• The Korean Journal of Physiology
• /
• 제10권2호
• /
• pp.11-16
• /
• 1976

In hold that the pulmonary functions which is important situation that the national physical power, at firstly, from age 10 to age 29 young men and women 1,540 person for the progress of grew up, and them to by each aged viewing transition for pulmonary functions physical examination record is as following; and to measure normal Person with comparison by each others pulmonary functions was gained as the results of follows. 1) Frequency of Breathing: It was same the male and female age at 10 per minute over or less of 20 times, but, at age 16 to 17 was $15{\sim}16$ times, and had to precensed compare constant value. 2) Vital Capacity: At the grew up Pregress term as the body stature, age 10 to 17 or 18, had to showing rapidly increasing, but the after Probably constant. The comparison value in man and women in progress of growth up was about $200{\sim}300ml$, and after growth of progress are about 1,500ml, add in men was presence more highly value. 3) Tidal Volume: At a9e 10 was 365m1, but, it was continuing increasing, an4 at age 20 is about 500m1, and the different in men and women about $20{\sim}30$ times and had precense highly value at men. 4) Breathing holding time: It was presence same at male and femele 10 to 13, from 35 second to $37{\sim}38$ seconds, and had to Presence a slight increasing, but, may has to final of the growth progrees age at 14, it should be presence rapidly increasing and the after probably presence as same value but, than female at male is high record average value of $7{\sim}8$ seconds.

• 한국연초학회지
• /
• 제28권2호
• /
• pp.111-116
• /
• 2006

It is very important to add uniformly casing materials on tobacco for taste and flavor. However, analysis of casing materials was spent much time, effort and money. The object of this study was the development of a rapid method for the determination of glycerine, propylene glycol(PG), sucrose, glucose, fructose and water in the casing materials using the NIR transmittance method. Hundreds of calibration samples, with extended ranges (50%, 75%, 100%, 125%, and 150% of standard addition) in each constituent, were prepared in the casing materials at the various temperatures $(25^{\circ}C\;and\;30^{\circ}C)$. Calibration equation was developed by modified partial least square (MPLS) method using second derivative. The standard error of calibration and $R^2$ between added value and NIR estimated value results were $0.007{\sim}0.034\;and\;0.996{\sim}1.000$ for the casing sample set, respectively. The standard error of prediction and R2 between added value and NIR estimated value results were $0.010{\sim}0.034\;and\;0.997{\sim}1.000$ for the casing sample set, respectively. The analysis result was not different significantly between the NIR and added value. These results show that the NIR measurement system is an effective tool to ensure quality on the casing materials.

• The Korean Journal of Physiology
• /
• 제9권1호
• /
• pp.23-32
• /
• 1975

In order to study the dally metabolism of sodium chloride and of nitrogen, 24-hour urine samples were collected from 1,593 normal Korean females whose ages varied from 2 to 80 years old. The volume, the concentration of chloride and the osmolality of the urine, add the total nitrogen were determined, along with the resting pulse rate and the blood pressure. The daily urine volume was maintained at $1,000{\sim}1,300\;ml/m^2/day$ in all age groups while the chloride concentration and osmolality of the urine samples were approximately 200 mEq/liter and 600 milliosmoles, respectively, in most of age groups. Hence the daily urinary output of sodium chloride was estimated to be approximately $15g/m^2$/day in adult groups. On the other hand, the daily excretion of total nitrogen amouted to approximately $5{\sim}6g/m^2/day$. These findings indicated that the average Korean females live on low-protein and high-salt diets throughout their life. Despite a known correlation between the incidence of hypertension and the high salt intake, none of the subjects employed in this work showed any sign of hypertension.

• 한국실내디자인학회논문집
• /
• 제15권2호
• /
• pp.138-149
• /
• 2006

A museum's collections is fundamental factors to construct important activity of museum performing a role as cultural facility for learning, education and research. Therefore, conservation of collections through appropriate environments is previously established in step of planing a museum. Hereby, the purpose of this study is to set up the classification of collections and suggest a useful guidance of the storage division in a domestic museum. The results of this study are as follows. First, the main factors of deterioration are temperature and relative humidity in a museum storage, so classification of collections should be set up according to the objective standards of these factors. Second, the classification of collections can be performed as follow: the group for nonorganic materials subdivide metal, chinaware, earthenware, and jade stone, the group for organic materials subdivide leather hair paper fabric, bone horn shell mound and wood herbage and the group for composed materials. Third, for storage division of a domestic museum, basically has to consider that it is reasonable to plan $4{\sim}5$ storages in metal, jade stone, chinaware earthenware, and organic materials of $1{\sim}2$ units in case of a serial of history like archaeological, antique museum. And in case of folk relics of modern and contemporary arts are collected, it is reasonable to plan over 5 storages add composed materials to foregoing classification.

• 한국토양비료학회지
• /
• 제49권2호
• /
• pp.200-207
• /
• 2016

To add new groundwater standard, 7 candidate materials (copper, zinc, selenium, manganese, iron, chromium, aluminum) were calculated by CROWN (Chemical Ranking Of groundwater pollutaNts). Copper and zinc were selected as groundwater candidates through the process and monitored total 430 samples for 2 years with 113 groundwater sampling sites. In this study, geological distribution characteristics (igneous rock, metamorphic rock, sedimentary rock) of copper and zinc were evaluated and the geological background levels obtained by a cumulative probability distribution and pre-selection methods were compared. In the results, the highest average concentrations of the copper and zinc were observed both in the igneous rock. The detection concentration ranges of copper and zinc in 430 groundwater samples were $0.002{\sim}0.931mg\;L^{-1}$, and $0.002{\sim}32.293mg\;L^{-1}$, respectively. In addition, detection concentration ranges of copper and zinc were $0.002{\sim}0.931mg\;L^{-1}$, $0.002{\sim}32.293mg\;L^{-1}$ in the igneous rock, $0.002{\sim}0.134mg\;L^{-1}$, $0.004{\sim}7.038mg\;L^{-1}$ in the metamorphic rock and $0.002{\sim}0.008mg\;L^{-1}$, $0.003{\sim}3.948mg\;L^{-1}$ in the sedimentary rock, respectively. As a result of the background concentrations with two methods, zinc concentrations with the pre-selected method are comparatively higher than that of the others with the cumulative distribution.

• 한국군사과학기술학회지
• /
• 제15권3호
• /
• pp.298-305
• /
• 2012

In this paper, we propose an integrated algorithm for scene recognition, which has been a challenging computer vision problem, with application to mobile robot localization. The proposed scene recognition method utilizes SIFT and visual words as local-level features and GIST as a global-level feature. As local-level and global-level features complement each other, it results in improved performance for scene recognition. This improved algorithm is of low computational complexity and robust to image distortions.

• 한국군사과학기술학회지
• /
• 제11권6호
• /
• pp.164-171
• /
• 2008

A modified generalized particle algorithm, MGPA, was suggested to improve the computational efficiency of standard SPH method in numerical analysis of high speed impact behavior. This method uses a numerical failure mechanism than material failure models to describe the target penetration. MGPA algorithm was more effective to describe the impact phenomena and new boundaries produced during the calculation process were well recognized and treated in the target penetration problem of a bullet. When bullet perforation problems were analyzed by this method, MGPA algorithm calculation gives the stable numerical solution and stress oscillation or particle penetration phenomena were not shown. The error range in ballistic velocity limit is less than $2{\sim}13%$ for various target thickness.

• 한국군사과학기술학회지
• /
• 제11권5호
• /
• pp.34-41
• /
• 2008

This paper describes the design of SP3T PIN diode switch which has a 500W high power handling capability in $20{\sim}400MHz$ frequency range. Design factors were investigated and it was confirmed by simulation that the characteristics of insertion loss, VSWR, and isolation met design goal. Also, the capability to handle 500W high power with very fast switching speed of less than $26{\mu}s$ was confirmed and insertion loss of less than 1dB, VSWR of less than 1.4:1, and isolation of higher than 60dB were obtained by experiments.

• 정보와 통신
• /
• 제15권7호
• /
• pp.144-157
• /
• 1998

100Gb/s급 WDM (Wavelength Division Multiplexing) 광전송시스템은 10Gb/s 신호 (STM-64) 를 최대 16채널까지 파장분할다중화하는 광전송시스템으로서 단국형 모드 (TM: Terminal Mode)와 분기결합형 모드(ADM: Add-Drop Mode)를 고려한 통합형 구조로 설계, 구현되었다. 본 시스템은 10Gb/s 광신호를 싣는 각각의 채널파장(채널파장간격: 1.6nm)에 최대 16개(파장영역: $1536.61\sim1560.61nm$)까지 광채널 신호를 결합하여 하나의 광섬유로 전송하는 기능을 갖는다. 또한 광전달망 계층구간의 감시제어 기능과 시스템 운용관리 기능 및 사용자 터미널 접속 기능을 수행하는 감시제어 기능을 갖는다. 본 고에서는 개발중인 100Gb/s급 WDM 광전송시스템의 시스템개요, 하드웨어 구현, 감시제어 구현, 다채널 광전송 실험 등에 관해서 기술한다.

• 비파괴검사학회지
• /
• 제9권2호
• /
• pp.67-72
• /
• 1989

In nuclear power plants, nondestructive examinations(NDE) plays an important role in ensuring the integrity and reliability operation. As the number of plants and operational time increased, manual handling of voluminous data associated with PSI/ISI(preservice/inservice inspection) could result in many errors or mistakes in writing the examination plan or other reports. Several new approaches to process the data have been attempted and DBMS(Data Base Management System) has been well known concept with a faster and more accurate data processing. This paper proposes an application program, called NDTSYS designed with DBMS in micro computer. The program could be used for a tool to add new records to a data base, change existing records, delete records and request reports with the data base. It would be helpful to the user who manage the PSI/ISI data with minimal time and effort.