• International Journal of Contents
• /
• v.11 no.3
• /
• pp.7-13
• /
• 2015

One of the biggest problems of skeletonization is the occurrence of distortions at the junction point of the final binary image. At the junction area, a single point usually becomes a small stroke, and the corresponding trajectory task, as well as the OCR, consequently becomes more complicated. We therefore propose an adaptive post-processing method that uses an adaptive threshold technique to correct the distortions. Our proposed method transforms the distorted segments into a single point so that they are as similar to the original image as possible, and this improves the static handwriting images after the skeletonization process. Further, we attained promising results regarding the usage of the enhanced skeletonized images in other applications, thereby proving the expediency and efficiency of the proposed method.

• Journal of Biomedical Engineering Research
• /
• v.27 no.1
• /
• pp.6-13
• /
• 2006

Ultrasound visualization is a typical diagnosis method to examine organs, soft tissues and fetus data. It is difficult to visualize ultrasound data because the quality of the data might be degraded by artifact and speckle noise, and gathered with non-linear sampling. Rendering speed is too slow since we can not use additional data structures or procedures in rendering stage. In this paper, we use several visualization methods for fast rendering of ultrasound data. First method, denoted as adaptive ray sampling, is to reduce the number of samples by adjusting sampling interval in empty space. Secondly, we use early ray termination scheme with sufficiently wide sampling interval and low threshold value of opacity during color compositing. Lastly, we use bilinear interpolation instead of trilinear interpolation for sampling in transparent region. We conclude that our method reduces the rendering time without loss of image quality in comparison to the conventional methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1229-1234
• /
• 2012

In this paper, we analyze the problems that the DDS middleware, which is a standard data-centric communication interface, uses the fixed packet transmission method by the pre-defined protocol for exchanging data packets. The packet transmission method selected in a fixed manner cannot handle appropriately the increasing of resource overhead in an environment where the load of the DDS network changes dynamically. If the load on the node and network exceeds the threshold, the performance of the packet transmission may be degraded rapidly. This results in a failure of ensuring the real-time characteristic of DDS middleware. To solve this problem, we propose the scheme of the adaptive packet transmission for adjusting the transmission method in real-time based on the overhead on the DDS network.

• Journal of Korea Multimedia Society
• /
• v.13 no.11
• /
• pp.1610-1620
• /
• 2010

This paper proposes a motion-adaptive 3-D deinterlacing algorithm based on an adaptive-thresholded motion detection and an interpolation method using binary patterns to compensate motion missing and false motion errors. For efficient motion detection, we adaptively decided a threshold value according to the complexity of image. Many edge-based interpolation algorithms have been proposed to improve the subjective quality. Recently, to efficiently interpolate low angle edge and line, a method using predefined binary patterns has been proposed. In this paper, we propose an improved method by modifying the binary patterns. Simulation results have shown that the proposed method provides better performance than the existing methods.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.441-447
• /
• 2003

Recently there is a growing Interest In mobile cellula r network providing multimedia service. However, the link bandwidth of mobile cellular network is not sufficient enough to provide satisfactory services to use rs. To overcome this problem, an adaptive framework has been proposed in this study, we propose a new method of estimating DPR(degradation period ratio) in an adaptive multimedia network where the bandwidth of ongoing call can be dynamically adjusted during its lifetime. DPR is a QoS(quality of service) parameter which represents the ratio of allocated bandwidth below a pre-defined target to the whole service time of a call. We improve estimation method of DPR using DTMC(discrete time Markov chain) model. We also calculate mean degradation period and degradation probability more precisely than in existing studies. Under Threshold CAC(call admission control) algorithm, we present analytically how to guarantee QoS to users and illustrate the method by numerical examples. The proposed method is expected to be used as one of CAC schemes in guaranteeing predefined QoS level of DPR

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.49-59
• /
• 2009

In this paper a watermarking algorithm is proposed to optimize the capacity of the digital watermark insertion in an experimental threshold using the characteristics of human visual system(HVS), adaptive scale factors, and weight functions based on discrete wavelet transform. After the original image is decomposed by a 3-level discrete wavelet transform, the watermarks for capacity optimization are inserted into all subbands except the baseband, by applying the important coefficients from the experimental threshold in the wavelet region. The adaptive scale factors and weight functions based on HVS are considered for the capacity optimization of the digital watermark insertion in order to enhance the robustness and invisibility. The watermarks are consisted of gaussian random sequences and detected by correlation. The experimental results showed that this algorithm can preserve a fine image quality against various attacks such as the JPEG lossy compression, noise addition, cropping, blurring, sharpening, linear and non-linear filtering, etc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1587-1595
• /
• 2016

P wave is cardiac parameters that represent the electrical and physiological characteristics, it is very important to diagnose atrial arrhythmia. However, It is very difficult to detect because of the small size compared to R wave and the various morphology. Several methods for detecting P wave has been proposed, such as frequency analysis and non-linear approach. However, in the case of conduction abnormality such as AV block or atrial arrhythmia, detection accuracy is at the lower level. We propose P wave detection algorithm through adaptive threshold and QRS peak variability. For this purpose, we detected Q, R, S wave from noise-free ECG signal through the preprocessing method. And then we classified three pattern of P wave by peak variability and detected adaptive window and threshold. The performance of P wave detection is evaluated by using 48 record of MIT-BIH arrhythmia database. The achieved scores indicate the average detection rate of 92.60%.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.622-626
• /
• 2005

Voxel Coloring is one of the well known methods to reconstruct three dimensional shape from calibrated two dimensional multiple-view images. This paper proposes an advanced Voxel Coloring to complement drawbacks of previous color consistency tests. We propose an adaptive threshold using double threshold and an weight component to test color consistency. From the reconstruction experiment, we have verified that our proposed method outperforms the previous one.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.17-22
• /
• 2016

For the self-adaptive equalization of higher-order QAM systems, this paper proposes a new soft decision-directed (SDD) algorithm that opens the eye patterns quickly as well as significantly reducing the error level in the steady-state when it is applied to the initial equalization stage with completely closed eye patterns. The proposed method for M-QAM application minimized the computational complexity of the existing SDD by the symbol estimated based on the two symbols closest to the observation, and greatly simplified the soft decision independently of the QAM order. Furthermore, in the symbol estimating it increased the reliability of the estimates by applying the superior properties of the sigmoid function and avoiding the erroneous estimation of the threshold function. In addition, the initialization performance was improved when an error is generated to update the equalizer, weighting the symbol decision by the threshold function to the error, resulting in an extension of the range of error fluctuations. As a result, the proposed method improves remarkably the computational complexity and the properties of initialization and convergence of the traditional SDD. Through simulations for 64-QAM and 256-QAM under multipath channel conditions with additive noise, the usefulness of the proposed methods was confirmed by comparing the performance of the proposed 2-SDD and two forms of weighted 2-SDD with CMA.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.39-48
• /
• 2012

Filtering process that separates ground and non-ground points from LIDAR data is important in order to create the digital elevation model (DEM) or extract objects on the ground. The purpose of this research is to select the most effective filtering algorithm through qualitative and quantitative analysis for the existing filtering method used to extract ground points from LIDAR data. For this, four filtering methods including Adaptive TIN(ATIN), Perspective Center-based filtering method(PC), Elevation Threshold with Expand Window(ETEW) and Progressive Morphology(PM) were applied to mountain area, urban area and the area where building and mountains exist together. Then the characteristics for each method were analyzed. For the qualitative comparison of four filtering methods used for the research, visual method was applied after creating shaded relief image. For the quantitative comparison, an absolute comparison was conducted by using control points observed by GPS and a relative comparison was conducted by the digital elevation model of the National Geographic Information Institute. Through the filtering experiment of the LIDAR data, the Adaptive TIN algorithm extracted the ground points in mountain area and urban area most effectively. In the area where buildings and mountains coexist, progressive morphology algorithm generated the best result. In addition, as a result of qualitative and quantitative comparisons, the applicable filtering algorithm regardless of topographic characteristics appeared to be ATIN algorithm.