• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.335-340
• /
• 2017

PURPOSE. Bacterial adhesion on provisional crown materials retained for a long time can influence the duration for which permanent prosthetic restorations can be healthily worn in the oral cavity. The aim of this study was to compare seven different commonly used provisional crown materials with regard to Streptococcus mutans and Candida albicans surface adhesion. MATERIALS AND METHODS. For each group, twenty specimens of the provisional fixed prosthodontic materials TemDent ($Sch{\ddot{u}}tz$), Imident (Imicryl), Tab 2000 (Kerr), Structur Premium (Voco), Systemp (Ivoclar Vivadent), Acrytemp (Zhermack), and Takilon-BBF (Takilon) were prepared (diameter, 10.0 mm; height, 2.0 mm). Surface roughness was assessed by atomic force microscopy. Each group was then divided into 2 subgroups (n=10) according to the microbial suspensions used: S. mutans and C. albicans. The specimens were incubated at $37^{\circ}C$ with S. mutans or C. albicans for seven days. Bacterial adherence on surfaces was assessed using the 2,3-bis[2-methyloxy-4-nitro-5-sulfophenyl]-2H-tetrazolium-5-carboxanilide (XTT) assay. RESULTS. S. mutans showed maximum adhesion to Structur, followed by Systemp, Acrytemp, Takilon, Tab 2000, Imident, and TemDent (P<.05). The highest vital C. albicans adhesion was noted on Takilon, followed by Imident and Tab 2000; the lowest adhesion was noted on Systemp (P<.05). CONCLUSION. The materials showed significant differences in the degree of bacterial adhesion. C. albicans showed higher surface adhesion than S. mutans on provisional crown and fixed partial denture denture materials.

• 폴리머
• /
• 제38권3호
• /
• pp.358-363
• /
• 2014

원자력현미경(AFM) tip을 표면 처리하여 임프린트용 acrylate 레진과의 접착력을 측정하였다. 표면 처리를 하지 않은 실리콘 tip에 비하여 $CH_4$ 플라즈마로 소수성 처리한 경우 접착력은 38% 감소한 반면 친수성의 $O_2$ 플라즈마로 처리한 경우에는 접착력이 1.6 배 증가하였다. 이러한 AFM 결과들은 정성적 실험 결과 밖에 얻을 수 없는 cross-cut 접착실험에 비하여 매우 구체적인 정량적 결과들을 제공하였다. 나노 크기의 임프린트 패턴을 전사하는 경우, 몰드와 레진 사이 접촉 면적이 커져서 시료 전체의 접착력이 커지기 때문에 패턴 크기가 작아지는 나노임프린트 공정에서는 몰드 표면 처리 문제가 더욱 중요하게 되는 것을 알 수 있었다.

• Elastomers and Composites
• /
• 제34권2호
• /
• pp.128-134
• /
• 1999

타이어 코드용 강철선을 RF 플라즈마를 이용한 acetylene 및 butadiene 가스의 플라즈마 중합으로 코팅하였으며, 타이어용 고무와의 접착력을 TCAT 또는 T-test로 측정하였다. 강철선의 접착력은 사용된 gas, plasma power, 코팅시간 및 가스 압력에 따라 측정하였으며, 플라즈마 중합에 앞서 Ar 플라즈마 에칭으로 타이어 코드를 세척하였다. 또한 $80^{\circ}C$의 증류수에서 7일간 노화시켜 접착력 저하를 고찰하였으며, 접착력 시험 후 타이어 코드 표면을 SEM으로 분석하여 파괴거동을 규명하고자 하였다. 가장 우수한 접착력은 acetylene의 경우 20W, 2분, 25mtorr에서, 그리고 butadiene의 경우는 l0W, 4분, 25mtorr에서 얻을 수 있었으며, Ar 에칭에 의한 접착력 변화는 없었다. 노화에 의한 접착력 저하는 없었으며, 도리어 증가하는 현상을 보였다. SEM 분석에서 강철선의 높은 거칠기와 플라즈마 코팅의 얇은 두께로 인하여 파괴거동 규명에는 한계가 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.308-313
• /
• 2006

The effect of coating time on surface properties of the TiN-coated high speed steel(SKH51) by arc ion plating is and presented in this paper. Surface roughness, micro-hardness, coated thickness, atomic distribution of TiN and adhesion strength are measured for various coating times. It has been shown that the coating time has a deep influence more than 60 minites on the micro-hardness, coated thickness, atomic distribution of Ti and adhesion strength of the SKH51 steels, but that the coating time has little influence on the surface roughness.

• 한국초지조사료학회지
• /
• 제34권1호
• /
• pp.60-67
• /
• 2014

본 연구는 조사료의 반추위 발효가 진행됨에 따른 볏짚표면에 부착된 섬유소 분해 박테리아의 군집변화와 섬유소 소화율을 비교 관측하기 위하여 볏짚의 in situ 반추 발효를 실시하였다. 그리고 부착 박테리아의 군집 변화를 측정하기 위하여 RT-PCR 기법을 이용하여 F. succinogenes. R. albus와 R. flavefaciens의 군집을 모니터링 하였다. 본 연구를 수행하기 위하여 in situ 볏짚 발효를 0. 2, 4, 8, 12, 24시간 실시하였을 때 반추위내 볏짚의 in situ 분해는 발효 시간이 진행됨에 따라 가속화되어 발효 8~12시간 사이에 최고 분해 속도를 나타내었으나, F. succinogenes, R. flavefaciens과 R. albus는 모두 발효 0~1시간 사이에 볏짚 표면에 부착이 80% 이상 완료되어 이후 발효가 계속 진행되는 동안 일정 수준의 군락을 유지하는 것이 발견되었다. 그리고 반추위내 유입된 조사료의 표면에 초기 부착과정을 관찰하기 위하여 0, 5, 10, 30 및 60분 간격으로 볏짚의 in situ 샘플을 채취하여 조사하였을 때 F. succinogenes, R. flavefaciens 및 R. albus의 군락 모두 볏짚이 반추위 유입 후 5분 내에 상당량의 수가 부착함을 발견하였다. 또한 조사료의 반추위 발효 용이성에 따른 섬유소 분해 박테리아의 부착 정도를 관찰하기 위하여 0, 2, 4 및 8% NaOH를 처리한 볏짚을 12 및 24시간 in situ 배양 볏짚의 소화율과 부착 박테리아의 군집 변화를 관측하였을 때, 볏짚의 NaOH 처리 농도가 높아짐에 따라 in situ 소화율이 증가하였으며, 동시에 부착된 박테리아 군집의 증가 경향이 F. succinogenes, R. flavefaciens 및 R. albus의 3균주 모두 배양 12시간에 나타났으나 배양 24시간에서는 각기 다른 양상을 나타냈다. 따라서 본 연구결과는 반추위내 섬유소 발효과정에서 섬유소 분해 박테리아의 부착은 조사료의 반추위 유입 초기에 반드시 이루어지고, 발효 시간이 진행됨에 따라 조사료 표면에 안정된 군락을 형성하며, 섬유소 분해가 가속화된다는 사실을 보여 주었다.

• 한국환경보건학회지
• /
• 제44권3호
• /
• pp.238-243
• /
• 2018

Objectives: The purpose of this study was to determine skin adhesion rate of children's modeling clay for exposure assessment. Methods: Children's modeling clays were classified into 10 categories as PVA clay, PVA soft clay, starch-based clay, foam clay, rubber clay, oil clay, muddy clay, terra clay, paper clay and slime. A total of 26 children's clay goods was selected. Moisture content (%) and hardness of clays were measured. Five adults aged 20 to 25were recruited for experiment. Gravimetric difference of modeling clay was determined after 3 minutes playing time. Skin adhesion rate ($g/min/cm^2$) was estimated bythe amount of skin adhesion per minute (g/min) and each individual's palm surface area ($cm^2$). Results: Twenty four of the 26 children's modeling clay products were adhesive to skins. Two products of foam and rubber clay were not adhered to skin. For the 24 products, the average skin adhesion rate was $5.5{\times}10^{-4}{\pm}4.0{\times}10^{-4}g/min/cm^2$. The highest skin adhesion rate was $1.3{\times}10^{-3}{\pm}4.4{\times}10^{-4}g/min/cm^2$ for paper clay. The lowest skin adhesion rate was $4.6{\times}10^{-5}{\pm}1.1{\times}10^{-4}g/min/cm^2$ for oil clay. The skin adhesion rate was increased with increase of moisture content. Adhesion rates of some clays were varied by person and testing trials. Conclusion: The study determined skin adhesion rate of children's modeling clay. The adhesion rate is useful for exposure and risk assessments and setting safety guideline to protect children's health.

• Elastomers and Composites
• /
• 제37권1호
• /
• pp.49-56
• /
• 2002

UV 조사시간과 오존유량을 변화시키면서 폴리프로필렌을 UV/오존 산화하였으며 이의 표면특성을 접촉각과 XPS를 이용하여 살펴보았다. 산화된 표면의 노화거동을 공기, 물, 에틸렌 글리콜 하에서 살펴보았으며, 또한 lap shear 실험을 통하여 접착력을 관찰하였다. 극성표면 에너지와 접착력은 UV/오존 처리시간과 오존유량이 증가함에 따라 증가함을 알 수 있었다. 물에서 노화실험을 한 경우 극성표면 에너지의 변화가 없었으나, 공기 하에서 실시한 경우 2-3일 이내에 급격히 감소하여 처리하지 않은 폴리프로필렌의 값에 근접하였다.

• Journal of Microbiology and Biotechnology
• /
• 제11권6호
• /
• pp.922-927
• /
• 2001

In an effort to regulate the mammalian cell behavior in entrapment with a gel, we have functionalized hydrogels with the putative cell-binding (-Arg-Gly-Asp-)(RGD) domain. An adhesion molecule of Gly-Arg-Gly-Asp-Ser (GRGDS) peptides, a cell recognition ligand, was induced into thermo-reversible hydrogels, composed of N-isopropylacrylamide with small amounts of acrylic acid (typically 2-5 $mol\%$ in feed), as a biomimetic extracellular matrix (ECM). The GRGDS containing a p(NiPAAm-co-AAc) copolymer gel was studied in vitro for its ability to promote the spreading and viability of cells by introducing a GRGDS sequence. Hydrogel with no adhesion molecule was a poor ECM for adhesion, permiting spreading of only $3\%$ of the seeded cells for 36h. By immobilizing the peptide linkage into the hydrogel, the conjugation of RGD promoted $50\%$ of proliferation for 36h. However, the GREDS sequence, nonadhesive peptide linkage, conjugated hydrogel showed only $5\%$ of the seeded cell for the same time period. In addition, with the serum-free medium, only GRGDS peptides conjugated to hydrogel was able to promotecell spreading, while there was no cell proliferation in the hydrogel without GRGDS. Thus, the GRGDS peptide-conjugated thermo-reversible hydrogel specifically mediated the cell spreading. This result suggests that utilization of peptide sequences conjugating with the cell-adhesive motifs can enhance the degree of cell surface interaction and influence the long-term formation of ECM in vitro.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1995년도 춘계학술대회
• /
• pp.97-97
• /
• 1995

On the combination of antacid, the pharmacokinetics and gastric adhesion of $\^$14/C-aceglutamide aluminum complex($\^$14/C-AGA) were examined in rats. Specially, This study was focused on the drug interaction that the coadministration of antacid may affect the oral absorption and gastric adhesion of aceglutamide aluminum complex(AGA). After the oral administration of $\^$14/C-AGA and antacid to rats, the radioactivity of plasma and urinary recovery was lower than that of $\^$14/C-AGA administered group. Relatively, the cumulative recovery of radioactivity in feces was increased significantly. The comparative bioavailability of $\^$14/C-AGA from the plasma concentration-time curve and urinary recovery was about 60%. in vitro, the effect of antacid in the gastric adhesion of AGA was not significantly different between AGA and AGA/antacid treatment. And it accorded well with the result of in vivo experiment. In conclusion, on the combination of antacid, the oral absorption of AGA was decreased but the gastric adhesion was not affected in respect of drug interaction.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.75-80
• /
• 2005

Study for toner adhesion is known as an important role in electrophotography. In this research, a centrifugal detachment method was used to measure the adhesion force of several hundred particles simultaneously and to determine its sensitivity to particle size. For uncharged toner particles, we estimated the van der Waals force based on the centrifugal farce experiments. Then for charged toner particles, the centrifugal force experiments were carried out. The difference between the results for charged toner particles and the results for uncharged toner particles was compared with the image force calculated from a model which assumed that the toner charge was located at the center of the particle. In the calculations, experimental data obtained by E-SPART (Electrical- Single Particle Aerodynamic Relaxation Time) analyzer were used. The adhesion force of micro-sized toner particles deposited on the DR surface was found to be approximately 1${\~}$3 nN.