• Journal of Mechanical Science and Technology
• /
• v.18 no.4
• /
• pp.535-549
• /
• 2004

This paper proposes a sliding mode controller with fuzzy adaptive perturbation compensator(FAPC) to get a good control performance and reduce the chatter, The proposed algorithm can reduce the chattering because the proposed fuzzy adaptive perturbation compensator compensates the perturbation terms. The compensator computes the control input for compensating unmodeled dynamic terms and disturbance by using the observer-based fuzzy adaptive network(FAN) The weighting parameters of the compensate. are updated by on-line adaptive scheme in order to minimize the estimation error and the estimation velocity error of each actuator. Therefore, the combination of sliding mode control and fuzzy adaptive network gives the robust and intelligent routine to get a good control performance. To evaluate the control performance of the proposed approach, tracking control is experimentally carried out for the hydraulic motion platform which consists of a 6-DOF parallel manipulator.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.9
• /
• pp.1456-1467
• /
• 1990

The time domain adaptive noise canceller (time domain ANC) with the adaptive compensator and its algorithm, so called compensated least mean squares(CLMS) algorithm, had been introduced to improve the performance of ANC[1]. In this paper the time domain ANC with the adaptive compensator is transformed into the frequency domain ANC with the adaptive ocmpensator. An compensated frequency-domain least mean squares(CFLMS) algorithm that can adapt the proposed frequency domain ANC is presented.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.427-430
• /
• 2003

This paper proposes a modified generalized side-lobe canceller with a summed adaptive filter and an adaptive compensator. A summed adaptive filter reduces computational loads and the adaptive compensator minimizes the misadjustment of the adaptive filter coefficients . Computer simulations explain the performance improvement of the proposed method and the conventional generalized side-lobe canceller.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.99-102
• /
• 2001

The brief proposes to reduce the misadjustment of the adaptive filter coefficients that trace the interference signal in the sidelobe. The proposed sidelobe canceller that has the form of Griffiths-Jim sidelobe canceller with an adaptive compensator that reduces the misadjustment. The proposed sidelobe canceller updates the filter coefficients by the error Signet of the adaptive compensator instead of the output signal. This brief shows the Improvement of the performance by comparing the computer simulation of the output signal of the Griffiths-Jim sidelobe canceller to the output signal of the proposed sidelobe canceller.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.6
• /
• pp.77-83
• /
• 2003

This paper deals with a position control problem of a hydraulic proportional position control system using a nonlinear friction compensation control. As nonlinear friction, stiction and coulomb friction forces are considered and modeled as deadzone and external disturbance respectively. In order to compensate this nonlinearities, we designed the controller which is the adaptive friction compensator using discrete time Model Reference Adaptive Control method in this paper. Digital Signal Processing board is employed for data acquisition and manipulation. The experimental results show that response is slow and steady-state error cannot be compensated properly without friction compensation but this compensator is effective to obtain fast response and good steady-state response.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.794-803
• /
• 2016

This paper propose a sensorless control system of IPMSM with a adaptive back-EMF estimator and improved instantaneous reactive power compensator. A saliency-based back-EMF is estimated by using the adaptive algorithm. The estimated back-EMF is inputted to the phase locked loop(PLL) and the improved instantaneous reactive power(IRP) compensator for estimating the position/speed of the rotor and compensating the error components between the estimated and the actual position, respectively. The stability of the proposed system is achieved through Popov's hyper stability criteria. The validity of proposed algorithm is verified by the simulations and experiments.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3E
• /
• pp.119-125
• /
• 2002

In the conventional generalized side-lobe canceller (GSC), the output is an estimated error signal that causes the adaptive filter weights do not converge to the optimal value. This paper presents a new side-lobe canceller with adaptive compensator th it reduces the misadjustment of the adaptive filter coefficients for the structural problem in the GSC. The adaptive compensator separates the output signal from the estimated error. The newly estimated error signal converges to the zero while the output signal tracks the target signal. This paper shows improvement of the performance by comparing the computer simulation of the output signal of GSC with the output signal of the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.47-50
• /
• 1995

This paper concerns an adaptive control scheme which is an extension of the simplified adaptive control. Originally, the SAC approach was developed based on the command generator tracker (CGT) theory for perfect model tracking. An attractive point of the SAC is that a control input can be synthesized without any prior knowledge about plant structure. However, a feedforward dynamic compensator of the CGT is removed from the basic structure of the SAC. This deletion of the compensator makes perfect model tracking difficult against even a step input. In this paper, an adaptive control system is redesigned to achieve perfect model tracking for as long as possible by reviving the dynamic compensator of the CGT. The proposed method is applied to slewing control of a flexible space structure and compared to the SAC responses.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.742-753
• /
• 2014

In this paper, a new continuously and linearly controlled capacitive static VAR compensator is proposed for the automatic power factor correction of inductive single phase loads in 220V 50Hz power system networks. The compensator is constructed of a harmonic-suppressed TCR equipped with a new adaptive current controller. The harmonic-suppressed TCR is a new configuration that includes a thyristor controlled reactor (TCR) shunted by a passive third harmonic filter. In addition, the parallel configuration is connected to an AC source via a series first harmonic filter. The harmonic-suppressed TCR is designed so that negligible harmonic current components are injected into the AC source. The compensator is equipped with a new adaptive closed loop current controller, which responds linearly to reactive current demands. The no load operating losses of this compensator are negligible when compared to its capacitive reactive current rating. The proposed system is validated on PSpice which is very close in terms of performance to real hardware.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.9
• /
• pp.685-690
• /
• 1987

Adaptive design of IIR digiral filters using equation error method has been studied. In this paper, a design technique of IIR digital filters using output error method with adaptive compensator is presented. In computer simulation results, it is shown that flat response characteristic in pass-band, below-40[dB] attenuation characteristic in stop-band, sharf cut-off characteristic in transition-band, and phase characteristic is linearin pass-band.