• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.121-122
• /
• 2000

The understanding of reset scheme is essential for the driving of AC PDP (Plasma Display Panel). The characteristics of reset period of AC PDP was examined with the variation of pulse time and voltage in the ADS (Address Display Separated) driving method presented by Fujitsu,. The addressing characteristics showed drastic change as a function of the erasing time and addressing pulse width. In this paper, these results were explained by the change of wall charge variation, and it was estimated with the currents through each electrode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1406-1407
• /
• 2007

본 논문에서 제안한 ac-PDP(Plasma display panel) 셀구조는 Long gap의 전극 사이에 보조 전극을 삽입한 구조이다. 일반적으로, long gap 구조를 가진 PDP cell은 높은 방전 개시 전압을 가지므로, Long gap 전극 사이에 보조전극을 삽입하여 방전 개시 전압을 낮춤과 동시에 휘도 상승, 소비 전력의 감소효과로 발광효율의 향상을 가져왔다. 제안한 구조의 구동을 위하여 asymmetric mode와 long gap mode라는 2가지 파형을 가지고 실험하였다. 두 파형은 공통적으로 기존의 ADS(Address and Display period Separated)파형을 Y(Scan), Z(Common), A(Address) 전극에 인가하였으며, 보조적극에는 Z(Common) 전극의 파형을 수정한 형태로 인가하였다. Asymmetric mode는 보조전극에 Z(Common) 전극에 인가되는 파형과 같은 형태의 파형을 인가하여 Long gap의 구조를 가지지만 Short gap에서 방전이 가능하도록 설계하였고, long gap mode는 보조전극에 인가되는 Z(Common) 파형 중 sustain pulse를 초기 3개만을 주어 Short gap에서 방전을 개시함과 동시에 priming 입자를 생성하고, 나머지 sustain 구간에서는 floating시켜 이미 생성된 priming 입자를 long gap에서 구동을 가능하도록 하였다.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.586-590
• /
• 2009

Recently, an AC Plasma Display Panels(PDP) with the metal sustain electrodes have been reported in order to reduce the manufacturing cost of the AC PDP. However, the luminance and efficacy of the AC PDP with metal electrodes are worse than those of the AC PDP with ITO electrodes. In this paper, various ${\prod}$type metal electrodes are suggested, in order to improve the electro-optical characteristics of the AC PDP with metal electrodes. Among the suggested electrode types, luminance of Hump electrode structure is higher by $40\;cd/m^2$ and discharge current of Asymmetry electrode structure is lower by 5% than those of Pi electrode structure, respectively. Moreover, $T_1$ of Hump electrode structure is reduced to 10% as compared with Pi electrode structure in address period for ADS driving scheme. In all aspects, the characteristics of Hump and Asymmetry electrode structure show best performance.

• Journal of Power Electronics
• /
• 제13권5호
• /
• pp.779-786
• /
• 2013

A highly efficient sustaining driver is proposed for plasma display panels (PDPs). When the PDP is charged and discharged, the proposed sustaining driver employs an address voltage source used in an addressing period. A voltage source is used for fully charging the panel to the sustaining voltage, and an initial inductor current helps the panel discharge to 0 V. The resonance between the panel and an inductor is made by shifting the voltage and current bias level when charging and discharging the panel. As a result, the proposed circuit can reduce power consumption, switching loss, heat dissipation, and production cost. Experimental results of a 42-inch PDP are provided to verify the operation and features of the proposed circuit.

• 통상정보연구
• /
• 제15권2호
• /
• pp.261-283
• /
• 2013

ISBP745에서는 기존 ISBP에서는 규정하고 있지 않던 해상운송장 및 도로, 철도, 내수로 운송서류를 규정하여 규정의 폭을 넓혔다. 종래의 ICC Opinion과 다르거나 없었던 ISBP745의 주요 개정사항을 요약하면 다음과 같다. 첫째, 운송루트가 복합운송이면서 선하증권을 요구한 경우 UCP600 제19조 복합운송서류 규정이 적용되는 것으로 종래의 ICC Opinion과는 다르게 개정되었다. 둘째, 신용장에서 착하인도 대리점의 주소와 명칭의 운송서류 기재를 요구할 때 이 주소가 최종목적지 또는 하역항에 위치 할 필요가 없을 뿐만 아니라 동일 국가에 위치할 필요도 없다는 규정이 신설되었다. 셋째, 여러 사람의 송하인과 한 사람의 수하인이 있는 LCL/FCL 운송의 경우에는 복수의 운송서류가 발행되는데 이에 대한 사례를 구체적으로 규정하고 있다. 그러나 운송업계에서 이러한 경우에 흔히 표시하고 있는 "LCL/FCL" 또는 "CFS/CY"의 기재를 복수의 운송서류가 요구되는 사례로 규정하지 않음으로써 실무적으로 혼란을 야기할 수 있다는 문제가 있다. 넷째, 신용장에서 분할선적이 허용되고, 복수의 운송서류가 하나의 표지서류에 따라 제시될 때 서류 제시기간의 기산일을 운송서류 중 최초의 선적일을 기준으로 한다는 규정이 신설되었다.

• 대한전자공학회논문지SD
• /
• 제41권1호
• /
• pp.1-8
• /
• 2004

Quantized memory addressing (QMA) 이론을 바탕으로 새로운 PDP 계조 구현을 수행하는 방법을 개발하였다. 어드레스 펄스 폭을 조절함에 따라 셀에 기입되는 벽전하 양은 "fully on", "off" 그리고 "half on"의 세 단계를 가지게 된다. 이 세 단계의 벽전하를 이용하여 7개의 서브필드로 255단계의 계조를 표현할 수 있다. 더욱이 기존의 구동 방법과는 달리 인접한 두 계조를 표현하기 위해 사용하는 서브필드들이 동영상 의사윤곽을 제거한다. 이 방법은 7개의 서브필드를 사용함으로써 12개의 서브필드를 이용하여 동영상 의사 윤곽을 저감시킨 방법에 비해 유지 방전 시간을 $70\%$이상 증가시킨다.

• ETRI Journal
• /
• 제39권4호
• /
• pp.582-591
• /
• 2017

To address the wire complexity problem in large-scale globally asynchronous, locally synchronous systems, a current-mode ternary encoding scheme was devised for a two-phase asynchronous protocol. However, for data transmission through a very long wire, few studies have been conducted on reducing the long propagation delay in current-mode circuits. Hence, this paper proposes a current steering logic (CSL) that is able to minimize the long delay for the devised current-mode ternary encoding scheme. The CSL creates pulse signals that charge or discharge the output signal in advance for a short period of time, and as a result, helps prevent a slack in the current signals. The encoder and decoder circuits employing the CSL are implemented using $0.25-{\mu}m$ CMOS technology. The results of an HSPICE simulation show that the normal and optimal mode operations of the CSL achieve a delay reduction of 11.8% and 28.1%, respectively, when compared to the original scheme for a 10-mm wire. They also reduce the power-delay product by 9.6% and 22.5%, respectively, at a data rate of 100 Mb/s for the same wire length.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1189-1192
• /
• 2007

We propose new driving schemes, asymmetry and long gap mode, of PDP having auxiliary electrode between scan and common electrode. For the asymmetric modes, the auxiliary electrode located nearly center of the primary electrodes is connected to the scan of common electrode during all periods of reset, address and sustain. For the long gap mode, it is electrically disconnected or maintained at dc voltage of Vs/2 during sustain period except the first several sustain pulses. The proposed structure and driving method can provide higher luminous efficacy by minimizing consumption energy. The effectiveness of the new driving schemes has been investigated for various Xe partial pressure conditions.

• 한국전기전자재료학회논문지
• /
• 제21권10호
• /
• pp.916-922
• /
• 2008

AC PDP with MgO protective layer coated with the optimum evaporation rate of $5{\AA}/s$ can generate more enhanced efficiency through the vacuum in-line sealing process. However, the optimized process conditions still require the optimum driving scheme on the ramp-up and ramp-down slope of the reset waveform for enhancing the efficiency. In this paper, for the in-situ vacuum sealed PDP with the optimum evaporation rate of MgO protective layer, the address delay time was investigated with various slopes of ramp waveform during a reset ramp-up and ramp-down period. In this study, the minimum statistical delay time was obtained at the ramp-up rate of $6.0 V/{\mu}s$ and the ramp-down rate of $0.7 V/{\mu}s$ of the reset waveform.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.243-243
• /
• 2015

Low-flow simulation and forecasting is one of the emerging issues in hydrology due to the increasing demand of water in dry periods. Even though low-flow simulation and forecasting remains a difficult issue for hydrologists better simulation and earlier prediction of low flows are crucial for efficient water management. The UN has never stated that South Korea is in a water shortage. However, a recent study by MOLIT indicates that Korea will probably lack water by 4.3 billion m3 in 2020 due to several factors, including land cover and climate change impacts. The two main situations that generate low-flow events are an extended dry period (summer low-flow) and an extended period of low temperature (winter low-flow). This situation demands the hydrologists to concentrate more on low-flow hydrology. Korea's annual average precipitation is about 127.6 billion m3 where runoff into rivers and losses accounts 57% and 43% respectively and from 57% runoff discharge to the ocean is accounts 31% and total water use is about 26%. So, saving 6% of the runoff will solve the water shortage problem mentioned above. The main objective of this study is to present the hydrological modelling approach for low-flow simulation and forecasting using a model that have a capacity to represent the real hydrological behavior of the catchment and to address the water management of summer as well as winter low-flow. Two lumped hydrological models (GR4J and CAT) will be applied to calibrate and simulate the streamflow. The models will be applied to Seolmacheon catchment using daily streamflow data at Jeonjeokbigyo station, and the Nash-Sutcliffe efficiencies will be calculated to check the model performance. The expected result will be summarized in a different ways so as to provide decision makers with the probabilistic forecasts and the associated risks of low flows. Finally, the results will be presented and the capacity of the models to provide useful information for efficient water management practice will be discussed.