• 대한환경공학회지
• /
• 제27권5호
• /
• pp.468-475
• /
• 2005

휘발성 유기화합물(VOCs)의 제거를 위한 담체충진형 바이오필터법은 운전이 용이하고 처리비용이 낮다는 장점에도 불구하고 낮은 운전성능과 막힘현상등의 문제를 안고 있다. 이에 대한 대안으로 계면활성제로 형성된 거품을 사용해 VOCs의 물질전달율과 분해효율을 향상시킨 미생물반응기(BFR)가 제안되었다. 본 연구는 VOCs 저감기술로서 BFR의 적용가능성을 확인하기 위하여 수행되었다. 우선, BFR에 사용될 계면활성제를 선정하기 위해, 4종류의 계면활성제를 대상으로 회분실험을 수행하였으며, 실험결과 TritonX-100이 미생물의 생분해도에 미치는 영향이 가장 적어 BFR에 적용하기 적합한 계면활성제로 판명되었다. 선정된 계면활성제를 BFR에 첨가하고, 반응기 내에 유입되는 가스의 체류시간과 톨루엔 유입부하량을 변화시키면서 반응기의 운전성능을 평가하였다. 가스체류시간이 0.5분에서 2분으로 증가하면서 반응기의 톨루엔 분해율도 50%에서 80%로 증가하였다. 그러나 톨루엔 유입부하량이 $38\;g/m^3/hr$에서 $454\;g/m^3/hr$으로 증가하면서 톨루엔 분해율은 70%에서 20%로 감소하였다. 본 실험에서는 BFR의 최대분해능은 $108\;g/m^3/hr$로 나타나 기존 담체 충진형 바이오필터에 비해 높았으며, 따라서 BFR 시스템이 기존의 담체를 이용하는 생물학적 VOCs 저감기술에 대한 대안으로서 가능성이 있음을 알 수 있었다. 하지만, 높거나 낮은 가스유속에서 거품이 안정적으로 발생하지 않는 점 등은 여전히 해결해야할 과제로 남아있다.

• Journal of Plant Biotechnology
• /
• 제5권4호
• /
• pp.239-244
• /
• 2003

A protocol has been developed for rapid large scale clonal propagation of an aromatic endangered medicinal plant, Hemidesmus indicus R. Br. with the elimination of the problems such as premature leaf fall and callus formation during caulogenesis and rhizogenesis. Multiple shoots were induced from shoot tip and nodal explants on Murashige and Skoog (MS) medium supplemented with 1 mg/L Benzylaminopurine (BAP) and 0.5 mg/L Napthaleneaceticacid (NAA). Addition of 15 mg/L adenine sulphate to the above medium checked leaf abscission completely, reduced the time required for caulogenesis and restored morphogenetic potential after several subcultures. The in vitro grown propagules were rooted in 1/2 MS medium supplemented with 2 mg/L Indolebutyric acid (IBA) +1 mg/L NAA and sucrose 0.7% (w/v). Addition of charcoal at 100 mg/L to the rooting medium quickened root initiation with a complete check on callus formation. The effect of sucrose concentration on both caulogenesis and rhizogenesis was also studied. The resultant plantlets were acclimatized and grown in fields where ninety eight percent of the rooted shoots survived and grew normally. The estimation of the secondary metabolite content in the shoots of the regenerated plant and the mother plant indicated that the concentration of the three secondary metabolites lupeol, vanillin and rutin was similar.

• 대한화학회지
• /
• 제59권6호
• /
• pp.493-498
• /
• 2015

The reductive amination of cyclohexanone with ammonia over Cu-Cr-a/γ-Al₂O₃ was investigated. It was found that a proper solvent with high solubility of ammonia and 4Å molecular sieves for the elimination of generated water contributed to the formation of cyclohexylamine in the premixing process. In addition, the addition of ammonia in the fixedbed reactor could obviously improve the conversion of cyclohexanone to cyclohexylamine. Finally, reaction conditions including reaction temperature, hydrogen pressure and charging rate of the premix were optimized. Under the optimized conditions, cyclohexylamine was obtained in 83.06% yield.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.3022-3030
• /
• 2011

Since the discovery of the fact that compounds bearing a vinylic fluoride moiety often exhibit remarkable biological activities such as enzyme inhibitors, many synthetic methods for fluorine-substituted vinylic compounds have been developed. The synthesis of selectively fluorinated building blocks, such as arylsubstituted fluoro-alkenes, also has become an area of interest in recent years. Herein we describe a novel and practical method for the synthesis of 1,1-difluoro- and 1-fluoroalkenes starting from easily accessible trifluoroacetophenone derivatives. Various 1,1-difluoro- and 1-fluoroalkenes were prepared by the reaction of the corresponding tosyl hydrazones that were derived from trifluoroacetophenone derivatives by treating with alkyl or aryllithium reagents via addition-elimination and single electron transfer (SET) mechanism.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.577-580
• /
• 2004

Our paper focus on crosstalk noise problem, especially crosstalk glitch that occurs when victim is stable state and aggressor is transitive state. This generated glitch weigh with the functional reliability if the glitch is considerable. In this paper, we use buffer insertion, down sizing, buffer insertion with up-sizing methods concurrently. These methodologies use filtering effects which gates that have bigger noise margin than glitch width eliminates glitch. In addition, we do limited optimization in boundary of node's slack. Therefore, the operated node's changes are for nothing in other node's slack.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.291-295
• /
• 2005

The PEMFC behavior is quite complex and is influenced by several factors, including composition and structure of electrodes and membrane type. Fabrication of MFA is important factor for proton exchange membrane fuel cell. MFA of PEMFC with hot pressing and direct coating method were prepared, and performances were evaluated and compared each other. The effect of MEA preparation methods, hot pressing methods and direct coating methods, on the cell performance was analyzed by impedance spectroscopy and SEM. The performance of PEMFC wi th direct coat ing method was better than wi th hot pressing method because membrane internal resistance and membrane-:-interfacial resistance were reduced by elimination of hot pressing process in MEA fabrication. In addition the micro structure of MEA with direct coating method reveals uniform interface between membrane and catalyst layer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.230-234
• /
• 2005

Fabrication of MEA is important factor for proton exchange membrane fuel cell (PEMFC). MEA of PEMFC with hot pressing and direct coating method were prepared, and performances were evaluated and compared each other. The effect of MEA preparation methods, hot pressing methods and direct coating methods, on the cell performance was analyzed by impedance spectroscopy and SEM. The performance of PEMFC with direct coating method was better than with hot pressing method because membrane internal resistance and membrane-interfacial resistance were reduced by elimination of hot pressing process in MEA fabrication. In addition the micro structure of MEA with direct coating method reveals uniform interface between membrane and catalyst layer.

• 제어로봇시스템학회논문지
• /
• 제7권5호
• /
• pp.393-398
• /
• 2001

This paper presents a new method with time-varying boundary layer and input gain, variated by Fuzzy Logic Control(FLC) by means of the system state in Sliding Mode Control (SMC). In addition to the time-varying boundary layer, the time-varying range of the fuzzy membership function has an effect on not only chattering reduction but also fast response characteristics. On the basis of SMC with time-varying boundary and FLC with time-varying input and output range, a computer simulation for inverted pendulum results in elimination of the chattering phenomenon and fast response.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.259-267
• /
• 2008

Power quality improvement in a three-phase four-wire system is achieved using a new topology of DSTATCOM (distribution static compensator) consisting of a star/delta transformer with a tertiary winding and a three-leg VSC (voltage source converter). This new topology of DSTATCOM is proposed for power factor correction or voltage regulation along with harmonic elimination, load balancing and neutral current compensation. A tertiary winding is introduced in each phase for a delta connected secondary in addition to the star-star windings and this delta connected winding is responsible for neutral current compensation. The dynamic performance of the proposed DSTATCOM system is demonstrated using MATLAB with its Simulink and Power System Blockset (PSB) toolboxes under varying loads. The capacitor supported DC bus of the DSTATCOM is regulated to the reference voltage under varying loads.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.587-591
• /
• 2004

This paper proposes a novel current compensation technique that can eliminate the harmonic currents included in line currents without computation of harmonic current components. A current controller with fast dynamics for an active filter is described. Harmonic currents are directly controlled without the need for sensing and computing the harmonic current of the load current, thus simplifying the control system. Current compensation is done in the time domain, allowing a fast time response. The DC voltage control loop keeps the voltage across the DC capacitor constant. High power factor control by an active filter is described. All control functions are implemented in software using a single-chip microcontroller, thus simplifying the control circuit. Any current-controlled synchronous rectifier can be used as a shunt active filter through only the simple modification of the software and the addition of current sensors. It is shown through experimental results that the proposed controller gives good performance for the shunt active filter.