• Journal of Welding and Joining
• /
• 제16권6호
• /
• pp.68-76
• /
• 1998

A CCD camera with a laser stripe was applied to realized the automatic weld seam tracking. The 3-dimensional information obtained from the vision system made it possible to generate the weld torch path. The adaptive Hough transformation was used to extract laser stripes an to obtain specific weld points. It takes relatively long time to process image on-line control using the basic control using the basic Hough transformation, but it has a tendency of robustness over the noises such as spatter. For this reason, it was complemented with adaptive Hough transformation to have an on-line processing ability for scanning specific weld points. The dead zone, where the sensing of weld line is impossible, was eliminated by rotating the camera with its rotating axis centered at the weld torch. When weld lines were detected, the camera angle was controlled in order to get the minimum image data for sensing of weld lines. Consequently, the image processing time was reduced.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.84-91
• /
• 2004

A CCD camera with a laser stripe was applied to realize the automatic weld seam tracking in GMAW. It takes relatively long time to process image on-line control using the basic Hough transformation, but it has a tendency of robustness over the noises such as spatter and arc tight. For this reason, it was complemented with adaptive Hough transformation to have an on-line processing ability for scanning specific weld points. The adaptive Hough transformation was used to extract laser stripes and to obtain specific weld points. The 3-dimensional information obtained from the vision system made it possible to generate the weld torch path and to obtain the information such as width and depth of weld line. In this study, a neural network based on the generalized delta rule algorithm was adapted for the process control of GMA, such as welding speed, arc voltage and wire feeding speed.

• Journal of Welding and Joining
• /
• 제19권6호
• /
• pp.600-607
• /
• 2001

A CCD camera with a laser stripe was applied to realize the automatic weld seam tracking in GMAW. It takes relatively long time to process image on-line control using the basic Hough transformation, but it has a tendency of robustness over the noises such as spatter and arc light. For this reason. it was complemented with adaptive Hough transformation to have an on-line processing ability for scanning specific weld points. The adaptive Hough transformation was used to extract laser stripes and to obtain specific weld points. The 3-dimensional information obtained from the vision system made it possible to generate the weld torch path and to obtain the information such as width and depth of weld line. We controled the wire feeding rate using informations of weld line.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1105-1109
• /
• 1995

A CCD-camera, which is structured with vision system, was used to realize automatic seam-tracking system and 3-D information which is needed to generate torch path, was obtained by using laser-slip beam. To extract laser strip and obtain welding-specific point, Adaptive Hough-transformation was used. Although the basic Hough transformation takes too much time to process image on line, it has a tendency to be robust to the noises as like spatter. For that reson, it was complemented with Adaptive Hough transformation to have an on-line processing ability for scanning a welding-specific point. the dead zone,where the sensing of weld line is impossible, is eliminated by rotating the camera with its rotating axis centered at welding torch. The camera angle is controlled so as to get the minimum image data for the sensing of weld line, hence the image processing time is reduced. The fuzzy controller is adapted to control the camera angle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.558-561
• /
• 2002

A CCD camera with a laser strip was applied to realize the automation of welding Process in GMAW. It takes relatively long time to process image on-line control using the basic Hough transformation, but it has a tendency of robustness over the noise such spatter and arc light. The adaptive Hough transformation was used to extract the laser stripe and to obtain specific weld points In this study, a neural network based on the generalized delta rule algorithm was adapted for the process control of GMA, such as welding speed, arc voltage and wire feeding speed.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.147-153
• /
• 2020

기존의 차선 검출 방법들은 곡률과 날씨 변화가 큰 도로 환경에서 검출률이 낮다. 확률적 허프 변환을 이용한 방법은 에지와 직선의 각도를 이용해서 차선을 검출함으로 곡선과 악천후일 때 검출률이 낮다. 슬라이딩 윈도우 방법은 윈도우로 이미지를 분할해서 검출하기 때문에 곡선 형태의 차선도 검출하지만 어파인 변환을 사용하기 때문에 도로의 경사율에 영향을 받는다. 본 논문에서는 다양한 외부 환경에서도 차선을 강인하게 검출하고 장애물을 회피하기 위한 딥러닝 기반의 주행 보조 시스템을 제안한다. VGG-16기반의 SegNet으로 입력 영상을 의미론적으로 분할해서 차선을 검출한다. 검출한 차선과의 이격거리를 계산하고 안전범위를 산출해서 차량이 차선의 중앙을 주행하도록 제어한다. 또한, 전방의 미확인 물체와 충돌이 예상되면 운전자에게 경보를 주고 Adaptive-MPC로 차량을 제어해서 충돌을 회피하는 알고리즘도 제안한다. CARLA로 시뮬레이션한 결과 제안한 알고리즘은 곡률이 큰 차선과 다양한 환경에서도 강인하게 차선을 검출하고 전방의 안전범위를 계산하여 충돌을 회피하는 것을 볼 수 있다.