• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제25권3호
• /
• pp.525-536
• /
• 2011

대학수학능력시험에서 자연계열의 수험생들이 선택하게 되는 수리 가형과 과학탐구가 아닌 다른 교과목을 선택하여 응시한 수험생이 이 공계열의 학과로 지원할 수 있는 대학입시과정에서, 교차지원제도는 그 도입 취지와는 다르게 대학 교육현장에서 부작용도 발생하고 있다. 개선 방법의 하나로, 우수한 신입생 유치와 함께 자연계열 성향의 수험생 확보라는 두 개의 큰 목표를 동시에 이루기 위하여 각 대학은 가산점을 다양한 방법으로 활용하고 있다. 이에 서울과학기술대학교 대학수학 교과목 학업성취도 사례 중심으로 가산점 제도의 필요성과 그 효과에 대하여 논의하고자 한다.

• Journal of Multimedia Information System
• /
• 제5권1호
• /
• pp.59-62
• /
• 2018

The delay between input action and visual interface feedback ("Latency") in a touchscreen inking task reduces the user's performance. When the latency is less than 2.38ms, the user cannot perceive the latency in dragging task. This value is difficult to achieve on recent touchscreens and general purpose computers. So, methods of predicting touch points to reduce perceptible latency has been proposed. In general, touch points prediction is not perfect. When using point prediction, feedback of the predicted points is displayed on the screen, after a while, erased when the actual points are displayed. When this task is implemented by software, it causes additional latency to work to erase predicted points feedback. It therefore propose a platform for rendering point prediction feedback without additional latency by the FPGA. This platform transmits input points and HDMI signals rendering feedback of input points to the FPGA. The FPGA draws the feedback of points predicted based on the input points on the HDMI and displays the screen. Since hardware rendering changes the HDMI signal every frame, it does not require erasing work and rendering can be done within an early time regardless of the amount of rendering, so we will reduce the latency.

• 산업경영시스템학회지
• /
• 제34권2호
• /
• pp.1-8
• /
• 2011

This paper proposes a variable sampling interval multivariate $T^2$ control chart with sampling at fixed times, where samples are taken at specified equally spaced fixed time points and additional samples are allowed between these fixed times when indicated by the preceding $T^2$ statistics. At fixed sampling points, the $T^2$ statistics are composed of all quality characteristics and a part of quality characteristics are selected to obtain $T^2$ statistics at additional sampling points. A Markov chain approach is used to evaluate the performance of the proposed chart. Numerical studies for the performance of the proposed chart show that the proposed chart reduces the observations obtained from a process and detects the assignable cause of a process with low correlated quality characteristics quickly.

• Journal of Gastric Cancer
• /
• 제24권2호
• /
• pp.172-184
• /
• 2024

Purpose: The original eCura system was designed to stratify the risk of lymph node metastasis (LNM) after endoscopic resection (ER) in patients with early gastric cancer (EGC). We assessed the effectiveness of a modified eCura system for reflecting the characteristics of undifferentiated-type (UD)-EGC. Materials and Methods: Six hundred thirty-four patients who underwent non-curative ER for UD-EGC and received either additional surgery (radical surgery group; n=270) or no further treatment (no additional treatment group; n=364) from 18 institutions between 2005 and 2015 were retrospectively included in this study. The eCuraU system assigned 1 point each for tumors >20 mm in size, ulceration, positive vertical margin, and submucosal invasion <500 ㎛; 2 points for submucosal invasion ≥500 ㎛; and 3 points for lymphovascular invasion. Results: LNM rates in the radical surgery group were 1.1%, 5.4%, and 13.3% for the low-(0-1 point), intermediate- (2-3 points), and high-risk (4-8 points), respectively (P-fortrend<0.001). The eCuraU system showed a significantly higher probability of identifying patients with LNM as high-risk than the eCura system (66.7% vs. 22.2%; McNemar P<0.001). In the no additional treatment group, overall survival (93.4%, 87.2%, and 67.6% at 5 years) and cancer-specific survival (99.6%, 98.9%, and 92.9% at 5 years) differed significantly among the low-, intermediate-, and high-risk categories, respectively (both P<0.001). In the high-risk category, surgery outperformed no treatment in terms of overall mortality (hazard ratio, 3.26; P=0.015). Conclusions: The eCuraU system stratified the risk of LNM in patients with UD-EGC after ER. It is strongly recommended that high-risk patients undergo additional surgery.

• 핵의학기술
• /
• 제19권2호
• /
• pp.63-67
• /
• 2015

환자의 호흡에 의해 발생되는 인공물의 감소를 위한 다양한 방법들 중 호흡동조 시스템(이하 Q static scan)과 비교하여 CTAC Shift 보정방법, Additional scan(추가 검사방법)을 평가해보고자 한다. 본 연구는 2015년 2월에서 5월까지 본원을 내원한 환자들 중 영상에서 호흡에 의해 인공물이 발생한 환자 10명을 대상으로 진행하였으며 장비는 PET-CT Discovery 710 (GE Healthcare, MI, USA)과 호흡동조 시스템인 Varian사의 RPM system을 사용하였다. 환자는 24시간동안의 운동금지, 12시간동안 커피와 담배 금지, 8시간동안 금식을 한 후 충분한 수분을 섭취하고 도착시 혈관확보를 한 후 혈당 체크를 진행하며 $^{18}F$-FDG를 kg당 5.18 Mbq을 주사하였다. 그 후 1시간동안 안정을 취하고, 배뇨 후 검사를 진행하였다. CT조건은 관전압 120 kVp와 관전류 60 mAs, DFOV는 70 cm, Matrix size는 $192{\times}192$으로 모두 동일하게 진행하였다. 인공물이 발생한 영상을 기준으로 Additional scan, 호흡동조 시스템을 연동한 Q static scan, CTAC Shift 보정방법을 통해 영상화하였다. 각각의 영상에서 인공물의 감소를 비교하였으며, 육안적 평가와 SUVmax의 변화를 측정하였다. 인공물이 발생한 Whole body scan(WBS)을 통해 얻은 영상 대비 CTAC Shift 보정방법을 통해 얻은 영상의 경우 12~56%, Q static scan 영상은 17~54%, Additional scan 영상은 -27~46%의 변화율을 보였다. Blind Test에서는 CTAC Shift 보정영상이 4점으로 가장 높은 점수를 얻었고 Q static scan 영상이 3.5점, Additional scan 영상이 3.4점의 점수를 얻었다. Oneway ANOVA 검정을 통해 기준이 된 WBS scan 영상과 세 가지 Scan방법간에 유의한 차이를 보였으며(p<0.05) 세 가지 Scan방법간에는 유의한 차이를 보이지 않았다(p>0.05). 그러나 Blind test에서는 세 가지 Scan방법간의 유의한 차이를 보였다. Additional scan과 Q static scan은 CTAC Shift 보정 방법보다 시간이 소요되며 환자에게 CT 재촬영에 의한 과피폭이 우려되며 Q static scan은 호흡의 기복이 심하거나 통증으로 인해 호흡 주기가 불규칙한 환자의 경우 적용하기에 어려움이 있다. CTAC Shift 보정 방법의 경우 제한적으로 보정이 가능하며 그 범위 또한 제한적이다. 이를 보완하기 위해 각 병원의 시스템을 적절히 이용하고 각 방법의 장점의 여러 요소들을 발전시킨다면 진단적 가치를 높이기 위한 방법의 하나로써 유용할 것으로 사료된다.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.21-28
• /
• 2009

In the present work, an attempt has been made to construct branching surface from 2-D contours, which are given at different layers and may have branches. If a layer having more than one contour and corresponds to contour at adjacent layers, then it is termed as branching problem and approximated by adding additional points in between the layers. Firstly, the branching problem is converted to single contour case in which there is no branching at any layer and the final branching surface is obtained by skinning. Contours are constructed from the given input points at different layers by energy-based B-Spline approximation. 3-D curves are constructed after adding additional points into the contour points for all the layers having branching problem by using energy-based B-Spline formulation. Final 3-D surface is obtained by skinning 3-D curves and 2-D contours. There are three types of branching problems: (a) One-to-one, (b) One-to-many and (c) Many-to-many. Oneto-one problem has been done by plethora of researchers based on minimizations of twist and curvature and different tiling techniques. One-to-many problem is the one in which at least one plane must have more than one contour and have correspondence with the contour at adjacent layers. Many-to-many problem is stated as m contours at i-th layer and n contours at (i+1)th layer. This problem can be solved by combining one-to-many branching methodology. Branching problem is very important in CAD, medical imaging and geographical information system(GIS).

• 한국태양에너지학회 논문집
• /
• 제39권2호
• /
• pp.1-9
• /
• 2019

In order to increase the power generation efficiency of the photovoltaic system, a new algorithm that can follow the maximum power point of the photovoltaic power generation system having nonlinear output characteristics is proposed. Conventional maximum power point tracking (MPPT) algorithms such as Perturbation and Observation (P&O) and InCond (Increment and Conductance) schemes can not find the global maximum power point at a plurality of pole points in the unmatched state of unbalanced PV modules. However, even if the global maximum power point is found at a plurality of pole points, the global maximum power that can not be the real maximum power by the photovoltaic generation system. In order to solve this problem, a few PV companies propose installing several small PV inverters instead of if big one. However, since this will require additional costs, we herein propose a Multi-MPPT system using individual 3-point MPPT to track true MPPT at a plurality of pole points in the unmatched state of unbalanced PV modules.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.327-336
• /
• 2020

This study presents signal availability of inter-operable global navigation satellite system (multi-GNSS) combined with future Korean Positioning System (KPS), specifically at geosynchronous orbit (GSO). The orbit of KPS, which is currently under conceptual feasibility study, is first introduced, and the grid points for evaluating space service volume (SSV) at GSO are generated. The signal observabilities are evaluated geometrically between those grid points and KPS/GNSS satellites. Then, analyzed are the visibility averaged over time/space and outage time to not access one or four signals. The reduction of maximum outage time induced by KPS are presented with different maximum off-boresight angles depending on L1/E1/B1 and L5/L3/E5a/B2 frequencies. Our numerical analysis shows that the SSV of multi-GNSS combined with KPS provides up to 7 additional signals and could provide continuous observation time (zero outage time) of more than four GNSS or KPS signals for 3.20-14.83% of SSV grid points at GSO. Especially at GSO above North/South America and Atlantic region, the introduction of KPS reduces the outage duration by up to 63 minutes with L1/E1/B1 frequency.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 추계학술발표대회
• /
• pp.168-171
• /
• 2016

In recent years, indoor localization in Wi-Fi environment has been researched for its location determining capability. The fingerprint and RF propagation models has been the main approach in determining indoor positioning. With the use of fingerprint, a low-cost, versatile localization system can be achieved without the use of external hardware. However, only a few research have been made on virtual access points (VAPs) among indoor localization models. In this paper, the idea of indoor localization system using fingerprint with the addition of VAP in Wi-Fi environment is discussed. The idea is to virtually add APs in the existing indoor Wi-Fi system, this would mean additional virtually APs in the network. The experiments of the proposed algorithm shows the positive results when 2VAPs are used compared with only APs. A combination of 3APs and 2VAPs had the lowest average error in all 4 scenarios with 3.99 meters.

• 한국식품영양학회지
• /
• 제32권6호
• /
• pp.730-737
• /
• 2019

The purpose of this study was to derive practical improvement measures for the food traceability system that could improve food reliability and secure food safety. To this, in our survey May-June, 2019, 567 adult males and females were analyzed for recognition and experience of the food traceability system, measures to improve the system, and intention to make additional payments to improve the system. In the case of a food safety accident, 2.54 of 5 points were given on if the food was recalled or not. Approximately 77.4 percent of the respondents had never seen indication of a food traceability system, and approximately 93.8 percent had no access to, or experience with, using the system. Most respondents said that the food traceability system should be applied to items that need to be applied. As the volume of data that is recorded and managed by the government is recognized as high, improvement is needed. Finally, it was analyzed that the company intends to pay an additional 1.34% on average to expand its food traceability system. A more sophisticated cost analysis is needed to apply the improvements proposed to complement the plans that are acceptable to consumers and the industry.