• 전력전자학회논문지
• /
• 제22권4호
• /
• pp.305-311
• /
• 2017

In this paper, the LLC resonant converter battery charger, using adaptive turn ratio scheme, is proposed to achieve high efficiency and wide range output voltage. The LLC converter high frequency transformer has an adaptively changed turn ratio by the auxiliary control circuitry. As a result, the optimal converter design with a large magnetizing inductance is easily achieved to minimize the conduction and the turn-off losses while providing widely regulated voltage gain capability to properly charge the Li-ion battery. The proposed converter operational principle and the optimal design considerations are illustrated in detail. Finally, several simulation results verify the proposed LLC resonant converter's effectiveness.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.124-132
• /
• 2018

This paper proposes an LLC resonant converter based battery charger which utilizes an adaptive turn ratio scheme to achieve a wide output voltage range and high efficiency. The high frequency transformer of the LLC converter of the proposed strategy has an adaptively changed turn ratio through the auxiliary control circuit. As a result, an optimized converter design with high magnetizing inductance is possible, while minimizing conduction and turn-off losses and providing a regulated voltage gain to properly charge the lithium ion battery. For a step-by-step explanation, operational principle and optimal design considerations of the proposed converter are illustrated in detail. Finally, the effectiveness of the proposed strategy is verified through various experimental results and efficiency analysis based on prototype 300W Li-ion battery charger and battery pack.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(3)
• /
• pp.47-50
• /
• 2000

In this paper, we propose a new destage algorithms, called the Dynamic Adaptive Threshold which determines turn-on and turn-off thresholds dynamically depending on the current write cache occupancy level and the differential rate of the host write requests. For performance evaluation, the proposed algorithm is compared with the wellknown High-Low Water Mark (HLWM) algorithm. Performance tests are fulfilled with our cached RAID 5 simulator. The simulation results show that the proposed algorithm outperforms the HLWM algorithm in terms of response time of host reads and write cache hit ratio under various workloads.

• 한국통신학회논문지
• /
• 제37권4A호
• /
• pp.269-277
• /
• 2012

원하는 신호의 어레이 응답벡터와 조향벡터사이에 불일치가 있다면 적응 어레이는 원하는 신호와 간섭신호를 동시에 감쇠하기 때문에 심한 성능저하를 가져올 수 있다. 본 논문에서는 조향벡터에 도래각 에러뿐만 아니라 랜덤에러가 있을 때 이에 대처하는 강인한 적응 어레이 기법을 제시한다. 제시된 기법에서는 상관행렬로부터 SIS(signal-plus-interference subspace) 부공간을 구한 후, ULA(uniform linear array) 구조를 이용하여 원하는 신호의 방향벡터 영향을 가능한 줄이면서 간섭 부공간을 추출하고 이에 직교하도록 가중벡터를 구하여 조향벡터 에러에 대한 강인성을 얻는다. 제안된 방식은 DCRCB(doubly constrained robust Capon beamformer) 등 기존방식보다 우수한 SINR(signal-to-interference plus noise ratio) 성능을 가짐을 시뮬레이션 결과는 보여준다.

• 한국통신학회논문지
• /
• 제32권8C호
• /
• pp.712-719
• /
• 2007

본 논문에서는 $4{\times}4$ 단위의 하다마드 변환을 이용한 새롭고 효과적인 움직임 예측 알고리즘을 제안한다. 하다마드 변환은 덧셈과 뺄셈으로만 이루어져 있기 때문에 고속 알고리즘에 적합하다는 장점이 있다. 제안하는 알고리즘은 세 단계로 이루어져 있다. 먼저 하다마드 DC(Direct Current) 계수를 이용하여 움직임 추정의 조기종결여부를 블록의 특성에 적응적으로 적용하고 이전 프레임의 움직임 벡터를 이용할지를 결정한 다음, 하다마드 AC(Alternating Current) 계수를 이용하여 영상의 복잡도를 구하여 정합 스캔 순서를 적응적으로 결정한다. 마지막으로 제안하는 알고리즘을 MVFAST와 PMVFAST 알고리즘에 적용했다. 모의 실험 결과 제안하는 알고리즘은 계산 속도와 PSNR(Peak Signal-to-Noise Ratio) 면에서 MVFAST와 PMVFAST 알고리즘에 비해 매우 효율적임을 나타냈다.

• Journal of information and communication convergence engineering
• /
• 제6권3호
• /
• pp.343-347
• /
• 2008

Wakeup schemes that turn off sensors' radio when communication is not necessary have great potential in energy saving. At the start of each beacon interval in the IEEE 802.11 power saving mode specified for DCF, each node periodically wakes up for duration called the ATIM Window. However, in the power saving mechanism specified in IEEE 802.11, all nodes use the same ATIM window size. Since the ATIM window size critically affects throughput and energy consumption, a fixed ATIM window does not perform well in all situations. This paper proposes an adaptive mechanism to dynamically choose an ATIM window size according to network condition. Simulation results show that the proposed scheme outperforms the IEEE 802.11 power saving mechanism in terms of the amount of power consumed and the packet delivery ratio.