• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.147-151
• /
• 2014

With the advent of tiny and inexpensive computer systems like Raspberry Pi, it has become possible to construct an experimental environment of MANETs (Mobile Ad hoc Networks) at a relatively low cost. In this paper, we implement a node of MANETs with a Raspberry Pi equipped with two 802.11 wireless LAN cards and dynamic routing software running on it. In an outdoor MANETs environment with moving mobile nodes automatically rebuilding broken routes, we conducted a real-time video streaming experiment over the MANET. The video stream is transmitted from a node with a video camera installed on it to another node through the route established dynamically. Each node is equipped with a display device, with which the current status of the node can be checked out. We also implemented software that automatically collects data stored in each node and analyzes the performance of the MANETs. Through this experiment, we could evaluate the performance of realistic video streaming service in a MANETs environment.

• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.627-634
• /
• 2006

Overlay network eliminates the need to change the application-layer tree when the underlying network changes and enables the overlay network to survive in environments where nonmember nodes do not support multicast functionality. An overlay protocol monitors group dynamics, while underlying unicast protocols track network dynamics, resulting in more stable protocol operation and low control overhead even in a highly dynamic environment. But, if overlay multicast protocols does not know the location information of node, this makes it very difficult to build an efficient multicasting tree. So, we propose a Hierarchical Overlay Multicast Architecture (HOMA) with the location information. Because proposed architecture makes static region-based dynamic group by multicast members, it is 2-tired overlay multicasts of application layer that higher layer forms overlay multicast network between members that represent group, and support multicast between multicast members belonging to region at lower layer. This use GPS, take advantage of geographical region, and realizes a region-sensitive higher layer overlay multicast tree which is impervious to the movements of nodes. The simulation results show that our approach solves the efficiency problem effectively.

• Journal of KIISE:Information Networking
• /
• v.35 no.6
• /
• pp.521-528
• /
• 2008

Such conventional maritime communication technologies as radio have short some comings in their transmission quality. It can be overcome by wireless channels provided by satellites such as INMARSAT, which nevertheless suffer from the high costs. In this paper, we propose a novel technology resolving the above problems, featuring in the establishment of maritime communication networks with multi-hop structures. The inter vessel and ship-to- shore networks previously modeled after MANET are remodeled by SANET (Ship Ad Hoc Networks) in the present work. Fan-shaped Search Zone Routing (FSR) protocol also is presented, which utilizes not only static geographical information including the locations of ports and the navigations of courses but also the unique characteristics of ships in terms of mobile nodes. The FSR finds the fan-shaped search zone on which the shortest path is located. The performance of LAR protocol is compared with that of FSR in several ways. First, FSR does not make use of a type of control packets as beaconing data, resulting in a full utilization of the bandwidth of the wireless channels. Second, the delivery rate by the FSR is 100% for the fan-shaped search zone includes at least one route between source and destination nodes on its border line, where as that of LAR has been turned out to be 64%. Third, the optimality of routes searched by the FSR is on a 97% level. Of all, the FSR shows a better performance than LAR by about 50%.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.59-68
• /
• 2004

Thanks to the development of microelectromechanical systems(MEMS), wireless communication technology and microsensor technology, it was Possible to manufacture a very small and low costdata acquisition node with sensing function, processing function, wireless communication function and battery. Thus sensor networks begin to be prevailed. The sensor network is a spontaneous system which sets up automatically routing paths and transmits asignificant data to the destination. Sensor nodes requires low-power operation because most of them use a battery as operating power. Sensor nodes transmit a sensing data to the destination. Moreover, they play a router. In fact, because the later consumes more energy than the former, the low-power routing is very important. Sensor networks don't have a routing standard unlike general wireless Ad-hoc networks. So This paper proposes a low-power routing method for anting to sensor networks. It is based on AODV and adapts a method to drop probably RREQ depending on remaining power. We examined it through simulations. From simulation results, we could confirm to reduce power consumption about $10-20\%$ and distribute equally power consumption among nodes.

• Journal of KIISE:Information Networking
• /
• v.30 no.5
• /
• pp.631-640
• /
• 2003

Because of multi-hop wireless communication, P2P applications in ad hoc networks suffer poor performance. We Propose neighbor caching strategy to overcome this shortcoming and show it is more efficient than self caching that nodes store data in theirs own cache individually. A node can extend its caching storage instantaneously with neighbor caching by borrowing the storage from idle neighbors, so overcome multi-hop wireless communications with data source long distance away from itself. We also present the ranking based prediction that selects the most appropriate neighbor which data can be stored in. The node that uses the ranking based prediction can select the neighbor that has high possibility to keep data for a long time and avoid caching the low ranked data. Therefore the ranking based prediction improves the throughput of neighbor caching. In the simulation results, we observe that neighbor caching has better performance, as large as network size, as long as idle time, and as small as cache size. We also show the ranking based prediction is an adaptive algorithm that adjusts times of data movement into the neighbor, so makes neighbor caching flexible according to the idleness of nodes

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.821-830
• /
• 2001

H.323 proposes to use Mobile IP and H.323 ad hoc conference signaling to provide Handoff function to a mobile terminal. But H.323 ad hoc conference signaling has a drawback. It requires an H.323 endpoint to do a complex conference signaling which makes inter-operability between H.323 endpoints difficult and takes the longer signaling time. In this paper, we propose an Handoff signaling using H.323 rerouting(Third party initiated Pause and Rerouting). H.323 rerouting signaling only requires an H.323 endpoint to do H.323 basic signaling in reestablishing media channel, and makes inter-operability more easier and provides the faster Handoff. To do this, our H.323 GK has derived H.245 control channel using tunneling for all H.323 calls including the fast connect calls which enable endpoints communicate each other if they don\`t have H.245 control channel. In order to evaluate the performance of the proposed signaling, we have conducted an experiment that compares a call transfer signaling using H.323 rerouting with ad hoc conference signaling in inter-operability and signaling delay. The results of our experiment shows that the call transfer signaling can inter-operate with four H.323 endpoints among five H.323 endpoints of other vendors and reduces the signaling delay average 1.4 sec.

• Journal of KIISE:Information Networking
• /
• v.35 no.1
• /
• pp.56-66
• /
• 2008

Contention-based forwarding in wireless ad-hoc networks reduces transmission failure rate by selecting one receiver with good channel among multiple receivers. However, contention-based forwarding may increase transmission latency due to the collision problem caused by the simultaneous transmission among multiple receivers. In this paper, we present an analytic model that reflects the delay and collision rate of contention-based forwarding in lossy wireless links. Through the analytic model, we calculate the expected delay and progress in one-hop transmission under given wireless link model and delay model. Based on the analytic results, we observe that delay model should be adapted to wireless link model for optimal performance in contention-based forwarding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.977-985
• /
• 2012

Recently, many countries have been developing new protocols to improve the performance of tactical ad hoc networks for implementing NCW (Network Centric Warfare). Combat net radio (CNR) networks are the most important communication infra for the ground forces such as infantry of Army. U.S. Army had developed MIL-STD-188-220D that is the Interoperability Standard for DMTDs (Digital Messages Transfer Device Subsystems) for voice and data communication in CNR. MIL-STD-188-220D is a candidate for MAC protocol of TMMR which is next radio and has a few constraints to used in TMMR. NAD (Network Access Delay) defined in MIL-STD-188-220D needs time synchronization to avoid collision. However, it is difficult for time synchronization to fit in multi-hop environment. We suggest the enhanced DAP (Deterministic Adaptable Priority)-NAD to prevent conflicts and decrease delays in multi-hop CNR. Simulation results show that the proposed scheme improves the performance in multi-hop CNR networks.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.493-498
• /
• 2011

In this paper, Transmission performance over MANET(Mobile Ad-hoc Networks) under DDoS Intrusions is evaluated. Intrusion counterplan requirement, which have to be used for MANET under DDoS intrusions, is suggested through this evaluation. VoIP simulator based on NS-2 network simulator is used for performance measurement. MOS, network delay, packet loss rate and call connection rate is measured with this simulation. Finally, requirement of intrusion continuing time shorter then 10 seconds is suggested for VoIP service over MANETs under DDoS intrusions.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.220-222
• /
• 2004

이동 애드 혹 망을 구성하는 노드들은 일반적으로 배터리 전력을 사용하기 때문에 이들의 에너지 소모량을 줄이는 연구들이 각 계층에 대해 이루어져 왔다. 몇몇 연구들은 매체 접근 제어 프로토콜로 많이 이용되는 IEEE 802.11 DCF의 전력 소비량을 줄이기 위한 전력 제어 기법을 제시하였다. 기본 전력 제어기법(BASIC Power Control Protocol)은 RTS-CTS와 DATA-ACK 에 대해서 각각 다른 전력을 적용하는 것이다. RTS-CTS는 최대 전력으로 전송되고, DATA-ACK는 불필요한 에너지 낭비를 줄이기 위해 최소한 의 필요한 전력으로 전송하였다. 그러므로 DATA-ACK의 전송범위(transmission range)와 전송파 감지영역(carrier sensing range)은 RTS-CTS의 영역보다 작아진다. 전송파 감지영역에서 RTS-CTS를 감지한 노드들은 신호를 올바로 해석할 수 없으므로 NAV 값을 EIFS로 설정한다. 이 EIFS 구간은 충돌을 막기에는 너무나 짧기 때문에. EIFS 구간이 지난 후에 채널이 비어있는 상태로 간주하고 전송을 시도하게 된다. 이에 따라 DATA-ACK 수신에 있어서 충돌율이 증가하게 되고 네트웍 전체 처리량이 감소하게 된다. 본 논문에서는 기본 전력제어 기법이 가지는 문제점을 해결하고 전체 네트웍 처리량을 향상 시킬수 있는 새로운 전력제어(Power Control) MAC 프로토콜을 제안하였다.