• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.245-250
• /
• 2006

This study was focused on the use of cationic PAM (Polyacrylamide) as a surface sizing additive to improve the surface sizing properties of paper. Effects of the ionic property, viscosity and charge density of PAM on bending stiffness of surface sized papers were investigated. Use of cationic PAM as a surface sizing additive improved bending stiffness while addition of anionic PAM did not show any effect. Increase of starch holdout with the addition of cationic PAM was attributed as a prime reason of stiffness increase. Viscosity of PAM was one of the most important factors affecting surface sizing due to its influence on the interaction between cationic PAM and oxidized starch solution. Greater improvement of bending stiffness of paper was obtained when high charged PAM was used as an additive. The order of addition was found to have significant influence on the effect of additives since it influences the formation of network structure among starch, cationic PAM, and SA (styrene acrylic acid copolymer). Investigation on the penetration of starch solution was carried out with CLSM (Confocal Laser Scanning Microscopy), and it was shown that the addition of cationic PAM to oxidized starch solution made starch molecules stay on the paper surface rather than penetrating into the paper structure because of the electrostatic interaction between negatively charged fibers and positively charged cationic PAM.

• Journal of Life Science
• /
• v.7 no.1
• /
• pp.59-65
• /
• 1997

In this experiment, gene actions were analysized for seven barley parents in order to obtain basic information on their genetic improvement by diallel crosses. The results obtained were summarized as follows. In analysis of variance, additive, dominant, maternal and reciprocal effects were observed significantly for culm length, tiller number, number of spiked per plant, culm diameter, awn length, leaf width, number of grains per spike, and 1000 grain weight. Over-dominance was shown by Vr-Wr graphic analysis in five characters such as tiller number, number of spikes per plant, length of flag leaf, number of grains per spike, and 1000 grain weight, and partial dominance in four characters such as culm length, culm diameter, awn length, and leaf width. Component of genetic varience analyzed for four characters such as culm diameter, awn length, length of flag leaf, and leaf width showed that additive effects were higher than dominant effects. Culm length, tiller number, number of spikes per plant, number of grains per spike, and 1000 grain weight showed dominant effects higher than additive effects. The narrow-sense heritability for awn length, leaf width, and number of grains per spike showed high values as more than 0.62, while broad-sense heritability for culm length, number of spikes per plant, culm diameter, awn length, leaf width, number of grains per spike, and 1000 grain weight showed high values as more than 0.65.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.3
• /
• pp.295-300
• /
• 1995

Data from purebred and crossbred cattle involving Holstein and the Local breed in Bangladesh were used to estimate the genetic effects on average daily milk yield and birth weight A total of 877 records on average daily milk yield for 4 types of breed groups and a total of 418 records on birth weight for 5 breed groups were analyzed. Two different methods were applied in this study; the least squares analysis of variance approach and the linear regression approach. Breed group effects were highly significant for both average daily milk yield and birth weight. The result showed that straightbred Holstein produced the highest milk yield and the 7/8 crosses ranked highest in birth weight For the two traits, the additive breed effect was highly significant, whereas the individual heterosis effect was not significant. Furthermore, this study showed a negative maternal heterosis for average daily milk yields and a positive maternal heterosis for birth weight Comparing the breed least squares means obtained from the linear regression approach revealed that straightbred Holstein produced the highest average milk yield and the 3/4 crosses were predicted to have the largest birth weight. It is indicated that the linear regression approach can adequately separate the genetic component of performance, estimate unknown crossbreeding parameters and predict unknown performance of crosses which are not include in the original data.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2180-2185
• /
• 2003

Numerical simulations of freely propagating flames burning $H_2/HCl/Air$ mixtures are performed at atmospheric pressure in order to understand the effect of HCl on the NOx reduction. A chemical kinetic mechanism is developed, which involves 26 gas-phase species and 99 reactions. Under several equivalence ratios the flame speeds are calculated and compared with those obtained from the experiments, the results of which is in good agreement. As HCl is added into $H_2/Air$ flame as additive, its chemical effect causes the reduction of radicals (H, OH, and O), and then the decrease of the net rate of NO production. It is found that the chemical effect of additive has much more influence on the reduction of EINO than its physical effect.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.209-214
• /
• 2003

Numerical simulations are performed at atmospheric pressure in order to understand the effect of additives on flame speed, flame temperature, the radical concentration, the NOx formation in freely propagating $CH_4/O_2/N_2$ flames. The additives used are carbon dioxide and hydrogen chloride which have a combination of physical and chemical behavior on hydrocarbon flame. In the flame established with the same mole of methane and additive, $CO_2$ addition significantly contributes toward the reduction of flame speed and flame temperature by the physical effect, whereas addition of HCl mainly does by the chemical effect. The impact of HCl addition on the decrease of the radical concentration is about 1.6-1.8 times as large as $CO_2$ addition. Hydrogen chloride addition is higher on the reduction of EINO than $CO_2$ addition because of the chemical effect of HCl.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.189-194
• /
• 1999

The antiwear performance of several organic phosphates ,such as tricrecylphosphate(TCP), tributylphosphate(TBP), diphenylhydrogenphosphate(DPHP) ,dissolved in polyol ester based oils is studied. These organic phosphates are well known for antiwear additive for lubricating oil that produce reacted surface protective film. These antiwear additives can drastically reduce wear with their concentration increasing, because the amount of additive adsorbed on metal sur(ace increases. But in the higher concentration region, the wear is increased by excessive and corrosive reaction of the metal surface with these additives. That is to say, there is an optimum concentration for minimum wear. The optimum concentration was different with the kinds of base oils and additives. Different polyolesters showed different optimum concentrations of the additive. The order of optimum concentration among the polyolesters was different with different phosphates. The order of the optimum concentration is shown that the effect of the concentration of additives on the antiwear performance. It can be explained by the interaction between additives and base oils using the solubility parameter.

• International Journal of Automotive Technology
• /
• v.8 no.4
• /
• pp.413-419
• /
• 2007

Experimental study of additives on the ignition performance of a compression ignition natural gas engine is introduced, followed by results of a simulation of its working mechanism. From the experimental results, it is understood that engine ignition performance can be improved when a certain amount of Di-tertiary-butyl peroxide additive is added. If the mass fraction of Di-tertiary-butyl peroxide additive reaches as high as 14.2%, engine ignition can be realized at ambient temperatures with a glow plug temperature of about $750^{\circ}C$. From the simulation results, we verify that the Di-tertiary-butyl peroxide additive, by cracking its radicals at lower temperature, can accelerate reaction rate. Therefore, the additive is able to improve the ignition performance of natural gas significantly.

• Advances in Computational Design
• /
• v.1 no.1
• /
• pp.27-35
• /
• 2016

The influences of chloride-free components of the cement additive: triethanolamine, triisopropanolamine, sodium hyposulfite and calcium gluconate on the 1d, 3d and 28d compressive strength of cement were investigated by response surface methodology. It found the early strength activators, triethanolamine and sodium hyposulfite could enhance the 1d strength of cement effectively but they did not contribute to the 3d strength enhancement, and further their interaction was able to decrease the 28d strength of cement. Calcium gluconate was not that effective for the strength enhancement on 3 and 28 days when it's simply dosed. However the interaction effect of calcium gluconate with triisopropanolamine could strongly favor the strength enhancement of cement after 3 days. Results indicated it was necessary to focus attention on the potential interactions among the chemical components. And for the concern of four chemicals studied in this paper, it was feasible to formulated a kind of chloride-free cement additive that can be effective for the early strength of cement and its the strength after 3 days.

• Animal cells and systems
• /
• v.16 no.5
• /
• pp.425-430
• /
• 2012

The southwestern Australian frog Crinia georgiana (Anura; Myobatrachidae) inhabits ephemeral pools in which the tadpoles often face desiccation. Under these conditions selection on tadpoles can be severe and can directly affect fitness during the aquatic as well as the terrestrial developmental stages. A quantitative genetic study using a half-sib breeding design was conducted to understand the genetic effects on larval life-history traits. We found no significant additive genetic variance in any of larval traits. Except for hatching period, heritability estimates based on females were high in egg size, larval period, snout-vent length, and weight at metamorphosis, suggesting non-additive genetic effects. These results indicate that any response to selection during hatching and larval periods should be predominately governed by non-additive genetic effects in C. georgiana.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.1
• /
• pp.15-20
• /
• 2004

Through shallow trench isolation (STI) chemical mechanical polishing (CMP) tests, we investigated the dependence of pad surface temperature on the abrasive and additive concentrations in ceria slurry under varying pressure using blanket film wafers. The pad surface temperature after CMP increased with the abrasive concentration and decreased with the additive concentration in slurries for the constant down pressure. A possible mechanism is that the additive adsorbed on the film surfaces during polishing decreases the friction coefficient, hence the pad surface temperature gets lower with increasing the additive concentration. This difference in temperature was more remarkable for the higher concentration of abrasives. In addition, in-situ measurement of spindle motor was carried out during oxide and nitride polishing. The averaged motor current for oxide film was higher than that for nitride film, meaning the higher friction coefficient.