds that can be found in emissions from many sewages treatment plants and industrial plants. Therefore, removing these harmful gases from emissions is of significance in both life and industry because they can cause health problems to human and detrimental effects on the catalysts. In this work, pyrolytic carbon blacks from waste tires were used to develop adsorbent with good adsorption capacity for removal of hydrogen and ammonia. Pellet-type adsorbents were prepared by a mixture of carbon black, metal oxide and sodium hydroxide or hydrochloric acid, and their adsorption capacities were estimated by using breakthrough curve of a continuous fixed bed adsorption column at ambient condition. The adsorbent manufactured with a mixture of carbon black, iron oxide(III) and sodium hydroxide showed the maximum working capacity of hydrogen sulfide. For ammonia, maximum working capacity was obtained by the adsorbent manufactured with a mixture of carbon black, copper oxide(II) and hydrochloric acid.

• Carbon letters
• /
• v.26
• /
• pp.31-42
• /
• 2018

Adsorption is one of the best methods for wastewater purification. The fact that water quality is continuously decreasing requires the development of novel, effective and cost available adsorbents. Herein, a simple procedure for the preparation of a magnetic adsorbent from agricultural waste biomass and ferrofluid has been introduced. Specifically, ferrofluid mixed with wheat straw was directly pyrolyzed either by microwave irradiation (900 W, 30 min) or by conventional heating ($550^{\circ}C$, 90 min). Magnetic biochars were characterized by X-ray powder diffraction, $M{\ddot{o}}ssbauer$ spectroscopy, textural analysis and tested as adsorbents of As(V) oxyanion and cationic methylene blue, respectively. Results showed that microwave pyrolysis produced char with high adsorption capacity of As(V) ($Q_m=25.6mg\;g^{-1}$ at pH 4), whereas conventional pyrolysis was not so effective. In comparison to conventional pyrolysis, one-step microwave pyrolysis produced a material with expressive microporosity, having a nine times higher value of specific surface area as well as total pore volume. We assumed that sorption properties are also caused by several iron-bearing composites identified by $M{\ddot{o}}ssbauer$ spectroscopy ([super] paramagnetic $Fe_2O_3$, ${\alpha}-Fe$, non-stoichiometric $Fe_3C$, ${\gamma}-Fe_2O_3$, ${\gamma}-Fe$) transformed from nano-maghemite presented in the ferrofluid. Methylene blue was also more easily removed by magnetic biochar prepared by microwaves ($Q_m=144.9mg\;g^{-1}$ at pH 10.9) compared to using conventional techniques.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.62-67
• /
• 2016

In this study, a pellet-type adsorbent was prepared by using the water-treatment sludge as a raw material, and its physical and chemical properties were analyzed through $N_2$-adsorption, XRD, XRF, and $NH_3$-TPD measurements. Adsorption performance for gaseous ammonia and formaldehyde was compared between the pellet-type adsorbents prepared from water-treatment sludge and the impregnated activated carbon. Although the surface area and pore volume of the pellet-type adsorbent produced from water-treatment sludge were much smaller than those of the impregnated activated carbon, the pellet-type adsorbent produced from water-treatment sludge could adsorb ammonia gas even more than that of using the impregnated activated carbon. The pellet-type adsorbent prepared from water-treatment sludge showed a superior adsorption capacity for ammonia which can be explained by chemical adsorption ascribed to the higher amount of acid sites on the pellet-type adsorbent prepared from water-treatment sludge. In the case of formaldehyde adsorption, the impregnated activated carbon was far superior to the adsorbent made from the water-treatment sludge, which can be attributed to the increased surface area of the impregnated activated carbon.

• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.473-478
• /
• 2017

In this study, the guanidine compound, 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) was impregnated to three kinds of silica to prepare $CO_2$ adsorbents, and the $CO_2$ adsorption and physicochemical properties of the resulting adsorbents were investigated. The TBD amount of impregnation was changed and its effect on adsorption capacity and characteristics were studied. The physicochemical properties of TBD-impregnated silica were evaluated with $N_2$ adsorption/desorption, FT-IR, elemental analysis, and thermogravimetric analysis. The TBD-impregnated silica lowered the surface area and pore volume, and the increased impregnation amount of TBD made them further decrease. When TBD was 6 mmol/g, the $CO_2$ adsorption capacity was the highest at 7.3 wt%, and the adsorption capacity decreased due to the blocking phenomenon when the TBD amount increased.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.2
• /
• pp.99-113
• /
• 2016

In order to improve the portability of basic absorbents monoethanolamine (MEA) and glycine (Gly), both were supported on microporous activated carbon (AC). Chemical modification by alkali-metal ion exchange (of Li, Na, K) was carried out on Gly-based absorbents. All supported absorbents were subjected to $CO_2$ absorption capacity (pure $CO_2$) and selectivity (indoor level) tests. Textural and chemical characterizations were carried out on test sorbents. All impregnation brought about significant reduction of specific surface area and microporosity of the adsorbent Depreciation in the textural properties was found to result to reduction in pure $CO_2$ sorption. Contrarily, low-level $CO_2$ removal capacity was enhanced as the absorbent dosage increases, resulting in supported 5 molar MEA in methanol solution. Adsorption capacities were improved from 0.016 and 0.8 in raw ACs to 1.065 mmol/g for MEA's. Surface chemistry via X-ray photoelectron spectroscopy (XPS) of the supported sorbents showed the presence of amine, pyrrole and quaternary-N. In reducing sequence of potency, pyridine, amine and pyrrolic-N were noticed to contribute significantly to $CO_2$ selective adsorption. Furthermore, the adsorption isotherm study confirms the presence of various SNGs heterogeneously distributed on AC. The adsorption mechanism of the present AC adsorbents favored Freundlich and Langmuir isotherm at lower and higher $CO_2$ concentrations respectively.