• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.984-998
• /
• 1999

최근 개인 휴대 통신에 대한 관심도가 증가하면서 B-ISDN (Broadband Integrated Services Digital Network)과 같은 기존의 유선 망에서 제공하던 다양한 멀티미디어 응용 지원을 무선 망으로 확장시키기 위한 연구가 활발히 진행되고 있다. 그러나 기존의 유선 망에서는 멀티미디어 응용 지원을 위해 QoS (Quality of Service) Provisioning에 관한 많은 연구가 되어 있으나 무선 망에서는 이동성과 무선 전파의 열악한 전송으로 인해 새로운 QoS Provisioning 방법에 관한 연구가 필수적이다. 본 논문에서는 이러한 무선 망의 특수성으로 인해 발생할 수 있는 서비스의 질 저하와 강제 종료를 줄임으로써 지속적인 QoS를 보장해 주고 한정된 무선 자원을 효율적으로 사용하며 처리에 의한 오버헤드를 줄이기 위하여 다음과 같은 세 가지 방법을 제안하였다. 첫째, 핸드오프 강제 종료율을 줄이기 위하여 대역폭 예약 방법을 사용하되 특정 셀의 트래픽 특성에 맞게 또한 시간대에 따른 트래픽 특성에 따라 예약 대역폭의 양을 조절하는 적응적 대역폭 예약 방법이다. 둘째, 많은 경우 각 셀의 트랙픽 변화는 일정한 주기로 변화한다는 특성에 따라 과거의 트래픽 정보를 이용하는 예측 기반의 대역폭 예약 방법이다. 마지막으로 호의 종류, 트래픽 특성, 단말기의 이동 속도에 따라 다른 우선 순위에 의해 호 수락 제어를 수행하는 우선 순위 기반의 호 수락 제어를 제안하였다. 시뮬레이션을 통하여 기존에 제안된 방법과 성능 비교하여, 요구되는 수준의 QoS 보장과 효율적인 자원의 사용, 요구되는 처리비용의 최소화를 통해 전체 시스템의 성능 향상을 입증하였다.Abstract As interest in wireless hand-held terminals and in personal communications services increases recently, there have been broad studies on the ways to support multimedia applications provided in wired networks such as B-ISDN (Broadband Integrated Services Digital Network) in wireless networks. However, since many studies have focused on Quality of Service (QoS) Provisioning in wired networks to provide multimedia applications, new methods of QoS Provisioning are needed in wireless networks to resolve the problem of wireless channel fading and the difficulty of mobility occurred in wireless networks. This paper proposes three schemes of QoS Provisioning in wireless networks which will make continuous QoS guarantee and efficient use of limited wireless resources possible. The first scheme reserves bandwidth in proportion to the amount of real-time traffic in the neighbor cells to decrease the handoff dropping rate of delay sensitive real-time connections, adapting reserved bandwidth for efficient resource utilization. The second scheme is predictive bandwidth reservation scheme that utilizes the past handoff information. It can decrease overheads required to adapt bandwidth reservation. The last scheme is priority-based call admission control prioritizing traffic type (real-time traffic/ non-real-time traffic), connection type (new connection /handoff connection), and mobile terminal speed (fast mobile/slow mobile). Simulation results show that the proposed QoS Provisioning schemes improve the total system performance by achieving three goals - required QoS guarantee, higher bandwidth utilization and less overhead.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.128-138
• /
• 2010

In this paper, we propose a new bit assignment scheme for Wyner-Ziv video coding. Distributed video coding (DVC) is a new video coding paradigm which enables greatly low complexity encoding because it does not have any motion prediction module at encoder. Therefore, it is very well suited for many applications such as video communication, video surveillance, extremely low power consumption video coding, and other portable applications. Theoretically, the Wyner-Ziv video coding is proved to achieve the same rate-distortion (RD) performance comparable to that of the joint video coding. However, its RD performance has much gap compared to MC-DCT-based video coding such as H.264/AVC. Moreover, Transform Domain Wyner-Ziv (TDWZ) video coding which is a kind of DVC with transform module has difficulty of exact bit assignment because the entire image is treated as a same message. In this paper, we propose a feasible bit assignment algorithm using adaptive quantization matrix selection for the TDWZ video coding. The proposed method can calculate suitable bit amount for each region using the local characteristics of image. Simulation results show that the proposed method can enhance coding performance.

• Journal of KIISE:Information Networking
• /
• v.30 no.5
• /
• pp.631-640
• /
• 2003

Because of multi-hop wireless communication, P2P applications in ad hoc networks suffer poor performance. We Propose neighbor caching strategy to overcome this shortcoming and show it is more efficient than self caching that nodes store data in theirs own cache individually. A node can extend its caching storage instantaneously with neighbor caching by borrowing the storage from idle neighbors, so overcome multi-hop wireless communications with data source long distance away from itself. We also present the ranking based prediction that selects the most appropriate neighbor which data can be stored in. The node that uses the ranking based prediction can select the neighbor that has high possibility to keep data for a long time and avoid caching the low ranked data. Therefore the ranking based prediction improves the throughput of neighbor caching. In the simulation results, we observe that neighbor caching has better performance, as large as network size, as long as idle time, and as small as cache size. We also show the ranking based prediction is an adaptive algorithm that adjusts times of data movement into the neighbor, so makes neighbor caching flexible according to the idleness of nodes

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.112-118
• /
• 2009

Skin color segmentation techniques have been widely utilized for face/hand detection and tracking in many applications such as a diagnosis system using facial information, human-robot interaction, an image retrieval system. In case of a video image, it is common that the skin color model for a target is updated every frame for the robust target tracking against illumination change. As for a single image, however, most of studies employ a fixed skin color model which may result in low detection rate or high false positive errors. In this paper, we propose a novel method for effective skin color segmentation in a single image, which modifies the conditions for skin color segmentation iteratively by the image feedback of segmented skin color region in a given image.

• Journal of Computing Science and Engineering
• /
• v.4 no.1
• /
• pp.80-95
• /
• 2010

In order to truly integrate e-Learning system into regular curriculum at a university, mobile access to Learning Management Systems has to be enabled. Mobile devices have the potential to be integrated into the classroom, because they contain unique characteristics such as portability, social interactivity, context sensitivity, connectivity and individuality. Adoption of Learning Management Systems by students is still on the low rate, mostly because of poor usability of existing e-Learning systems. Our initial research has confirmed this hypothesis. Usability issue is rising to the higher level on the mobile platform, because of the mobile devices' limited screen size, input interfaces and bandwidth, and also because of the context of use. Our second hypothesis was that it is wrong to consider a mobile device as a surrogate for desktop or laptop personal computer (PC). By just adopting the existing Learning Management System on mobile devices with adaptive technologies such as Google proxy, we do not acquire the satisfactory results. Usability can prove to be even lower compared to desktop application. One possible solution to the problem could be development of rich client applications for today's mobile devices that would raise the usability to a higher level. We developed a PocketPC prototype application by using user-centered design principles, which we presented as a third alternative in usability research conducted among university students. Results gathered in such a way have confirmed that development of e-Learning system, in order to be widely accepted by students, needs to have the user(student) in the center of development process.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.5
• /
• pp.310-316
• /
• 2013

This paper reports a sinusoidal $180^{\circ}$ drive for a permanent magnet (PM) brushless motor employing automatic angle compensator to suppress the driving loss during the wide-range load operation. The proposed drive of the sinusoidal $180^{\circ}$ PM Brushless motor reduced the amplitude of the 3-phase current by compensating for the lead-angle of the fundamental waves of the 3-phase PWM signal. The conventional lead-angle method was implemented using the fixed angle or memorized table, whereas the proposed method was automatically compensated by calculating the angle of the current and voltage signal. The algorithm of the proposed method was verified in a 30 W PM brushless motor system using a PSIM simulator. The efficiency of the conventional method was decreased 90 % to 60 %, whereas that of proposed method maintained approximately 85 % when the load shift was 0 to $0.02N{\cdot}m$. Using an FPGA prototype, the proposed method was evaluated experimentally in a 30 W PM brushless motor system. The proposed method maintained the minimum phase RMS current and 79 % of the motor efficiency under 0 to $0.09N{\cdot}m$ load conditions. The proposed PM brushless motor driving method is suitable for a variety of applications with a wide range of load conditions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.9-18
• /
• 2015

In recent years, the number of applications embedded in the various devices such as a smart phone is getting larger. Due to the frequent changes of states in the execution environment, various malfunctions may occur. In order to handle the issue, this paper suggests an approach to detecting method-level failures in the legacy software systems. We can determine if the software executes the abnormal behavior based on the behavior model. However, when we apply the context-sensitive behavior model to the method-level, several problems happen such as false alarms and monitoring overhead. To tackle those issues, we propose CIBFD (Context-Insensitive Behavior Model-based Failure Detection) method. Through the case studies, we compare CIBFD method with the existing method. In addition, we analyze the effectiveness of the method for each application domains.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.34-41
• /
• 2017

Wireless mesh networks contain multi-hop routing protocols between wireless nodes and are connected to the Internet through a gateway. These networks perform a role as a backbone and are scalable for main applications. We propose the design of QoS supporting mechanisms for wireless mesh networks using software defined networking. Our proposed scheme is cost-effective and features adaptive QoS mechanisms for wireless router's resource constraints. The QoS mechanisms use software defined networking technology with Openflow protocol based on diffserv and intserv models with MPLS mechanism and RSVP respectively. A performance evaluation model is suggested to verify the validity of the proposed scheme using several QoSmetrics of the wireless mesh networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1594-1617
• /
• 2018

In this paper, we consider a spectrum access scenario which consists of two groups of users, namely Primary Users (PUs) and Secondary Users (SUs) in Cooperative Cognitive Radio Networks (CCRNs). SUs cooperatively relay PUs messages based on Amplify-and-Forward (AF) and Decode-and-Forward (DF) cooperative techniques, in exchange for accessing some of the spectrum for their secondary communications. From the literatures, we found that the Conventional Distributed Algorithm (CDA) and Pragmatic Distributed Algorithm (PDA) aim to maximize the PU sum-rate resulting in a lower sum-rate for the SU. In this contribution, we have investigated a suit of distributed matching algorithms. More specifically, we investigated SU-based CDA (CDA-SU) and SU-based PDA (PDA-SU) that maximize the SU sum-rate. We have also proposed the All User-based PDA (PDA-ALL), for maximizing the sum-rates of both PU and SU groups. A comparative study of CDA, PDA, CDA-SU, PDA-SU and PDA-ALL is conducted, and the strength of each scheme is highlighted. Different schemes may be suitable for different applications. All schemes are investigated under the idealistic scenario involving perfect coding and perfect modulation, as well as under practical scenario involving actual coding and actual modulation. Explicitly, our practical scenario considers the adaptive coded modulation based DF schemes for transmission flexibility and efficiency. More specifically, we have considered the Self-Concatenated Convolutional Code (SECCC), which exhibits low complexity, since it invokes only a single encoder and a single decoder. Furthermore, puncturing has been employed for enhancing the bandwidth efficiency of SECCC. As another enhancement, physical layer security has been applied to our system by introducing a unique Advanced Encryption Standard (AES) based puncturing to our SECCC scheme.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.40-47
• /
• 2015

This paper discusses QoS enhancement in the Best-effort services of the service plan provided by MPEG Media Transport (MMT) systems for video streaming applications. Among MMT services, i.e. per-flow, per-class, and best-effort services, the server does not provide guaranteed bandwidth for the best-effort service only. Therefore, in the best-effort services, a bandwidth access priority is defined for various services, where the lowest priority is assigned to the low-level video services. To alleviate the issue of bandwidth limitation in the best-effort services, this paper investigates transmission of low-resolution video with low bitrate and up-sampling. Our experimental results prove the superiority of the proposed method in terms of delivered video quality.