• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.88-91
• /
• 2003

Tungsten is widely used as a plug for the multi-level interconnection structures. However, due to the poor adhesive properties of tungsten (W) on $SiO_2$ layer, the Ti/TiN barrier layer is usually deposited onto $SiO_2$ for increasing adhesion ability with W film. Generally, for the W-CMP (chemical mechanical polishing) process, the passivation layer on the tungsten surface during CMP plays an important role. In this paper, the effect of oxidants controlling the polishing selectivity of W/Ti/TiN layer were investigated. The alumina ($Al_2O_3$) abrasive containing slurry with $H_2O_2$ as the oxidizer, was studied. As our preliminary experimental results, very low removal rates were observed for the case of no-oxidant slurry. This low removal rate is only due to the mechanical abrasive force. However, for Ti and TiN with $H_2O_2$ oxidizer, different removal rate was observed. The removal mechanism of Ti during CMP is mainly due to mechanical abrasive, whereas for TiN, it is due to the formation of metastable soluble peroxide complex.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.152-152
• /
• 2017

Titanium and its alloys have been widely used for biomedical applications. However, the use of the Ti-6Al-4V alloy in biomaterial is then a subject of controversy because aluminum ions and vanadium oxide have potential detrimental influence on the human body due to vanadium and aluminum. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element,such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}$-stabilizer and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Silicon (Si) and magnesium (Mg) has a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. In vitro studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. Therefore, in this study, Si and Mg coatings on the hydroxyapatite film formed Ti-29Nb-xHf alloys by plasma electrolyte oxidation has been investigated using several experimental techniques. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. The electrolyte was Si and Mg ions containing calcium acetate monohydrate + calcium glycerophosphate at room temperature. The microstructure, phase and composition of Si and Mg coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.

• Food Science of Animal Resources
• /
• v.38 no.3
• /
• pp.554-569
• /
• 2018

This study aimed to investigate the physiological characteristics and anti-obesity effects of Lactobacillus plantarum K10. The ${\alpha}-amylase$ inhibitory activity, ${\alpha}-glucosidase$ inhibitory activity, and lipase inhibitory activity of L. plantarum K10 was $94.66{\pm}4.34%$, $99.78{\pm}0.12%$, and $87.40{\pm}1.41%$, respectively. Moreover, the strain inhibited the adipocyte differentiation of 3T3-L1 cells ($32.61{\pm}8.32%$) at a concentration of $100{\mu}g/mL$. In order to determine its potential for use as a probiotic, we investigated the physiological characteristics of L. plantarum K10. L. plantarum K10 was resistant to gentamycin, kanamycin, streptomycin, ampicillin, ciprofloxacin, tetracycline, vancomycin, and chloramphenicol. It also showed higher Leucine arylamidase, Valine arylamidase, and ${\beta}-galactosidase$ activities. Moreover, it was comparatively tolerant to bile juice and acid, exhibiting resistance to Escherichia coli, Salmonella Typhimurium, Listeria monocytogenes, and Staphylococcus aureus with rates of 90.71%, 11.86%, 14.19%, and 23.08%, respectively. The strain did not produce biogenic amines and showed higher adhesion to HT-29 cells compared to L. rhamnosus GG. As a result of the animal study, L. plantarum K10 showed significantly lower body weight compared to the high-fat diet group. The administration of L. plantarum K10 resulted in a reduction of subcutaneous fat mass and mesenteric fat mass compared to the high-fat diet (HFD) group. L. plantarum K10 also showed improvement in gut permeability compared to the HFD positive control group. These results demonstrate that L. plantarum K10 has potential as a probiotic with anti-obesity effects.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.31-38
• /
• 2018

The effects of polymer-binder ratio and metakaolin content on the properties of ultrarapid-hardening polymer-modified concretes using metakaolin are examined. As a result, regardless of the metakaolin content, the flexural, compressive and adhesion in tension strength of the ultrarapid-hardening polymer-modified concretes tend to increase with increasing polymer-binder ratio. Regardless of the polymer-binder ratio, the strengths of the ultrarapid-hardening polymer-modified concretes increase with increasing metakaolin content, and reaches a maximum at metakaolin content of 5%. The water absorption, carbonation depth and resistance of chloride ion penetration of the ultrarapid-hardening polymer-modified concretes decrease with increasing polymer-binder ratio. The resistance of freezing and thawing improvement is attributed to the improved bond between cement hydrates and aggregates because of the incorporation of polymer dispersion.

• Journal of the Society of Disaster Information
• /
• v.11 no.2
• /
• pp.235-243
• /
• 2015

The methods to improve the protection and explosion-proof performance of concrete structures include the backside reinforcement or concrete material property improvement and the addition of structural members or supports to increase the resistance performance, but they are inefficient in terms of economics and structural characteristics. This study is about the basic study on the fiber composite panel cover, and the nano-composite material and adhesive as the filler, to maximize the specific performance of each layer and the protection and explosion-proof performance as the composite panel component by improving the tensile strength, light weight, adhesion and fire-proof performances. The fiber composite panel cover (aramid-polyester ratios of 6:4 and 6.5:3.5) had a 2,348 MPa maximum tensile strength and a 1.8% maximum elongation. The filler that contained the nano-composite material and adhesive had a 4 MPa maximum tensile shear adhesive strength. In addition, the nano-composite filler was 30% lighter than the normal portland cement

• Journal of Oral Medicine and Pain
• /
• v.38 no.2
• /
• pp.143-147
• /
• 2013

Mouth opening limitation is generally caused by masticatory muscle or temporomandibular joint pain, disc dislocation without reduction, adhesion or ankylosis of the temporomandibular joint, and muscle contracture. But otorhinolaryngologic disease, neurologic and vascular disease, tumor, inflammation and infection may cause pain and mouth opening limitation which mimics temporomandibular disorders. Re-evaluation for possibilities of inflammation, infection and tumor should be in cases that do not show symptom improvement or appear with continuous aggravation despite of proper treatment. In this case, we report of medial pterygoid muscle pain and mouth opening limitation caused by periapical abscess of third molar spread to the pterygomandibular space.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.700-702
• /
• 2005

A 5.0-inch transmissive type plastic TFT arrays were successfully fabricated on a plastic substrate at the resolution of $400{\times}3{\times}300$ lines (100ppi). All of the TFT processes were carried out below $150^{\circ}C$ on PES plastic films. After thin film deposition using PECVD, thin film failures such as film delamination and cracking often occurred. For successful growth of thin films (about 1um) without their failures, it is necessary to solve the critical problem related to the internal compressive stress (some GPa) leading to delamination at a threshold thickness value of the films. The Griffith's theory explains the failure process by looking at the excess of elastic energy inside the film, which overcomes the cohesive energy between film and substrate. To increase the above mentioned threshold thickness value there are two possibilities: (i) the improvement of the interface adhesion (for example, through surface micro-roughening and/or surface activation), and (ii) the reduction of the internal stress. In this work, reducing a-Si layer film thickness and optimizing a barrier SiNx layer have produced stable CVD films at 150oC, over PES substrates

• Journal of Veterinary Clinics
• /
• v.20 no.3
• /
• pp.369-375
• /
• 2003

The ultrasonography was performed in 77,924 subestrous dairy cows from 680 dairy farms at 57 districts. The cows were examined for confirmation of resumption of ovaries and uterus after 30 days postpartum, for early pregnancy diagnosis after 30 days post-insemination, confirmation of pregnancy at 8 month post-insemination, and for diagnosis of reproductive dysfunctions, respectively. The results of reproductive examination by ultrasonography in 77,924 dairy cows were ovarian disorders 35,452 (46.8%), uterine disorders 10,721 (13.8%), pregnancy and pregnant failure 24,044 (30.8%), adhesion of reproductive tracts 167 (0.2%), freematins 13 (0.01%) and others 6,527 (8.4%) cows, respectively. The 13,732 (49.6%) cows out of 27,694 cows were treated for silent heat or error of estrus detection, 3,473 (12.5%) cows for follicular cysts, 815 (3.0%) cows for luteal cysts, 606 (2.2%) cows for inactive ovaries, 4 (0.01%) cows for granulosa cell tumors, and 6,455 (23.3%) cows for endometritis, respectively. The indices of reproductive efficiencies before (2001-08-10) and after (2003-07-20) periodical examination of reproductive status were as follows; the mean intercalving interval were shortened from 471 days to 383 days, the mean interval calving to conception were shortened from 187 days to 99 days, the mean interval calving to first service were shortened from 105 days to 67 days, the mean cows showing heat by 60 days postpartum were increased from 33% to 89%, the mean conception rate to first service were increased from 43% to 68%, and the mean service per conception were shortened from 2.6 times to 1.8 times, respectively. These results suggest that periodical examination of reproductive status would be useful for the improvement of the reproductive performance in dairy cows.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.587-593
• /
• 2001

In this work, red mud (RM) was chemically modified by 0.1, 1, and 5 M H3PO4 solution to prepare epoxy/RM nanocomposites. The effect of chemical treatment on pH, acid-base values, specific surface area, and porosity of RM surface was analyzed. To estimate the mechanical interfacial properties of epoxy/RM nanocomposites, the critical stress intensity factor (K$_{IC}$) was measured. From the experimental results, it was clearly revealed that the porosity, specific surface area, and acid values of RM surface were developed as the increase of the treatment concentration due to the increase of acidic functional group, including hydroxyl group on RM surface. The mechanical interfacial properties of epoxy/treated-RM nanocomposites were higher than those of epoxy/RM as-received due to an improvement of interfacial bonding between basic matrix and RM surface.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.673-681
• /
• 2000

Electrically conductive composites have been prepared by treating fabrics with oxidizing agent and exposing them to aniline, which deposited a substantial amount of conductive polymer within the interstices of the material. However the conductivity of the composite fabrics was limited by the irregular deposition of the conductive polymer layer. To improve the conductivity of polyaniline/nylon 6 composite fabrics, we modified the surface characteristics of nylon 6 fabrics by various plasma treatments and increased diffusion and adsorption of aniline by ultrasonic treatments. By the oxygen plasma treatment, attachment of functional groups such as C-O and C-OH increased on the surface of nylon 6 fiber, which promoted adhesion to polyaniline resulting in the higher add-on and electrical conductivity. Electrical conductivities of polyaniline/nylon 6 composite fabrics were highly increased by ultrasonic treatment, which assisted the diffusion of aniline into the inside of nylon fabrics by cavitation and vibration. Also, the effects of monomer concentration and the number of deposition cycles on the nylon 6 fabric conductivity Were investigated. As a result, the fabric conductivity increased with the monomer concentration and the number of polymerization deposition cycles.